PA Speakers

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

1200 W Class D Amplifier, 3 Suspension points with M10 thread, QuickSmartDSP with Bluetooth, Signal Synchronized Transducer, Can be used as a floor...

See Details

With monitor tilt, 90° x 60°, SPK input and output, 35 mm stand flange, 2x M10 / 7x M8 flight points

See Details

Class D power amplifier with 200 W for LF, Class AB power amplifier 50 W for HF, Control panel with level, preset switch (FOH/Monitor) and GND...

See Details

3x M10 / 6x M6 rigging points

See Details

With monitor angle, 131 dB peak, SPK in- and output, 35 mm flange mount, 2 x M10 / 7 x M8 fly points, Weight 17.0 kg

See Details

With integrated ClassD digital power amplifier, Connector panel with 2 x XLR / jack combo input, 2x XLR Link out and 2 x XLR Line out, 4x 75 mm...

See Details

Digital controller (FIR filter), 2 XLR Inputs, 2 XLR Outputs, Max. sound pressure 126 dB / 130 dB peak (pink noise with 6 dB crest factor)

See Details

Class D Digipro G3 amplifier, 134 db SPL, 5 Switchable crossover frequencies 70 - 110 Hz, Control 28/56 bit DSP AD / D converter 24 bit / 48Hz,...

See Details

Active 12" subwoofer, Adjustable hi-cut filter, Corresponding protective cover available under ArticleNr 240354, Manufactured in Germany

See Details

Overload protection, For JBL Control 1 and Control 5

See Details

For defined voice and music production, Internal DSP, 2-Way active, 9x M10 fly points, 35 mm speaker flange, 2 Handles on the back, XLR in, XLR...

See Details

1200 W Class D Amplifier, 3 Suspension points with M10 thread, QuickSmartDSP with Bluetooth, Signal Synchronized Transducer, Plastic case

See Details

For the QSC KS 112, Slightly padded, Suitable for casters, Hook and loop fastener, Hook and loop fastener at the top for transporting compact amp...

See Details

With stereo crossover, GND-Lift, Link / X-Over and polarity switchable, 36 mm Pole mount, Wooden cabinet

See Details

Compact PA / Media System, Active bandpass subwoofer with 1x 8" speaker, Two 2 x 4" 1" d'Appolito satellites, 45-19000 Hz, 117 dB SPL max .,...

See Details

Active Mid/ High Speakers, Line source housing (Column), 200 W power, Black textured paint finish, Developed in Germany

See Details

5" Woofer, 1" Tweeter, 80W, 8 Ω, 110 dB max, Incl. back plate for horizontal mounting

See Details

1.25" Voice coil, Built in Concert, Princeton, Super, Super Rev., Vibrolux Rev. (since 1962)

See Details

High performance level control for loudspeakers, Mono version with push-on button

See Details

Dynacord AXM 12A

See Details

18 mm Press housing, Black felt cover

See Details

Class D power amplifier, DSP with 8 presets, 8 Delay steps from 0.25 - 3.5 m, Stereo input, Link output, M20 stand flange mount

See Details

100 V operation as well as 8 Ohm operation possible through integrated transformer, 4" Woofer, Plastic housing

See Details

Can also be used as a stage monitor, DSP with Plug and Play without complicated layered menus, Integrated control over functions such as EQ,...

See Details

Suitable cover for RCF NX 32 A

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

Also usable as a 40° monitor, 36 mm Pole mount, M8 rigging points, Speakon connections, Weatherproof housing

See Details

DSP with Plug and Play without complicated menu structures, Integrated control of functions such as EQ, X-Over, limiters, EQ presets (Flat /...

See Details

Active Full-range Speaker, Class D amplifier, Built-in DSP with Display, 2 Microphone / line XLR / jack combo inputs, XLR output, Polypropylene...

See Details

For ETX-12SP, Padded

See Details

Speaker Twist input and output, Plastic housing, Also usable as a monitor, Pole mount, 4 x M10 rigging points, 3 Handles

See Details

Passive Speaker, 8"/ 1" drivers, 200 / 800W at 8 ohms, 90° x 50° CD-horn, Speaker twist in/ out, Stand flange mount, Plastic housing (PP)

See Details

Ideal for today's sound engineering needs, High-performance 1,600 W Class-D amplifier module, 96 kHz DSP for true hi-resolution sound with...

See Details

5" Woofer + 1" silk dome tweeter, Stereo mini-jack and RCA inputs, 2 x 20 Watts, Includes wall bracket, 50 Hz - 20 kHz, Set Weigh:t 5.3 Kg

See Details

KlarkTeknik Class D amplifier, Built-in DSP, 2 jack / XLR inputs, XLR Output, Wireless remote control via Apple iPhone / iPad, Bluetooth

See Details

Active Full-Range Speaker, FIRPhase technology, 15" Woofer with 2.5" voice coil, 1" Compression driver with 1.75" voice coil, BiAmp digital power...

