Acoustic Treatment

Made of rubber for insulation and sound decoupling for frame constructions of physical structures, Achieves significantly reduced sound...

See Details

For Mid and High frequencies, Complete absorption above 500 Hz, Effective acoustic element for the optimization of room sound, For best possible...

See Details

Decoupled amp or subwoofer from the ground, Equipped with a carrying handle, Auralex PlatFoam Support surface (below)

See Details

Addirional segment, Connector included, Extension for A2466 panel systems

See Details

3 piece(s) Clearsonic S2224 (S2D) Sorber 7-pack, 2 piece(s) Clearsonic S2224 (S2D) Sorber 2-pack, 2 piece(s) Clearsonic Standard Support Bar,...

See Details

Contains 2 side walls and 1 ceiling module, Extends the cabin by about 65 cm in width, Used material corresponds to VicBooth Premium, Acoustic foam...

See Details

Absorber, Flame-retardant in accordance to MVSS 302 (flame rate, Building material class B3, in accordance with DIN 4102, Set includes 6 individual...

See Details

Made of compressed fibreglass and encased in dark grey fabric, This absorber is mainly used as a centre piece for the clearsonic cover system...

See Details

Absorber for optimising the room acoustics, The precisely cut plates allow the combining different acoustic models (e.g. WAW-7), The absorption...

See Details

For live and studio, Sound and sound shielding of drum kits, amplifiers or instruments, Essential for volume control on the stage and in the studio...

See Details

Portable and easy to shift, Expandable with other VicTotems elements, Allows the alteration of the acoustic properties of almost every room

See Details

Especially designed to absorb intermediate and high frequency sound waves (>125 Hz / approx.), Without Fixing material (optional, FlexiFit,...

See Details

Pad for acoustic decoupling of pad controllers and instruments, Compatible with NI Maschine MK3, NI Maschine Jam, Akai MPC Studio, Akai Fire,...

See Details

Portable and easy to shift, Expandable with other VicTotems elements, Allows the alteration of the acoustic properties of almost every room

See Details

Absorber core made of 100% polyester with textile cover, Highly robust, Non-allergenic and contains no irritants, Odorless, Most efficient in the...

See Details

Universal modular absorber walls, Very good sound absorbing properties, Wide absorption, High degree of sound insulation, Construction in minutes...

See Details

Full Range Absorber Tube, Operates until the bass range, Effective against rumbling bass and standing waves, For recording and control rooms as...

See Details

For extending A2448 and A2466 panels, Made of high quality laser-cut acrylic, Consists of 7 segments with connectors (hinges) and 7 extension...

See Details

For medium and high frequencies, Complete absorption above 500 Hz, Effective acoustic absorbers to optimize the sound of the room, For the best...

See Details

Made of compressed fibreglass and encased in dark grey cloth, The panel can also be mounted on the inside of the acrylic ClearSonic shields, For...

See Details

For studio monitors, For the decoupling of monitors from their support surface, Incl. inclination inserts, Price for pair

See Details

Absorber for optimizing room acoustics, High-quality polyester acoustic foam with high density (45 kg / m3) and dense structure especially for the...

See Details

Pad for acoustic decoupling of pad controllers and instruments, Compatible with NI Maschine Studio, Akai MPC X, Ableton Push and more

See Details

To optimise room acoustics, Due to the exact cut of the individual pieces, it is easy to combine different t.akustik models (for example WAS-7),...

See Details

Absorber tiles made of compressed fiberglass and encased in light gray cloth, The panel can also be mounted on the inside of the acrylic ClearSonic...

See Details

Universal modular absorber walls, Very good sound absorbing properties, Wide absorption, High degree of sound insulation, Construction in minutes...

See Details

Reduces the influence of space when recording guitar and bass amp speakers, Mount for two microphones at the same time, Integrated...

See Details

Suitable for the separation of different instruments, Useable vice versa - membrane on one side reduces high frequencies, Very suitable for a...

See Details

Compatible with Spectrum 2 products, Ideal for flush mounting, Includes screws and wall plugs

See Details

Water-based glue for studio foam and diffusers (depending on the thickness), Cartridge can be used with a standard silicone syringe, 1 tube is...

See Details

For ceiling mounting, Compatible with Spectrum 2 products, Extends sound absorption at low frequencies through a gap of 75 mm above the absorber,...

See Details

Made of acoustic foam and wood, Well suited to absorb Mid and high frequencies, Solves Flutter echo problems, At 45 degrees mounting fits in the...

See Details

Universal modular absorber walls, Very good sound absorbing properties, Wide absorption, High degree of sound insulation, Construction in minutes...

See Details

Reduces the absorption of undesirable noises such as room reflections and echoes, Lightweight and flexible design, Quick installation, Variable in...

See Details

To optimise room acoustics, Flame retardant according to FMVSS 302 Burn rate, Set of 6 modules

See Details

Universal modular absorber walls, Very good sound absorbing properties, Wide absorption, High degree of sound insulation, Construction in minutes...

