Displaying 751-785 of 785 products
Power Adapter
12V DC / 500mA, 230V, Euro plug, Suitable for Doepfer D3M
Silicone sleeve / cover
Suitable for Apogee Jam and Apogee Jam 96k (not included)
Rode iClamp
Auxiliary support made of unbreakable hard plastic to stabilise the Rode iXY to an iPhone 4 or iPhone 4S, So that the microphone stays absolutely...
Silicone sleeve / cover
Suitable for Apogee Jam and Apogee Jam96k (devices not included)
Adapter@Robust sheet steel element
Two StudioLive 16.4.2 can be permanently combined to a 32-track console
Accessory Kit
For controlling additional Genelec 8200 and 7200 DSP systems, Consists of network interface, labelling strips as well as network and USB cables...
Dust Cover
Fits the Livid DS-1, Protects against dust, dirt, liquids and impacts, Custom fittet, Fits precisely, leaving cables in place, Milky transparent...
Battery adapter
For 4 AA batteries, Suitable for all devices of the MixPre series
19" Mounting bracket set
For mounting a MC device to the rear side of a 19" rack, Device is mounted vertically onto the rear rack rails, Front panel will in doing so be...
Quick-change head
Fits on conventional stands upgraded with the IO-R quick-change system and on all TRIAD systems, Higher load capacity
19" Rack Mount Kit
For ADC1, DAC1 or MPA1, Comprises rack mount panel and rack mount coupler, Mounting screws included
Camera mounting plate
For the MixPre-D, To be mounted onto the camera or tripod head
Mount for cameras and webcams
For mounting cameras via 1/4" thread, Integrated ball-and-socket joint for setting the ideal camera angles, Compatible with MiKA microphone arms
Rack Mount
Robust, road-compatible rack mounting frame for up to 3 devices of the MA2CHBOX / EXBOX series, 1 U / 19"
On-air illuminated sign
WIth GPI input, Internal active electronics for contact control, Continuous light or flashing light mode, Employs 2x 25 W light bulbs (E27 screw)
Horizontal Joining Kit
For mounting of two Rupert Neve Designs PORTICO (5012,5042, 5032) into a 19" rack
Protective Case
Accessory for the protection and transport of Roli blocks, Case is magnetically attached to the blocks, Flexible and foldable cover protects the...
Split adapter for microphone / headphones
"T-Style", Separation of 4-pin connector into microphone input and headphone output, Record and listen simultaneously
Mount for cameras and webcams
For mounting cameras via 1/4" thread, Integrated ball-and-socket joint for setting the ideal camera angles, Compatible with MiKA microphone arms
Wall mount / table tripod
For Dynaudio Core 7 and 47, 0 - 30 Degrees vertically and +/- 45 degrees horizontally adjustable, VESA 200 x 200 compatible, Loadable up to 25 kg
MIC-LIVE Light
With RGB LEDs, Internal electronics with two external switching inputs (on ground), "Single Flush" model for wall mounting points left / right,...