See Details

Passive 8" + 1" monitor/full range loudspeaker, BMS tweeter, Terminal with 1x Speaker Twist input and 1x Speaker Twist output, 12 mm Plywood...

See Details

Active 15" Subwoofer, Adjustable High Cut, Phase reverse switch, Developed in Germany, Developed in Germany

See Details

Ceramic Magnet 1.5 " vibration coil, Warm and dense tone with full and fat bass, The Falcon responds to distorted sounds with a multi-layered...

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

Equipped with a 15" woofer and 1.25" compression driver, Built-in DSP with display and FIR filtering, 2 XLR/Jack mic/line inputs, XLR output

See Details

With 3" neodymium driver and FirPhase technology, Class D Amplifier, Soft limiter function, 2 Handles, Tripod mount, 5x M10 threads, 4x Quick release

See Details

Digital power amplifier with 1200 W / 600 W RMS, 90° x 60° tweeter, DSP-controlled digital power amplifier, Peak SPL 131 dB, With FRFR - full...

See Details

2-Way 10" neodymium woofer, 1" ND Compression driver, FIR, Delay, XLR Input and thru, 35 mm Tripod flange mount

See Details

Particularly suitable for operation with the box per TL 63 medium - high-frequency system (Art.452285 - not included), Built-in limiter, Pole mount...

See Details

Active Complete PA, Via iPad remote controlled compact PA, 1x Active 10" subwoofer with 2x 4.5" satellites, 4 Combined XLR/ jack inputs, 2x Jack...

See Details

150 watts, Legendary 15 " guitar speaker, Ideal for blues with ST or single cut guitar

See Details

1500 Watt digital Class D Bi-Amp module (2 x 750 W), DSP with function control via built-in Wi-Fi, Double pole mount, 12x M10 Rigging points

See Details

2-Way Active PA Speakers, Class D amplifier module without fan, 55° monitor inclination, 6 EQ presets, High-performance DSP corrects nonlinear...

See Details

With stereo crossover, GND-Lift, Link / X-Over and Polarity switchable, Frequency range 42 - 120 Hz, 36 mm stand flange, Wooden cabinet

See Details

Active bandpass, 18" B&C neodymium speaker with 3" coil, 900 W RMS, Max. 133 dB SPL, Integrated 900 W RMS PWM amplifier, Stand flange, Signal...

See Details

the box pro TL Pole, the box pro TL 110, the box pro TL 63, the sssnake SLL21502

See Details

For high-quality voice and music playback, Internal switch with low inductance, Bass reflex tuning at 65 Hz, Self-extinguishing plastic housing,...

See Details

100 V version, Equipped with 2 x 4" + Tweeter, Wall mount included, Price for pair

See Details

100/ 70V - 110/ 55 / ​​28/ 14W, 110° x 70°, Shielding, Incl. bracket

See Details

For up to 4 Curv 500 satellites, SPK connection, 2x M6 thread, 2x 16 mm flange

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

Bass reflex housing, Class-D amplifier with DSP controller, 24-Bit / 96 kHz AD / DA converter, XLR input and output, Power Twist input and output,...

See Details

Active subwoofer, Adjustable low-pass filter from 40 - 150 Hz, XLR (L + R) Throu, Ground lift shape and phase switch, 36 mm Pole-mount flange, Felt...

See Details

Active Subwoofer, Bass reflex/ horn hybrid body, Digital amplifier with 1400 W peak/ 700 W RMS, 56 Bit DSP for X-over, Limiter, Delay, EQ, Delay up...

See Details

Alnico Vintage Series, Used in Tweed Twin, Without bell

See Details

Ceramic magnet, 1.5" Voice coil

See Details

Slim design, With support and nuts, For acoustic decoupling of LS boxes from the stand area, 18mm Diameter

See Details

25 mm Thick, Breathable

See Details

For ANT BBM 3/5/8, Swivelling

See Details

Class D amplifier, Bi-Amp, Mic / Line XLR female input, XLR male output, 36 mm speaker flange

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

Suitable for the Alto TX208, Padded, Made from high-quality nylon, "Slip-On"-Design, Includes strap

See Details

For installation and stage applications, Terminal block and speaker twist connection, 15 mm MDF housing, 4x M8, 4x M6 and 2x M10 fly points, Weight...

See Details

18" Woofer, 400 Watt Class D power amplifier, M20 Thread

See Details

Waveguide rotatable, Passive crossover with overvoltage protection, Built-in transformer for ELA applications (25/50 / 100W, 100V)

See Details

With transformer, For high-quality voice and music playback, Internal switch with low inductance, Bass reflex tuning at 150 Hz, Self-extinguishing...

See Details

Consists of 1x CB12 and 2x CX8, Class AB output stage, Built-in DSP with FIR filter, Top unit CX8 with monitor slope, M20 thread, 36 mm box flange...

See Details

16 Ohms

See Details