Accessories for Loudspeakers

Displaying 1-75 of 124 products

Adam Hall 019505 Speaker Front Foam 5mm

Front Foam

341

Permits free passage of air, Can be fixed with glue or other adhesive, May be used for speaker grill applying spray adhesive

Millenium Multi Monitormount MM1

Multi-Monitor Wall Mount

87

Universal monitor wall mount, Adjustable to any angle, The arm length of the holder is adjustable in stages

Adam Hall Permeable Foam 019512

Front Foam Board

214

Permits free passage of air, May be used for speaker grill applying spray adhesive

the box MBA120W Bodypack

Extension module for MBA 120 WConsists of:

4

1x Receiver module, 1x Body pack, 1x Headset, 1x Receiving antenna

Warnex Structure Paint Black 12kg

Structure paint

22

Fast drying 1K aqueous paint with very good surface hardness, Black, semi matte

Visaton Damping Material

Damping Material

92

Damping for loudspeakers, Made of hygienically harmless polyester wool, With excellent damping properties, Ready to be handled, Sufficient for a...

Adam Hall SM 720

Mounting Flange For Loudspeakers

57

M20 thread, Zinc die-cast flange

K&M Mic Stand Adapter JBL Control1

Stand Adapter

31

For mounting a JBL Control 1 or Control 1 Pro (not suitable for the JBL Control One hi-fi speakers), On microphone stand with 3/8" thread

Adam Hall 0715 Speaker Grille Tygan blk

Speaker Grille

48

Robust nylon, Tygan black, Price per running metre

LD Systems Dave 8 Set 2

Tripod set

32

For LD systems Dave 8 Roadie and Dave 8 XS (from SN 130818000001), Bag included

Adam Hall SM 700

35 mm Mounting Flange For Loudspeakers

55

Permits free passage of air, Can be fixed with glue or other adhesive, May be used for speaker grill applying spray adhesive

HK Audio Stereo Stand Add-On Nano 300 S

Tripod set

5

Suitable for Lucas Nano 300, 302, 305 FX, Consisting of 2x K & M tripods, 2x speaker cable, carrying bag and 8x cable clips, Cables and tripods...

Yamaha CUBDXR8 U-Bracket

U-Bracket

1

Suitable for DXR 8

the box MBA80W Bodypack

Body Pack

1

Bodypack including headset, Suitable for MBA 80W

LD Systems SUWMB 10 B

Speaker Wall Mount

9

For LD Systems SAT G2 series, Dave 8 XS and Roadie Satellites

Yamaha BMS10A

Stand Adapter

171

MS 20, S 15, MSP 3, MS 101 II, MS101 III, MS 203 II, MG 102 C, MG 82 CX, Stagepass 400i, Stagepass 600i, MG 06, 06x, 10, 10xu

the box pro 204 U-Bracket horizontal

U-bracket

11

For horizontal mounting of an agate 204 on the ceiling or horizontally / vertically on the wall, Black painted steel, A 3/8" screw is included,...

Gator Speaker Stand Bag

Tripod Bag for 2 Speaker Stands

207

From extra sturdy nylon

Yamaha SPW-1, DXS 18 Wheel-Kit

Castors for speakers

10

Suitable for Yamaha DXS 18/15/12, DXS18XLF(-D), DXS15XLF(-D) Sub, With washer plate per roll

RCF ART 310 H-BR Wall Mount

Horizontal Bracket

4

For Art 310, For horizontal mounting

HK Audio Speaker stand Add On Pack.

