Displaying 1-40 of 40 products
8-Channel Microphone splitter
8 Inputs, 16 Outputs, Output Ground Lift switch per channel, Flexible input link switch, Phantom Power Link to Direct Out
Audio splitter
2 in 4 or 1 in 8, Each output can be controlled separately, XLR inputs/outputs
8-Channel microphone splitter
From eight symmetrical microphone signals (low impedance) -> 16 microphone signals (8 pairs), Direct output and a galvanic isolated output per...
1 in 3 microphone splitter
Jensen transmitter for high sound quality, Switchable 30 dB pad, Switchable Gnd / Lift, Robust metal housing, Installation of up to 8 units is...
Press box
Audio distributor, Electrically isolated audio splitters e.g. for press conferences and other applications, 1x XLR / f line in and 10x XLR / m out,...
Active splitter
2 to 4 or 1 to 8, XLR in-out, Balanced, Input levels adjustable from -12db / + 12dB, Built-in power supply (230V 50 Hz, 2.5VA), Max. input level...
19" Microphone Splitter
Low-noise, 8 Balanced XLR inputs, Each to a direct output and a transformer isolated output, Combine 2 channels to double or sum the outputs,...
Passive 4 channel line splitter
Nominal impedance 600 ohms, Max. input +20 dB, 19" / 1U, 5 Year warranty
Active re-amping box
Splitter for guitar amps, Converts a +4 dB signal into a hi-impedance signal for guitar amplifiers or effects pedals, 1x XLR in, 2x Jack out, Phase...
Microphone splitter
8 Channels, 8x XLR inputs, 16x XLR out, Direct output and a galvanic isolated output per transformer on each channel, Transit of phantom power to...
Switch for dynamic microphones
Suitable as a switch for communication with technicians, as a splitter for different microphone inputs and for different zones, and more, 1 XLR...
Stereo Press Box
Audio Splitter 2, Is used for press conferences, in order to distribute 1 speech microphone to 20 sending stations or recording devices...
Mic / Line Splitter
4 In / 16 Out, 4 Studio Grade Mic / Line Preamps, 48V switchable, Headphone output per input switchable, For each channel 4 outputs (also 1 In / 16...
Passive DI / Re-Amp / Expansion Splitter Box
6.3mm Jack instrument input, 6.3 mm Jack output, XLR line input, Mic level out XLR, Expansion I / O, 6.3 mm jack, Phase invert and pad switch
8-Channel microphone splitter
8 Balanced XLR inputs and 3 balanced XLR outputs per channel (1x direct and 2x galvanic isolated)
Active guitar splitter
For operation with several amps, Unbalanced jack input, Jack link out, Isolated jack out with switchable phase, Jack LoZ out, Adjustable gain,...
Press Box
Audio distribution, Is used for press conferences to distribute 1 red microphone to 20 send stations or recording devices galvanically separated,...
Splitter / Mixer
Passive, Four stereo input channels, Stereo output (all 6.3 mm jack connectors are stereo - tip, ring, sleeve)
8-Channel Microphone Splitter
Consists of eight balanced low-impedance microphone signals 16 microphone signals (8 pairs), Direct output and a transformer-isolated output in...
Passive microphone splitter
1 Input, 3 outputs, Switchable 30 dB pad, 2 XLR male outputs with switchable Ground Lift on each, Stable metal housing
Passive Line Level Splitter
1 XLR input, 5 XLR outputs, Neutrik connectors, Sturdy, compact aluminum housing with protective corners made of hard rubber
Y-Box Guitar Splitter
Clinking input with 1 Mohm input impedance, Output AMP1 as parallel circuit, Output AMP2 is electronically converted with a subsequent transformer...
2 Channel merge box for microphones
2x XLR female in 1x XLR male out, Balanced decoupling, Also suitable for condenser microphones, Impedance 200 ohm, Completely passive circuit,...
Microphone split box
2-Channel splitter box 1" in 3", Aluminium diecast housing, Ground lift switch
Signal merge box
2-Channel signal merge box for microphones, Switchable phantom power passage, Phase rotatable, From 2x XLR female in to 1x XLR male out, Balanced...
Passive line splitter with adjustable trim
XLR / jack combi input, 2 XLR outputs, Switchable gnd / lift per output, Jensen transformer, Dynamic range:140 dB, Robust metal housing
Microphone Splitter
1 Channel, 1 Direct and 1 transformer-isolated output, Phantom power is fed to the microphone via the Direct Out, Ground lift, PAD switch per input
Microphone Merger / Splitter
Phase reverse switch, Galvanic isolation of the channels, Ground lift switch, Main Mic Input XLR, Isolated mic input / merger XLR, Mic Main Out...
Line Summing / Merger
2 Channel active summed e.g. 2 mixing consoles to 1 PA system, Adjustable output volume, Switchable pad, Mute and mono per channel, XLR / Combi...
Passive Line Splitter with adjustable trim
XLR / jack combo input, 3 XLR outputs, Switchable ground / lift per output, Jensen transformer, Robust metal housing
Radial Engineering Relay Xo
Balanced signal switch, To switch the microphone signal from PA to intercom for technicians or musicians, Also suitable for 2 separate inputs on...
S / PDIF Audio Splitter
Distributes optical S / PDIF signals from one source and passes them to two devices in parallel, Supports uncompressed 2-channel LPCM (Linear Pulse...
Passive 3-Channel Preamp Selector
1 XLR in, 4 XLR out, Switchable 48 V phantom power, Switchable ground lift, Especially suitable for studio applications to switch a microphone to...
3-on-1 Microphone Switch
Connection for up to three microphones, which are alternately switched to one output, 1.5 m Breakout cable with 3 sockets XLR female and 1 male XLR...
Distribution
2 x 1 in 4/4 x 1 in 2, 2 x 2 Identical sections, each with one balanced input to two balanced outputs (4 x 1 in 2), Front switchable from 2 x 1 in...