See Details

To optimise room acoustics, Flame retardant according to FMVSS 302 Burn rate, Set of 6 modules

See Details

Specially designed for corner mounting, Absorber made of acoustic foam and wood, Designed to influence low frequencies in a room, Elegant wooden...

See Details

Acoustic element for low to medium frequency range, To optimize the surround sound in recording studios, home theaters, conference and office rooms...

See Details

For mid and high frequencies, Package includes 8 pieces

See Details

Compatible with Spectrum 2 products, Includes screws and wall plugs

See Details

Universal absorber for the Mid and High frequency range, Set with 12 pieces, For handling and attaching Acoustic adhesive 177265 is recommended

See Details

Set contains 36 single units for individual attachment, The sum of all 36 single pieces equals approx. 1.44 m² ( corresponding 4 times the size of...

See Details

Universal absorber for the Mid and High frequency range, Set with 12 pieces

See Details

For controlling the resonance behaviour of a bass drum, Adjustable for any size of bass drum

See Details

To optimise room acoustics, Set includes 6 modules, Flame retardant according to FMVSS 302 Burn rate

See Details

For live and studio applications, Noise and sound shielding of drum kits, amplifiers or instruments, Easy handling by folding accordion-style...

See Details

Perfect support for several Superbass Extreme Panels arranged one above the other, without wall surfaces

See Details

For acoustically decoupling monitors, subwoofers, guitar or bass amplifiers as well as other devices, Combination of rubber, MDF and foam

See Details

For Mid and High frequencies, Complete absorption above 500 Hz, Effective acoustic element to optimize the room sound, For best possible room...

See Details

Full absorption above 500 Hz, For optimising surround sound in recording studios, home theatres, and in home recording applications, Includes 4...

See Details

Panel for extending A2448 and A2466 panels, Made of high-quality, laser-cut acrylic, Consisting of 5 panels hinge and 5 H-channels, Each panel is...

See Details

Absorber, Flame-retardant in accordance to MVSS 302 (flame rate, Building material class B3, in accordance with DIN 4102, Set includes 4 individual...

See Details

For Mid and High frequencies, Complete absorption above 500 Hz, Effective acoustic element for the room sound optimization, For best possible room...

See Details

Very robust, Non-allergenic and doesn't contain irritants, Odour-free, Good efficiency in the medium and high frequency ranges, Wall and ceiling...

See Details

Panel to extend A2448 and A2466 panels, Made of high-quality, laser-cut acrylic, Consists of 5 panels with hinges and 5 H-channels, Illustrations...

See Details

Noise and sound shielding for amplifiers or instruments, Easy handling by folding in "accordion-style", Made of high-quality, laser-cut acrylic,...

See Details

Absorber for optimising the room acoustics, The precisely cut plates allows for combining with various acoustic models (e.g. WAS-7), The absorption...

See Details

Includes 8 convoluted foam sheets, Flame retardant in accordance to MVSS 302 (burn rate

See Details

Compatible with Spectrum 2 products, Including screws and wall plugs

See Details

Sound and sound shielding of amplifiers or instruments, Easy handling by folding in accordion style, Essential for volume control on the stage and...

See Details

Universal absorber for the Mid and High frequency range, Set with 6 pieces

See Details

Perfect hold for Super Bass Extreme Panels, without wall surfaces

See Details

Panel to extend A2448 and A2466 panels, Made of high-quality, laser-cut acrylic, Consisting of 6 panels with hinge and 6 H-channels, Illustrations...

See Details

For Mid and High frequencies, Complete absorption above 500 Hz, Effective acoustic element to optimize the room sound, For best possible room...

See Details

Panel for extending A4 and A5 panels, Made of high-quality, laser-cut acrylic, Consisting of 7 hinges and 7 H-channels, Each panel is 6.35 mm...

See Details

Perfect hold for Super Bass Extreme Panels, without wall surfaces

See Details

To optimise room acoustics, The precisely cut tiles allow combining and assembling different "the t.akustik" models (for example, WAW-7), The...

See Details

For Mid and High frequencies, Complete absorption above 500 Hz, Effective acoustic elements for the optimization of room sound, For best possible...

See Details

To optimise the room acoustics, Set includes 6 modules, Flame retardant according to FMVSS 302 Burning rate

See Details

Panel for extending the A2448 and A2466 panels, Made of high-quality, laser-cut acrylic, Consists of 4 panels with connectors (hinge) and 4...

See Details

Absorber core made of 100% polyester with textile cover, Highly robust, Non-allergenic and contains no irritants, Odorless, Most efficient in the...

See Details

For Mid and High frequencies, Complete absorption above 500 Hz, Effective acoustic element to optimize the room sound, For best possible room...

See Details

Compatible with Spectrum 2 products, Includes screws and wall plugs

See Details

Universal modular absorber walls, Very good sound absorbing properties, Wide absorption, High degree of sound insulation, Construction in minutes...

See Details