Studio Accessories

For Yamaha DM2000, 44.1 - 96 kHz, D-Sub 25pin connector

See Details

8 Stereo hardware devices in any desired order, Put all your hardware for sums processing in any order and arrange your signal chain by drag & drop...

See Details

Second tier features 3x 3U rack units and space for screens and/or speakers

See Details

Second tier features 3x 3U rack units and space for screens and/or speakers

See Details

For Genelec monitors from the 8000 series, Very stable, Gradual height adjustment is made by a positioning and clamping knob, Easy installation of...

See Details

Reduces wind noise

See Details

Passive, Four stereo input channels, Stereo output (all 6.3 mm jack connectors are stereo - tip, ring, sleeve)

See Details

32 Channels Madi in/out via optical duplex SC-plugs, BNC in/out

See Details

Akai APC 40 - but not fit for APC40 MKII, From 7mm birch plywood, 22 x 22 mm aluminium edges, 2 Mini butterfly latches, 1 Handle, 10 mm Foam...

See Details

Session desk - The Basic Series, 2 x Upper rack 9U, Integrated footprint for near-field monitors, Cable management, Uncomplicated and fast...

See Details

With 19" rack and extractable keyboard shelf, Offers enough space for computer monitors (2x 30"), keyboard, mouse, DAW controllers, monitor...

See Details

Limited edition, With continuous monitor storage shelf, 2x 2 U rack trays, Extendable keyboard shelf (for up to 61 keys keyboards), Rear sliding...

See Details

1x 19" 3U plus 2x 19" 1 U rack shelf, Cable management under the table, Scrollable keyboard table for up to 88 keys instruments, Adjustable monitor...

See Details

Portable carrying case for 88 key digital piano / keyboards, e.g. RD-300NX, RD-700NX and FP-4F, Large outside pocket for accessories

See Details

Consists of eight balanced low-impedance microphone signals 16 microphone signals (8 pairs), Direct output and a transformer-isolated output in...

See Details

Card for integrating SL1642AI, SL2442AI, SL3242AI, RM16AI or RM32AI into a Dante network, 2 Dante ports, Allows redundancy operation, FireWire S800...

See Details

For YAMAHA DM 1000 with meter bridge without side panel, 9 mm birch plywood, coated black, 35 x 35 mm aluminium edges, Male /female lock profile,...

See Details

Suitable for Roland TR-8, Made of 7 mm birch plywood, Device can be operated in the case, Coated with phenolic resin, 22 x 22 mm aluminium profile,...

See Details

6x Coaxial BNC, 2x Optical SC, MADI Port Matrix, 1x MIDI I/O for remote control, 1x US B 2.0 for firmware updates, Device lock, Redundant power supply

See Details

For studio monitors and speakers, Each 4 rubber pads for floor and support plate for non-slip stand and decoupling

See Details

High-quality monitor stand made from melamine resin coated chipboard, Simple and modern design, Vibration levels are kept to a minimum, Max. load...

See Details

Extracts stereo or multi-channel audio from an HDMI signal and outputs it as an analogue (stereo mini-link) and digital audio signal (TOSLink &...

See Details

2 x Jack 6.3 mm mono male > Jack 6.3 mm stereo male, With Neutrik/Rean connectors (Rean is a registered trademark of Neutrik AG), Hand-soldered,...

See Details

For ADAT-compatible devices with the uTrack24, Recording of 24 tracks with simultaneous forwarding to an external device, 24 Channels at 24 bit /...

See Details

2-Channel Dante interface card for Tascam SS-CDR250N and SS-R250N, Up to 24 Bit / 96 kHz, RJ45 connector, Status indicator for network connection...

See Details

Suitable for Akai MPC 5000, From 7mm birch plywood, 25 x 25 mm aluminium edges, With 2 butterfly latches, 1x strap, Steel ball corners medium, Min....

See Details

Custom-made flight case for Dave Smith Instruments Tempest, Made of 7 mm birch plywood, 22 x 22 mm aluminium edges, Foam padding, 2 Sprung...

See Details

48-In, 48-Out, 3-pole patch panel for use in all areas of analog and digital transmission technology, High-quality, gold-plated contact wafers,...

See Details

Four mono- or two stereo input channels to four mono- or two stereo output channels for switching and mixing, Input gain can be adjusted via...

See Details

Tripod laptop stand, Height adjustable from approx. 75 cm - 135 cm

See Details

1 Input, 3 outputs, Switchable 30 dB pad, 2 XLR male outputs with switchable Ground Lift on each, Stable metal housing

See Details

From 7mm birch plywood, 25x25 mm aluminium edges, 2 Spring-loaded butterfly latches, 1 Leatherette grips, Steel corners, Upholster, Rubber feet,...

See Details

Second tier features 3x 3U rack units and space for screens and/or speakers

See Details

2x XLR male (left - right) > 6.3 mm stereo jack, Amphenol metal plug, Made in Germany

See Details

Additional compartment for 15" laptop, With front pocket for accessories such as power supply unit and cable, Analog Rytm MKI, Analog Rytm MKII,...

