Power Amps

Consisting of:, 1x the t.racks Achat DSP 24, 1x power strip, 1x Achat connection panel, 1x Thon 5U Case, Completely wired and set up!

See Details

Switched-mode Power Supply Amplifier, 2x 1500 W/ 4 Ohm, 2x 1000 W/ 8 Ohm, 1x 2865 W/ 8 Ohm (bridge mode), XLR input and output, Speaker twist...

See Details

2 XLR/Jack combination inputs, 2 Speaker Twist outputs, Limiter

See Details

Jack/TRS cable (6.3 mm), Includes nylon transport bag

See Details

1x the t.amp TSA 4-700 Power amplifier with switched-mode power, 1x the t.racks Achat DSP 24, 1x power strip, 1x Achat connection panel, 1x Thon 3U...

See Details

With 600 W Class-D amplifier from the Elements system, Connection of max. four mid/high units or max. two subwoofers or a subwoofer with max. two...

See Details

Power Amplifier, Short circuit protection, Limiter, Fan (not temperature controlled)

See Details

Short circuit protection, Protection against overheating, Limiter, Standby circuit

See Details

1 stereo RCA input, 1 stereo RCA output, 1 XLR input and output, 1 Jack input and output, Binding post for loudspeakers 70 V / 100 V / 4 Ohm

See Details

4 x 1670 W / 4 ohm, 4 x 1220 W / 8 ohm, 2 x 4000 W / 8 ohm, Power Twist connector

See Details

With low rack installation depth of just 308 mm, 2 x 190 W at 4 ohms, 2 x 120 W at 8 ohms (@ 1 kHz, THD

See Details

With low rack installation depth of just 308 mm, 2 x 190 W at 4 ohms, 2 x 120 W at 8 ohms (@ 1 kHz, THD

See Details

For 70 V and 100 V loudspeakers, High performance power supply, Euroblock inputs and outputs, Separate gain control for each channel, Signal...

See Details

4x 490 W/ 8 Ohm, 4x 810 W/ 4 Ohm, 4x 930 W/ 2 Ohm, 2x 1600 W/ 8 Ohm (bridge mode), 2x 1800 W/ 4 Ohm (bridge mode), XLR inputs and outputs, Speaker...

See Details

1x 3.5 mm Jack input, 2x RCA (L/R) input, Master controller, Tone control (treble/bass), RCA (L/R) Aux output, 2 Stereo terminal connections for...

See Details

Fanless (noiseless in operation), Removable gain knob on the front which can be capped by means of a blind cover, XLR input

See Details

Class D, Built-in DSP, 4 XLR inputs, 4 Speaker twist outputs

See Details

1 Microphone / line input, 2 RCA (L/R) inputs, Master control, Tone control (Treble /bass), RCA (L/R) Aux output, 2 Stereo binding posts for...

See Details

With Class-D circuit, 24 dB Linkwitz-Riley crossover, Input Sensitivity 1.4 or 0.775 V, Large front display for easy operation, Black-Out mode...

See Details

2x240W can be bridged with 1x480W, Adjustable bass and treble, Frequency range 35 - 22,000 Hz, Signal-to-noise ratio > 95 dB, Incl. 19" rack mounts

See Details

Lightweight 2-channel Class D amplifier, Integrated crossover, Integrated limiter, Mains, signal and limit LEDs

See Details

With low rack installation depth of just 308 mm, 2 x 190 W at 4 ohms, 2 x 120 W at 8 ohms (@ 1 kHz, THD

See Details

Professional power amplifier, 2x 1500 W at 4 ohm, 2x 1100 W at 8 ohm, 2x 1800 W at 2 ohm, 2 Ohm stable, Built-in limiter, Softstart, Fully...

See Details

Very quiet fan (temperature controlled), Detachable gain knobs on the front which can be sealed by means of blind covers, XLR inputs, Binding post...

See Details

With Class D circuit, 24 dB Linkwitz Riley crossover, Input sensitivity 1.4 or 0.775 V, Big front display for easy handling, Black out mode...

See Details

Fully programmable 3-channel digital amplifier with convections cooling, Internal DSP, Fully parametric 4-band equaliser, RS232 Control, All main...

See Details

Security settings

See Details

2 Inputs RCA (L / R), Master control, Tone control (treble / bass), AUX Output RCA (L / R), 2x Touch-proof Euroblocks for speakers, EQ

See Details

XLR input and output, Short-circuit fuse, Overtemperature protection, Limiter, Amplifier class H

See Details

ELA Amp 240W/100V, 4 Ohm outlet, Two-stage fan, 24 V Emergency connector, XLR In/out, Ground lift

See Details

Short circuit protection, Limiter, Fan (not temperature controlled)

See Details

2 x 120 W with 70 V / 100 V outputs, 2 x 150 / 90 W for 4 / 8 Ohm impedances, Euroblock inputs and outputs, Separate gain control for each channel,...

See Details

Limiter, XLR and 6.3 mm jack inputs, Speaker Twist & binding post outputs, Short-circuit protection

See Details

240 W @ 100 V, Program and priority line input, 24V Output, XLR/Jack combo input

See Details

For input channels 1 and 2 as well as 3 and 4 bridged use is possible via switch, Short circuit protection, Overheating protection, Limiter,...

See Details

For input channels 1 and 2 as well as 3 and 4 bridged use is possible via switch, Short circuit protection, Overheating protection, Limiter,...

See Details

4 Ohm outlet, Two-stage fan, 24 V Emergency connector, XLR In/out, Ground lift

See Details

Linear power amplifier for studios, events and Hi-Fi applications, Convection-cooled for silent operation (no fan), Protection circuits for DC...

