Displaying 1-75 of 117 products
Consisting of:, 1x the t.racks Achat DSP 24, 1x power strip, 1x Achat connection panel, 1x Thon 5U Case, Completely wired and set up!
the t.amp TSA 4000
Switched-mode Power Supply Amplifier, 2x 1500 W/ 4 Ohm, 2x 1000 W/ 8 Ohm, 1x 2865 W/ 8 Ohm (bridge mode), XLR input and output, Speaker twist...
2 XLR/Jack combination inputs, 2 Speaker Twist outputs, Limiter
Supplementary Bass Amplifier
Jack/TRS cable (6.3 mm), Includes nylon transport bag
1x the t.amp TSA 4-700 Power amplifier with switched-mode power, 1x the t.racks Achat DSP 24, 1x power strip, 1x Achat connection panel, 1x Thon 3U...
System Power Amplifier
With 600 W Class-D amplifier from the Elements system, Connection of max. four mid/high units or max. two subwoofers or a subwoofer with max. two...
the t.amp TA 2400 MK-X
Power Amplifier, Short circuit protection, Limiter, Fan (not temperature controlled)
Short circuit protection, Protection against overheating, Limiter, Standby circuit
Installation Power Amplifier
1 stereo RCA input, 1 stereo RCA output, 1 XLR input and output, 1 Jack input and output, Binding post for loudspeakers 70 V / 100 V / 4 Ohm
Amplifier with power supply
4 x 1670 W / 4 ohm, 4 x 1220 W / 8 ohm, 2 x 4000 W / 8 ohm, Power Twist connector
With low rack installation depth of just 308 mm, 2 x 190 W at 4 ohms, 2 x 120 W at 8 ohms (@ 1 kHz, THD
Stereo Power Amplifier
4-Channel Class D Amplifier
For 70 V and 100 V loudspeakers, High performance power supply, Euroblock inputs and outputs, Separate gain control for each channel, Signal...
Switched-mode Power Supply Amplifier
4x 490 W/ 8 Ohm, 4x 810 W/ 4 Ohm, 4x 930 W/ 2 Ohm, 2x 1600 W/ 8 Ohm (bridge mode), 2x 1800 W/ 4 Ohm (bridge mode), XLR inputs and outputs, Speaker...
1x 3.5 mm Jack input, 2x RCA (L/R) input, Master controller, Tone control (treble/bass), RCA (L/R) Aux output, 2 Stereo terminal connections for...
One channel amplifier
Fanless (noiseless in operation), Removable gain knob on the front which can be capped by means of a blind cover, XLR input
4-Channel Digital Power Amplifier
Class D, Built-in DSP, 4 XLR inputs, 4 Speaker twist outputs
1 Microphone / line input, 2 RCA (L/R) inputs, Master control, Tone control (Treble /bass), RCA (L/R) Aux output, 2 Stereo binding posts for...
DriveCore Power amplifier
With Class-D circuit, 24 dB Linkwitz-Riley crossover, Input Sensitivity 1.4 or 0.775 V, Large front display for easy operation, Black-Out mode...
2-Channel 100 V Power Amplifier
2x240W can be bridged with 1x480W, Adjustable bass and treble, Frequency range 35 - 22,000 Hz, Signal-to-noise ratio > 95 dB, Incl. 19" rack mounts
Lightweight 2-channel Class D amplifier, Integrated crossover, Integrated limiter, Mains, signal and limit LEDs
Professional power amplifier, 2x 1500 W at 4 ohm, 2x 1100 W at 8 ohm, 2x 1800 W at 2 ohm, 2 Ohm stable, Built-in limiter, Softstart, Fully...
Very quiet fan (temperature controlled), Detachable gain knobs on the front which can be sealed by means of blind covers, XLR inputs, Binding post...
DriveCore Power Amplifier
With Class D circuit, 24 dB Linkwitz Riley crossover, Input sensitivity 1.4 or 0.775 V, Big front display for easy handling, Black out mode...
Fully programmable 3-channel digital amplifier with convections cooling, Internal DSP, Fully parametric 4-band equaliser, RS232 Control, All main...
Lightweight 2-channel Class D Amplifier with DSP
2 Inputs RCA (L / R), Master control, Tone control (treble / bass), AUX Output RCA (L / R), 2x Touch-proof Euroblocks for speakers, EQ
XLR input and output, Short-circuit fuse, Overtemperature protection, Limiter, Amplifier class H
ELA Amp 240W/100V, 4 Ohm outlet, Two-stage fan, 24 V Emergency connector, XLR In/out, Ground lift
Short circuit protection, Limiter, Fan (not temperature controlled)
4-Channel Class D Installation Amplifier
2 x 120 W with 70 V / 100 V outputs, 2 x 150 / 90 W for 4 / 8 Ohm impedances, Euroblock inputs and outputs, Separate gain control for each channel,...
Limiter, XLR and 6.3 mm jack inputs, Speaker Twist & binding post outputs, Short-circuit protection
240 W @ 100 V, Program and priority line input, 24V Output, XLR/Jack combo input
For input channels 1 and 2 as well as 3 and 4 bridged use is possible via switch, Short circuit protection, Overheating protection, Limiter,...
4 Ohm outlet, Two-stage fan, 24 V Emergency connector, XLR In/out, Ground lift
Studio Power Amp
Linear power amplifier for studios, events and Hi-Fi applications, Convection-cooled for silent operation (no fan), Protection circuits for DC...