Speaker Stand Add-On Pack

62

Suitable for HK 2K15, HK 2K18, 2 Speaker cables, each 7 m in length, Black gigbag

Monacor MZF-8633

Protective Speaker Grilles

34

Classic shape with square perforation and rubber rim, Black lacquered, Can be fixed with clamps, High stability in all sizes, ø 465 mm (18")

Millenium Speaker Tilt Adapter STA1

Speaker Tilter

51

For all speakers with 36 mm flange

dB Technologies DVA Mini DSA-M2

Stand Adapter

1

Suitable for up to 2 DVA Mini

LD Systems Curv 500 SLA

Smartlink adapter for up to 4 Curv 500 satellites

4

SPK connection, 2 Threads M6, 2 Flanges 16 mm

Monacor MZF-8632

Speaker Grille 15"

42

Permits free passage of air, Can be fixed with glue or other adhesive, May be used for speaker grill applying spray adhesive

dB Technologies DO ES1203

Magnetic Transportation Dolly

1

Suitable for dB Technologies ES1203, Sticks to stairs and steps, 4 Rolls

LD Systems Curv 500 STS

Extension set for Curv 500 systems

3

Consists of SmartLink adapter, distance pole, speaker stand base and speaker cable

Adam Hall 3471 Handle

Extendable handle

81

With aluminium shaft, Plastic grip and mounting plates, Mounts from outside

Yamaha DL-SP1K

Rolling frame

0

Can be combined with a sleeve

Yamaha Stagepasmount

Stand Adapter

98

Suitable for Yamaha Stagepas, Price per unit, Set screw included, Mounting screws not included

Bose S1 Play Through Cover White

Box cover

0

Suitable for Bose S1, Acoustically transparent, stretchable fabric, High-quality zipper

Adam Hall 5922TP Speaker Clamp Pack

Mounting Clamp Set

81

Suitable for speaker sizes up to 12", 4 Clamps, 4 Screws, 4 Tee nuts, Blister pack

RCF EVOX 5/8 Trolley

Trolley

6

For EVOX 5 & EVOX 8 (can be used only with cover)

Apart ACPL

Wired remote control

1

For SDQ5PIR, Volume, On / Off, Line and microphone input

HK Audio Elements ep1 Mounting Pole

Spacer Rod for Elements System

20

Height adjustable via large locking screw, Height adjustable from 95 - 160 cm, Integrated E-Connect bus

HK Audio Lucas Nano 600Desk/Wall Mount

Desk / Wall Mount Add-on

7

Suitable for Lucas Nano 600 / 608i, Consists of 2x desk/wall mounts, Allows operation of Nano Tops on a horizontal surface or a wall mount

the box pro 204 U-Bracket vertical

U-bracket

7

For vertical mounting of an agate 204 on the ceiling or on a half coupler, Steel, painted black, Dimensions 126 x 200 x 50 mm

Monacor MZF-8631

Protective Speaker Grilles

76

Size 12", Classic shape with square perforation and rubber rim, Black lacquered, Can be fixed with clamps, High stability

the box pro Achat 804 Pole Mount

Stand Flange

19

Compatible with Achat 804

HK Audio Elements EF45

Base

10

Stable system base with a small footprint, Integrated E-Connect bus, 2x Parallel NL4 speaker twist connectors

Adam Hall 0175 Felt

Cover Felt

52

For loudspeakers, 2 mm thick, Price per meter

Yamaha CUBDXR12 U-Bracket

U-Bracket

3

Suitable for DXR 12

EV F200

Monitor feet

24

For SX200 / 300 (A), Set consisting of two feet suitable for one box

Syrincs M3-220 Extension Cable 5m

Connector Cable

30

Connection cable for M3-230 satellite system

BMS C 16-8

Crossover

3

Passive 2-way mono HP-TP 6.3 kHz crossover, For BMS 4590-8 Ohm and BMS 4592ND-8 drivers, 18 dB high pass, High frequency EQ, 12 dB low pass, Only...

HK Audio PP-CP Set

2 Pick-point and clustering plates

1

3 Attachment points for flying and angling the LTS, For single, headstack, cluster, headstack cluster modes

Adam Hall 3405 Bar Handle

Bar Handle for Edge Mounting

61

Powder coated

LD Systems Front Grille for DAVE8XS BK

Front panel

31

Suitable for the satellites of the DAVE8XS system

Apart CMBB

Surface or flush-mounted housing

1

White for CM6E / CM6T / CM20T / CM608

Monacor Speaker Foam MDM-35

Speaker sealing tape MDM-35

33

10 meters self-adhesive seal (2mm x 20mm), Deep black rubber foam, Highly flexible, Permanently elastic, As a support for speakers and metal front...