See Details

2-channel, 2 x 120 W / 100V, Very quiet temperature controlled fan, Gain potentiometer at the front, XLR inputs, 6-Year warranty

See Details

For fixing directly to flat panel displays or in suspended ceilings, Input via mini jack, Output via phoenix terminal block, Power supply via...

See Details

Built-in crossover, Integrated limiter, Mains, signal and limit LEDs

See Details

With passive cooling, Jack and RCA input, Spring-loaded output terminals

See Details

DSP controlled, Crossover with high and low pass, Each channel with 6/ 12/ 18/ 24 dB per octave and switchable polarity, Output EQ with 8...

See Details

Ideal for small permanent installations in the POS, museums, Power supply from 12-24 Volt, Balanced and unbalanced inputs, Summing amplifier at...

See Details

With low rack installation depth of just 308 mm, 2 x 190 W at 4 ohms, 2 x 120 W at 8 ohms (@ 1 kHz, THD

See Details

2x 100 W at 4 ohms, 2x 65 W at 8 ohms, Balanced inputs with XLR and jack, Bridge mode possible, Speaker Twist and binding posts for speaker out,...

See Details

Class-D power amplifier, DSP configuration on front panel or via USB connection and PDX controller software on PC, LCD display, Adjustable gain,...

See Details

With low rack installation depth of just 308 mm, 2 x 190 W at 4 ohms, 2 x 120 W at 8 ohms (@ 1 kHz, THD

See Details

For induction loops up to 400 sqm, Built-in compressor, Loops from 0.2 and 1.2 ohms, Balanced audio input

See Details

Dampening factor > 220 at 8 Ω, This amplifier has a speed controlled cooling fan with right to left air flow

See Details

For fixing to the back of small, passive speakers, Output via short cable with open cable ends for direct connection to the speaker terminals,...

See Details

For induction loops up to 700 sam, Built-in compressor, Loop fit of 0.3 O and 2.2 O ohms, Automatic check of the loop, Balanced audio input,...

See Details

Class D, 4 x 500 W @ 4 Ω, 4 x 250 W @ 8 Ω, Temperature controlled, Low rack installation depth (only 240 mm)

See Details

Built-in compressor, Loops from 0.5 to 3 Ohms, Balanced audio input, Incl. Rack kit to install 19"/ 1U

See Details

2 x 75 W at 4 ohms, 2 x 45 W at 8 ohms, Balanced inputs with XLR and jack, Bridgeable, Speaker Twist and terminal connections for speaker out, All...

See Details

2x 250 W RMS, Only 9 W in standby mode, 90% Efficiency, DIN EN 60849 / VDE 0828, Adjustable bass, Treble and volume, 90 - 20,000 Hz, Switchable...

See Details

4x 550 W/ 4 Ohm, 4x 350 W/ 8 Ohm, 2x 1000 W/ 8 Ohm (bridge mode), XLR inputs, Speaker twist outputs

See Details

Ideal for small fixed installations in the area of ELA, POS, museums, Power supply from 12-24 Volt, Balanced inputs, Summing amplifier at input,...

See Details

2 Gain controls, Switchable crossover, GuardRail, Detachable power cable, Dimensions (W x H x D) 483 x 89 x 257 mm

See Details

With Class-D circuit, 24 dB Linkwitz-Riley crossover, Input sensitivity 1.4 or 0,775 V, Large front display for easy operation, Black-Out mode...

See Details

2x 450 Watt/4 Ohm, 2x 330 Watt/8 Ohm, 900 Watt/8 Ohm bridge mono, Signal to noise ratio > 100 dB, Damping factor > 200, XLR/RCA input, Speaker...

See Details

XLR input and output, Short-circuit fuse, Oertemperature protection, Limiter, Standby circuit

See Details

Bridge mode 1 x 4000 W at 4 ohm, 1 x 2800 W at 8 ohm

See Details

2 x 750 W / 4 Ohm, 2 x 500 W / 8 Ohm, 1500 W / 8 Ohm Bridge Mono, Signal To Noise Ratio > 100 dB, Damping Factor > 200, XLR/RCA input, Speaker...

See Details

2 Ohm-stablity, Intuitive system control software for easy setup and control, Balanced XLR In / Out, Speaker twist connections

See Details

2 x 150 W at 4 ohms, 2 x 85 W at 8 ohms, Balanced inputs with XLR and jack, Bridgeable, Speaker Twist and binding post outputs for LS Out, All...

See Details

Short circuit protection, Limiter

See Details

2 Ohm-stable, Intuitive system control software for easy setup and control

See Details

Crossover with high- and low pass, Per channel with 6/12/18/24 dB per octave and switchable polarity, Output EQ with 8 parametric filters per...

See Details

2x 1350 W/ 4 Ohm, 2x 1000 W/ 8 Ohm, 2700 W/ 8 Ohm bridge mono, Signal-to-noise ratio > 100 dB, Damping factor >200, XLR/ RCA connector input,...

See Details

Damping factor 300:1/ 1kHz/ 8 O, Short circuit protection, With limiter, Not temperature controlled

See Details

DSP-controlled, Crossover with high and lowpass per channel with 6/12/18/24 dB per octave and switchable polarity, Output EQ with 8 parametric...

See Details

2x 910 W/ 4 ohm, 2x 590 W/ 8 ohm, 2x 1200 W/ 2 ohm, 1x 1800 W/ 8 ohm (bridge mode), 2400/ 4 Ohm (bridge mode), XLR Input and output, Speaker twist...

See Details

With Class D circuit, 24 dB Linkwitz Riley crossover, Input sensitivity 1.4 or 0.775 V, Big front display for easy handling, Black out mode...

See Details

Built-in crossover, Integrated limiter, Mains, Signal and Limit LEDs

See Details