Displaying 1-57 of 57 products
Set of Height Adjustable Monitor Stands
For near-field monitors, Height adjustable over several steps from 93 - 115 cm, Set of 2 in a box
Set of Height-Adjustable Monitor Stands
For near-field monitors, Height adjustable from 93 - 115 cm, Load bearing capacity up to 45 kg, Length of each side of base 45cm, Set of 2 in a box
Table Tripod for Speakers / Monitors
Allows optimal angle of the speakers in the direction of listening position, Decouples the loudspeaker signal from the ground, Priced per pair
Monitor Stand
Cast round base, For direct mounting of monitors with 3/8" thread connection, e.g. Genelec 1029 monitors, or for fixing a mounting plate for...
Decouples loudspeaker signal from the ground
Monitor Stand
With tiltable mounting plate - from 0 ° to 12.5 °, Additional stop bar, Gradual height adjustment
Sturdy Monitor Stand
Tripod construction, Height adjustable, Adjustable rubber feet and spikes for balance compensation on uneven surfaces
Isolation stands for speakers / monitors
Height adjustable from 95 to 215 mm, Adjustable tilt up to 6.5 degrees, Allows you to adjust the speakers for an optimal dispersion pattern in the...
Monitor Stand
Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Load bearing capacity up to 25 kg,...
Loudspeaker Manager Software with Measurement Microphone
For the Genelec 8300 Studio Monitor series and 7300 Subwoofer series
Wall Mount
For Genelec 6010, 8010, 8020, 8030, 8040/8240, 1029/2029, G One, G Two, G Three, G Four, Turnable and tiltable
Table Stand
For Neumann KH120 speaker, Horizontally and vertically adjustable, Height adjustable
Table Stand for Studio Monitors
Suitable for 5" or 6" speakers, Ideal for placing studio monitors on the desk and acoustically decoupling
Table stand for speakers / monitors
2 Units, Adjustable inclination, Allows you to adjust the speakers for an optimal dispersion pattern in the direction of the listener, Isolates...
Tripod for Speakers / Sub-Woofer
Fixed height of 95 mm, Decouples the loud-speaker signal from the ground, Price per piece
Monitor Stand (pair)
High-quality monitor stand made from melamine resin coated chipboard, Simple and modern design, Low degree of vibration, Price is for a pair
Monitor Stand
Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Load bearing capacity up to 25 kg,...
Sturdy Steel Stand for Monitors
Tube combination adjustable in height via clamping screw and safety splint, For direct mounting of monitors with 3/8" thread connection, e.g....
Sturdy Monitor Stand
2 Column construction, Fixed height, Adjustable rubber feet and spikes for adapting to uneven floors
Suspension damper
Mechanical decoupling for studio monitors, hi-fi speakers, turntables, CD / DVD / BluRay players, preamplifiers etc., Based on two repulsive...
Decouples loudspeaker signal from the ground
Foam Base Pads
For decoupling monitor speakers, Increased resolution in mid-range frequencies, Improved definition of low frequencies, Reduces extraneous...
Table Stand for Studio Monitors
Suitable for 8" speakers, Ideal for placing studio monitors on the desk and acoustically decoupling, Height adjustable between 7.9 - 14.3 cm
Wall Mount for Studio Monitor
Suitable for Genelec 6010, 8010, 8020, 8030, G One, G Two and G Three
Monitor Stand
Isolation of the loudspeaker calibration by means of AERstop Pad on the upper platform, Adjustable height, Load bearing capacity up to 25 kg,...
Tripod AdapterThe tripod adapter plates allow the IsoPod feet of the 8000 series monitors to be used on table or floor stands with a 3/8 "thread, and tilt and vibration decoupling are also retained when using the tripod.
Suitable for Genelec 8030
Table Tripod
For all Genelec 8x3x Series loudspeakers, L-shape, Vertical and horizontal mounting of the loudspeaker possible, Inclinable by 20 degrees (in 10...
Truss Holder
Suitable for Genelec 6010, 8010, 8020, 8030, 8040, 8050, With 50 mm tube clamp, Incl. T-adapter
Mounting Adapter
For Neumann KH 120, Mounting adapter with M8 hole spacing of 70 mm, For mounting on the loudspeaker, M8 hole spacing of 115 mm for mounting on LH...
Decouples loudspeaker signal from the ground
Ceiling Mounting Including Telescopic Rod
Ceiling fixture for Adam S Series monitors, Requires Adam adapter plate (item 447775) and mounting bracket (both not included)
Table Stand
For Genelec loudspeakers of the series 8x3x, L-Form, Vertical and horizontal mounting of the speaker possible, Tiltable by 20 degrees in 10 steps...
Wall Mount for Monkey Banana Speakers
Suitable for Turbo 4, Turbo 5 and Turbo 6, Optimal distance to the wall as well as mounting at the right angle, The lateral angle as well as the...
Wall Mount
Suitable for EVE audio SC204 and SC205, Swivels and tilts, Mounting on the back of the monitor
Monitor Stand Set
Suitable for the Monkey Banana Turbo series (4/5/6/8), Made of metal, Set includes 2 tripods
Carrying Case
Padded carrying case for a pair of SC203 speakers as well as FlexiPads, power supply and connection cable, Separate compartment for tablet or 13"...
Mounting Plate
Suitable mounting plate for K&M Design monitor stand 26740
Tripod Adapter Plate
As an attachment for speaker stands, Ink. Small parts for fastening and 2x Allen keys
Stand Set
Monitor stands made of metal, Matching accessories for Monkey Banana Turbo series (4/5/6/8), Set includes 2 stands