Displaying 1-24 of 24 products
Installation Power Amplifier
1 stereo RCA input, 1 stereo RCA output, 1 XLR input and output, 1 Jack input and output, Binding post for loudspeakers 70 V / 100 V / 4 Ohm
4-Channel Class D Amplifier
For 70 V and 100 V loudspeakers, High performance power supply, Euroblock inputs and outputs, Separate gain control for each channel, Signal...
1x 3.5 mm Jack input, 2x RCA (L/R) input, Master controller, Tone control (treble/bass), RCA (L/R) Aux output, 2 Stereo terminal connections for...
One channel amplifier
Fanless (noiseless in operation), Removable gain knob on the front which can be capped by means of a blind cover, XLR input
1 Microphone / line input, 2 RCA (L/R) inputs, Master control, Tone control (Treble /bass), RCA (L/R) Aux output, 2 Stereo binding posts for...
2-Channel 100 V Power Amplifier
2x240W can be bridged with 1x480W, Adjustable bass and treble, Frequency range 35 - 22,000 Hz, Signal-to-noise ratio > 95 dB, Incl. 19" rack mounts
Very quiet fan (temperature controlled), Detachable gain knobs on the front which can be sealed by means of blind covers, XLR inputs, Binding post...
Fully programmable 3-channel digital amplifier with convections cooling, Internal DSP, Fully parametric 4-band equaliser, RS232 Control, All main...
2 Inputs RCA (L / R), Master control, Tone control (treble / bass), AUX Output RCA (L / R), 2x Touch-proof Euroblocks for speakers, EQ
ELA Amp 240W/100V, 4 Ohm outlet, Two-stage fan, 24 V Emergency connector, XLR In/out, Ground lift
4-Channel Class D Installation Amplifier
2 x 120 W with 70 V / 100 V outputs, 2 x 150 / 90 W for 4 / 8 Ohm impedances, Euroblock inputs and outputs, Separate gain control for each channel,...
240 W @ 100 V, Program and priority line input, 24V Output, XLR/Jack combo input
4 Ohm outlet, Two-stage fan, 24 V Emergency connector, XLR In/out, Ground lift
2-channel, 2 x 120 W / 100V, Very quiet temperature controlled fan, Gain potentiometer at the front, XLR inputs, 6-Year warranty
Single channel ELA Amplifier
With passive cooling, Jack and RCA input, Spring-loaded output terminals
Digital amplifier for top hat rail mounting
Ideal for small permanent installations in the POS, museums, Power supply from 12-24 Volt, Balanced and unbalanced inputs, Summing amplifier at...
For induction loops up to 400 sqm, Built-in compressor, Loops from 0.2 and 1.2 ohms, Balanced audio input
Loop Induction Amplifier
For induction loops up to 700 sam, Built-in compressor, Loop fit of 0.3 O and 2.2 O ohms, Automatic check of the loop, Balanced audio input,...
Loop Amplifier For Induction Loops Up To 1000 sq m
Built-in compressor, Loops from 0.5 to 3 Ohms, Balanced audio input, Incl. Rack kit to install 19"/ 1U
Digital 100 V-Ela Power Amplifier
2x 250 W RMS, Only 9 W in standby mode, 90% Efficiency, DIN EN 60849 / VDE 0828, Adjustable bass, Treble and volume, 90 - 20,000 Hz, Switchable...
Digital ELA 100V Amp for top hat rail mounting
Ideal for small fixed installations in the area of ELA, POS, museums, Power supply from 12-24 Volt, Balanced inputs, Summing amplifier at input,...