See Details

Made of water resistant 420D polyester fabric with PVC coating, Robust zipper fastener, Non-Slip rubber feet, With hook and loop handle and 2...

See Details

1 XLR input, 5 XLR outputs, Neutrik connectors, Sturdy, compact aluminum housing with protective corners made of hard rubber

See Details

16 channels of ADAT I / O via a single slot

See Details

Suitable for Tascam 2488 / MKII, 7mm birch plywood, 2 Sprung butterfly latches, 1 Strap handle with steel core, 4 Large rubber feet, 25 x 25 mm...

See Details

For Tascam DP-02 / 02CF, 22 x 22 mm aluminium edges, At least 1 cm foam padding, 1 Suitcase handle, 2 Mini butterfly locks, Small steel ball...

See Details

Offers enough space for computer monitors (2 x 30"), a keyboard, mouse, DAW controllers, monitor controller, etc., 3 x 19" / 4 U Rack units,...

See Details

Used with laptops and netbooks, Big plate of 400 x 290 mm, Adjustable inclination, Powder coated

See Details

2 x Jack male to 6.3 mm stereo jack female, Black mono jack plugs with gold-plated contacts, Thomann hook and loop fastener included

See Details

With zip

See Details

16 Channel extension for EtherSound Interface MY16ES-64 (Art.204005)

See Details

Second tier features 3x 3U rack units and space for screens and/or speakers

See Details

Portable absorber and diffusor, To be mounted behind the microphone, Reduces the transmission of unwanted room reflections, echoes and ambient...

See Details

Height adjustable 80-113 cm, Stable 3-tube construction, Shelf panels 30 x 30 cm with foam rubber, Base plates 35 x 35 cm with adjustable feet,...

See Details

Stretch bands for secure attachment of the L20 / L12, With shoulder-strap and carrying handle

See Details

2 x Mono jack 6.3 mm male > Mini jack 3.5 mm stereo male, With Neutrik/Rean connectors, Hand-soldered, With gold-plated contacts

See Details

XLR Male to 2x XLR Female, Sums up two signals from the mixer to one stereo signal, Suitable for In Ear Stick and Mini Bodypack

See Details

For 76 key keyboard, e.g. JUPITER-50, JUNO-Stage and V-Combo VR-700, Large outside pocket for accessories

See Details

Clinking input with 1 Mohm input impedance, Output AMP1 as parallel circuit, Output AMP2 is electronically converted with a subsequent transformer...

See Details

2-Channel merge box for line signal

See Details

MADI Interface Card for Tascam DA-6400, 1 MADI In/Out/Thru coaxial BNC connector, 1 MADI In/Out optical

See Details

RAVEN Core Station side panels in silver, Padded armrest made of leather, Modular table, Cable ducts on the back of the work surface, Hidden...

See Details

Can be operated directly as a standalone or in conjunction with D & R Airmate / Airance / Axum, Cable and mounting holes on the back, 12 Volt / 450...

See Details

Water repellent material, Transparent window, Reinforced top and bottom, Detachable element for microphone inputs, With belt loop

See Details

Zoom F8 transport bag, Stable bag for safe transport, Integrated kick stand, Storage compartments for accessories such as XLR and jack plugs, Easy...

See Details

With carrying handle, shoulder strap and compartments for power and audio cables

See Details

2x XLR female in 1x XLR male out, Balanced decoupling, Also suitable for condenser microphones, Impedance 200 ohm, Completely passive circuit,...

See Details

For DM2000, DM1000, 02R96 and 01V96 24 bit AD converters

See Details

YT3601, Size M

See Details

Smooth running table microphone arm with 3/8" threaded connector, For recording studios and multimedia workstations, Comfortable adjustment of the...

See Details

2x XLR male mini jack stereo with gold-plated contacts, 15 cm split

See Details

For the ISOVOX 2 Booth, Hard shell construction, 2 Transport rollers, Extendable handle, Attached accessory bag

See Details

2-Channel splitter box 1" in 3", Aluminium diecast housing, Ground lift switch

See Details

Robust and modern studio design, With cable outlets and storage compartment, Offset monitor shelf with cable outlet under the worktop, Sides, front...

See Details

For mounting on Omega 18810 keyboard tables, Can also be used with the 18950 universal holder and 18953 piano stand, The incline of the holder can...

See Details

3.5 mm Mini jack stereo to 2x 6.3 mm jack mono HICON plug, Colour-coded 6.3 mm jack plug, 5-Year manufacturer's warranty

See Details

For Clavia Nord Drum 3P, With carrying handle and shoulder strap

See Details

24 Bit/192 kHz for retrofitting for V100/V181/V200

See Details

Sony serial 9pin interface for connecting to professional video systems, Serial 9 replaces the existing MIDI card and, in addition to the MIDI...

See Details

For Korg D3200 Multitrack Recorder, 25 x 25 mm aluminium edges, Internal CD-R / RW drive is freely accessible, Medium ball corners, 2 Spring loaded...

See Details

For Akai MPC 2000 XL Groovebox, 25 x 25 mm aluminium edges, Medium ball corners, 4 Rubber feet, 2 Spring loaded butterfly latches, 1 Suitcase...

See Details