2-channel, 2 x 120 W / 100V, Very quiet temperature controlled fan, Gain potentiometer at the front, XLR inputs, 6-Year warranty
Mini Power Amplifier Module
For fixing directly to flat panel displays or in suspended ceilings, Input via mini jack, Output via phoenix terminal block, Power supply via...
Light 4-Channel Class D Power Amplifier
Built-in crossover, Integrated limiter, Mains, signal and limit LEDs
DSP controlled, Crossover with high and low pass, Each channel with 6/ 12/ 18/ 24 dB per octave and switchable polarity, Output EQ with 8...
Digital amplifier for top hat rail mounting
Ideal for small permanent installations in the POS, museums, Power supply from 12-24 Volt, Balanced and unbalanced inputs, Summing amplifier at...
2x 100 W at 4 ohms, 2x 65 W at 8 ohms, Balanced inputs with XLR and jack, Bridge mode possible, Speaker Twist and binding posts for speaker out,...
2-Channel Class-D Amplifier with DSP
For induction loops up to 400 sqm, Built-in compressor, Loops from 0.2 and 1.2 ohms, Balanced audio input
Dampening factor > 220 at 8 Ω, This amplifier has a speed controlled cooling fan with right to left air flow
Power Amplifier Module
For fixing to the back of small, passive speakers, Output via short cable with open cable ends for direct connection to the speaker terminals,...
Loop Induction Amplifier
For induction loops up to 700 sam, Built-in compressor, Loop fit of 0.3 O and 2.2 O ohms, Automatic check of the loop, Balanced audio input,...
Class D, 4 x 500 W @ 4 Ω, 4 x 250 W @ 8 Ω, Temperature controlled, Low rack installation depth (only 240 mm)
2 x 75 W at 4 ohms, 2 x 45 W at 8 ohms, Balanced inputs with XLR and jack, Bridgeable, Speaker Twist and terminal connections for speaker out, All...
4x 550 W/ 4 Ohm, 4x 350 W/ 8 Ohm, 2x 1000 W/ 8 Ohm (bridge mode), XLR inputs, Speaker twist outputs
Digital ELA 100V Amp for top hat rail mounting
Ideal for small fixed installations in the area of ELA, POS, museums, Power supply from 12-24 Volt, Balanced inputs, Summing amplifier at input,...
2 Gain controls, Switchable crossover, GuardRail, Detachable power cable, Dimensions (W x H x D) 483 x 89 x 257 mm
With Class-D circuit, 24 dB Linkwitz-Riley crossover, Input sensitivity 1.4 or 0,775 V, Large front display for easy operation, Black-Out mode...
2-Channel Analogic Power Amplifier
2x 450 Watt/4 Ohm, 2x 330 Watt/8 Ohm, 900 Watt/8 Ohm bridge mono, Signal to noise ratio > 100 dB, Damping factor > 200, XLR/RCA input, Speaker...
XLR input and output, Short-circuit fuse, Oertemperature protection, Limiter, Standby circuit
Bridge mode 1 x 4000 W at 4 ohm, 1 x 2800 W at 8 ohm
2-Channel Analogical Power Amplifier
2 x 750 W / 4 Ohm, 2 x 500 W / 8 Ohm, 1500 W / 8 Ohm Bridge Mono, Signal To Noise Ratio > 100 dB, Damping Factor > 200, XLR/RCA input, Speaker...
Live Performance DSP Amplifier
2 Ohm-stablity, Intuitive system control software for easy setup and control, Balanced XLR In / Out, Speaker twist connections
2 x 150 W at 4 ohms, 2 x 85 W at 8 ohms, Balanced inputs with XLR and jack, Bridgeable, Speaker Twist and binding post outputs for LS Out, All...
Short circuit protection, Limiter
2 Ohm-stable, Intuitive system control software for easy setup and control
Crossover with high- and low pass, Per channel with 6/12/18/24 dB per octave and switchable polarity, Output EQ with 8 parametric filters per...
2-Channel Analogue Power Amplifier
2x 1350 W/ 4 Ohm, 2x 1000 W/ 8 Ohm, 2700 W/ 8 Ohm bridge mono, Signal-to-noise ratio > 100 dB, Damping factor >200, XLR/ RCA connector input,...
Damping factor 300:1/ 1kHz/ 8 O, Short circuit protection, With limiter, Not temperature controlled
DSP-controlled, Crossover with high and lowpass per channel with 6/12/18/24 dB per octave and switchable polarity, Output EQ with 8 parametric...
Switched-mode Power Supply Power Amplifier
2x 910 W/ 4 ohm, 2x 590 W/ 8 ohm, 2x 1200 W/ 2 ohm, 1x 1800 W/ 8 ohm (bridge mode), 2400/ 4 Ohm (bridge mode), XLR Input and output, Speaker twist...
2-Channel Class D Amplifier with DSP
Built-in crossover, Integrated limiter, Mains, Signal and Limit LEDs
DSP controlled, Crossover with high and low pass filter per channel with 6/ 12/ 18/ 24 dB/ octave and switchable polarity, Output EQ with 8...
2-Channel Analog Power Amplifier
2 x 300 W at 4 ohms, 2 x 200 W at 8 ohms, 600 W at 8 ohms, bridge mono, Start-up delay, Short circuit protection, 19" / 2 RU
Digital Power Amplifier
2x 1200 W/ 4 Ohm, 2x 800 W/ 2 Ohm, 2x 600 W/ 8 Ohm, 2x 350 W/ 16 Ohm, 2 Channels, Integrated DSP with 40 parametric real-time EQs, High and low...
Conventional power supply unit, Balanced XLR In and Out, Class AB, Speaker Twist connectors, Ground lift, Protective circuits, Convection cooling,...