Displaying 1-63 of 63 products
Table stand for monitor speakers
Infinitely height adjustable from 30-51 cm, Load bearing capacity up to 15 kg
Universal table stand for monitor speakers
Infinitely height adjustable from 25-40 cm, Table clamp isinfinitely adjustable from 20-55 mm, Load bearing capacity up to 15 kg
Monitor Table Stand
Rubber support surface for a stable stand of the monitor, Loadable up to 15 kg, Cable management, Four rubber feet reduce the sound transmission to...
Stand for Studio Monitors
Massive cast-iron foot, Black powder-coating, Height adjustable from 900 - 1500 mm
Smooth-running microphone desk arm
New design, With 3/8" threaded connector for studio and multimedia workstations, Internally guided microphone cable with 6 metre length, Clamping...
Screen/Monitor Stand
Suitable for flat screens from 42" - 65", Height can be adjusted in steps using an ergonomic height adjustment screw, Easy installation of the...
Vari-Tilt Studio Monitor Stand
Solid cast iron foot, Black powder coating, Height adjustable from 900 - 1500 mm
Speaker Stand
For Genelec 8000 series, Height adjustable 950 - 1430 mm, Only usable to connect with plates 8020-408, 8030-408, 8040-408 or 8050-408 or optional...
Stand for Monitoring Loudspeaker
Height adjustable from approximately 90 - 150 cm, +/- 10 ° Inclinable, Includes rubber pads and spikes for acoustic decoupling
Design Monitor Stand
For Genelec monitors from the 8000 series, Very stable, Gradual height adjustment is made by a positioning and clamping knob, Easy installation of...
Table Stand
For studio monitors and speakers, Each 4 rubber pads for floor and support plate for non-slip stand and decoupling
Monitor Stand (Pair)
High-quality monitor stand made from melamine resin coated chipboard, Simple and modern design, Vibration levels are kept to a minimum, Max. load...
Laptop Stand
Tripod laptop stand, Height adjustable from approx. 75 cm - 135 cm
Laptop Stand
Used with laptops and netbooks, Big plate of 400 x 290 mm, Adjustable inclination, Powder coated
Monitor Stands
Height adjustable 80-113 cm, Stable 3-tube construction, Shelf panels 30 x 30 cm with foam rubber, Base plates 35 x 35 cm with adjustable feet,...
Microphone desk arm
Smooth running table microphone arm with 3/8" threaded connector, For recording studios and multimedia workstations, Comfortable adjustment of the...
Laptop Holder
For mounting on Omega 18810 keyboard tables, Can also be used with the 18950 universal holder and 18953 piano stand, The incline of the holder can...
Table Stand
For studio monitors and loudspeakers, Non-slip base and mounting plate with 4 rubber pads each, Textured finish
Laptop Stand
Using with laptops and netbooks, Adjustable inclination, Powder coated
1 Pair per order, Shelf is adjustable in angle and axis, Perfect acoustic decoupling, Loadable up to 34 kg
Microphone
Supports microphones up to a weight of 2 kg, Hidden wiring inside the pipes and joints, Open cable ends (without XLRs), Stable aluminium...
Monitor Stand Set
Height adjustable 80-113 cm, Stable 3-tube construction, Shelf panels 30 x 30 cm with foam rubber, Base plates 35 x 35 cm with adjustable feet,...
Table Stand Set for Nearfield Monitors
Acoustic isolation above and below, Tilt angle adjustable in 0, 7 and 9 degrees, For horizontal use up to max. 25 kg loadable, With angled use up...
Steel Stand
For monitors, With stable, elegant cast-base, Oversized rod combination, Positioning and clamping knob allows gradual height adjustable, Depending...
Three-legged Monitor Stand
Height adjustable by means of clamping knob and safety splint, 205 x 245 mm mounting plate, Made in Germany
Microphone Table Clamp
Clamp for fastening to table edges, For Mika microphone arm systems
Table Stand for Studio Monitor
Mon-slip foam padding, Cab be inclined up to 45°, Inclination adjustable via knurled screw on the back
Microphone Arm
'On air' microphone arm, With red LED 'on air' signalling
Monitor Stand
With a stable tripod, Made from steel, Height adjustment using clamping knob and safety splint, Made in Germany
Table Microphone Arm
Aluminium construction, Locking centre joint, 5/8" Threaded connection, Table clamp, Pre-wired with XLR cable
Monitor Shelf
1 Pair per order, Shelf is adjustable in angle and axis, Perfect acoustic decoupling, Loadable up to 34 kg
Studio Light
Highly efficient multi-LED technology, Dimmer with memory and full brightness function, Robust aluminium construction, Hidden wiring inside the...
Rollable Stand
For mixing consoles and audio equipment, Height adjustment with locking bolt, Width and angle of the tray completely adjustable, Can be dismantled...
Studio Monitor Stand (pair)
Removable stand systems (decoupling spikes or rubber feet), Tripod adjustable in angle and alignment, Perfect acoustic isolation, Three integrated...
Studio monitor stand (pair)
Removable stand systems (decoupling spikes or rubber feet), Tripod adjustable in angle and alignment, Perfect acoustic isolation, Three integrated...
XL Microphone Arm
Supports microphones up to a weight of 2 kg, Open cable ends (without XLRs)
Studio Monitor Stand (pair)
Exchangeable stand systems (decoupling spikes or rubber feet), Perfect acoustic decoupling, Three integrated ducts for cables and for filling with...
Holder for Tablets
Suitable for tablet devices with an edge length of 160-300 mm, Retractable clamp adjustment adapts to the individual tablet size
Wall Mount for Studio Monitors
Universal wall bracket for near field monitors and small loudspeakers, Ideal for installing loudspeakers without their own mounting points, Shelf...
Table Support For Microphone Arm
1 Pair per order, Shelf is adjustable in angle and axis, Perfect acoustic decoupling, Loadable up to 34 kg
Stand Set for Studio Monitors
Height adjustable 80-113 cm, Stable 3-tube construction, Shelf panels 30 x 30 cm with foam rubber, Base plates 35 x 35 cm with adjustable feet,...
System Pole
17" (43.18cm), From aluminium, 14 x 12 x 10 cm, YT3240
Studio Monitor Stand
Perfect acoustic decoupling, 3 Integrated ducts for cables and for filling with sand, Loadable up to 34.0 kg
Stand for Laptop
For laptops up to 17", Velcro tape and special stoppers prevent the laptop from falling, Headphone holder, Strain relief for cables, Provides space...
Wall mount
Fits Yellowtec Mika boom, Complete with 4 dowels and 4 screws for wall mounting, With cover ring
Monitor Arm
Supports monitors with a weight of up to 10 kg, Equipped with QuickFix adapter (VESA 75/100), Adjustable resistance at the joints, Stable aluminium...
Rail for Wall Mounting
Prepared holes for wall fixation on the flat side
Extender brackets for K&M 42020 rack wagons
For 19" pieces of equipment, Perforated 9U rails, Incl. cage nuts and locking screws (16 pieces), Mounted by means of plugging and screwing