Behringer WB210 Wallmount Black

Wall Mount

7

Suitable for B210 / B210D

FBT Vertus VT-S 604

Stand Flange

6

CLA 604 A

JBL SK3 Soffitt Safety Relay Bulb

Festoon lamp

22

Overload protection, For JBL Control 1 and Control 5

Monacor AT-62SK

L-Controller

12

High performance level control for loudspeakers, Mono version with push-on button

Adam Hall SM 702

Mounting Flange For Loudspeaker Cabinets

52

Permits free passage of air, Can be fixed with glue or other adhesive, May be used for speaker grill applying spray adhesive

LD Systems Curv 500 SLA W

SmartLink adapter

0

For up to 4 Curv 500 satellites, SPK connection, 2x M6 thread, 2x 16 mm flange

Monacor Spikes SPS-10/SC

LS spike sets (4 pieces)

12

Slim design, With support and nuts, For acoustic decoupling of LS boxes from the stand area, 18mm Diameter

Adam Hall 019525 Front Foam

Front foam sheet

3

25 mm Thick, Breathable

ANT BBM-358Y

Wall or ceiling mounting kit

0

For ANT BBM 3/5/8, Swivelling

HK Audio Linear 5 Tilt Unit

Tilt unit

8

Suitable for HK Audio Linear 5

HK Audio Textured Paint 1Kg Grey

Structure Paint

28

Fast drying 1k aqueous paint with very good surface hardness

Line6 Short Pole

Short Distance Tube

7

Suitable for L3S, L3M and L3T, M20 thread

HK Audio TB-NQ

Tilt Bracket with Quick Release

0

Suitable for loudspeaker systems of the PULSAR series ( PL 112 FA, PL 115 FA) and LINEAR 5 (L5 112 F/FA, L5 115 F/FA, L5 LTS/LTS A), LINEAR 3 (112...

ESI Endstufenmodul for nEar05 MKII

Output stage module

1

For ESI nEar05 (MK II version), 2-Way power amplifier module with integrated crossover, 1 Jack and 1 XLR input

the box pro 204 WH U-Bracket horizontal

Horizontal U-bracket

2

U-bracket for horizontal mounting of an agate 204 on the ceiling or horizontally / vertically on the wall, A 3/8" screw is included, Multiple...

Monacor PL-2418 Soffits

Soffits

44

18W / 24V, 2 Pieces per pack, Optional HF protection for 25 W tweeters, e.g. JBL 2402 or similar

Artec Power Supply for PMD3-8

PSU for PMD3-8

11

15 V / 1 A, Positive inside

dB Technologies DVA DSA 4 Stand Adapter

Tripod adapterThe DSA-4 tripod adapter allows the mounting of up to three DVA T4 modules on a distance rod. The angle of inclination can be infinitely varied via an adjusting screw and precisely aligned. The set angle can be read laterally on a scale. In c

2

Permits free passage of air, Can be fixed with glue or other adhesive, May be used for speaker grill applying spray adhesive

EV Soffitt Lamp Sk3 Red Dot

Festoon

13

With red dot

the box pro Achat Stack Board 208

Adaptor

3

For safely stacking Achat 208 HL and HR on Agate 115SUB, Achat 118, The box TP118/800 and TP218/1600

JBL Control 1 Grill Black

Retainer for agate 108 CX and agate 108 CXA

1

Includes mounting material

Monacor MZF-8630

Speaker grille

24

Classic shape with square perforation and rubber border, Painted black, To be fastened by clamps, With high stability in all sizes, A 260 mm (10")

Adam Hall 0174 Felt dark grey

Felt Speaker Cover

27

For covering speakers, Thickness 2 mm, Price per running metre

Monacor MZF-8624

Protective Guard Mounting Bracket

7

Permits free passage of air, Can be fixed with glue or other adhesive, May be used for speaker grill applying spray adhesive