Mixing Desk Cases

Suitable for all mixers from the X-Air Series, 10 mm foam padding, Handles and shoulder strap, Also suitable for Behringer SD8 and SD16 Stagebox

See Details

Made-to-measure flight case for Behringer X32 Compact, Made from 7 mm birch plywood, 30 x 30 mm aluminium edges, Foam padding, 4 Medium sprung...

See Details

Custom-made for Behringer X-32, Made of 10 mm birch plywood, 30 x 30 mm aluminium edge, Foam padding, 4 Butterfly latches, Steel ball corners, 12...

See Details

Live transport case with padding for Midas M 32R, 7 mm birch plywood, 30 x 30 mm aluminium edges, Foam padding, 4 Medium sprung butterfly latches,...

See Details

Made from 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 4 Medium sprung butterfly latches, Steel ball corners, 12 cm Cable conduit...

See Details

Made-to-measure flight case for Yamaha MG16 and MG20 XU, Made from 7 mm birch plywood, 22 x 22 mm aluminium edges, Foam padding, 2 Drawbolts, 2...

See Details

For Allen & Heath SQ5, 30 x 30 mm aluminium edge, Foam padding, 4 Spring-loaded butterfly latches, 4 Folding handles, 4 Steel ball corners, 4 Steel...

See Details

Made-to-measure transport case for Midas M-32 Console, Made from 7 mm birch plywood, 30 x 30 mm aluminium edges, Foam padding, 4 Medium sprung...

See Details

For the Soundcraft Signature 22 and 22 MTK, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2 x Medium sprung butterfly catches,...

See Details

For the Allen & Heath Qu-16, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 3x Folding handles, 4x Medium spring-loaded...

See Details

For Allen & Heath SQ6, With dockhouse, 30 x 30mm aluminium edges, 4 Butterfly latches, 6 Folding handles, 8 Steel ball corners, 4 Swivel castors (2...

See Details

For the Behringer X32 Producer, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2 x Spring-loaded butterfly latches, 3 x Folding...

See Details

Customized for Soundcraft SI Impact, 30 x 30 mm aluminum edges, 4 Medium butterfly locks, 6 Hinged handles, Steel ball corners, 15 cm cable...

See Details

For Soundcraft Signature 12, 25 x 25 mm aluminium profile, 2 Butterfly latches, 1 Leather handle, Steel ball corners, Custom-made foam padding in...

See Details

Custom-made mixer case for the Allen & Heath Qu-24, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 4x Medium sprung butterfly...

See Details

Custom-made flight case for the Yamaha MG12 XU, From 7 mm birch plywood, 22 x 22 mm Aluminium edges, Foam padding, 2x Drawbolts, 2x Hook over...

See Details

For Allen & Heath SQ6, 30 x 30mm Aluminium edge, Foam padding, 4 Spring loaded butterfly fasteners, 4 Folding handles, 4 Steel ball corners, 4...

See Details

For Soundcraft Signature 16 and 16 MTK, Made from 7mm birch plywood, 30 x 30 mm aluminium edges, Foam padding, 2 Medium sprung butterfly latches, 1...

See Details

Suitable for Yamaha TF-1, Phenolic resin laminate, 30 x 30 mm aluminum edges, 4 Medium butterfly locks, 6 Hinged handles, 2 Sliding rails, Steel...

See Details

Made-to-measure mixer case for Yamaha QL1, Made from 9mm birch plywood, 30 x 30 mm aluminium edges, Minimum 20 mm foam padding, 4 Medium sprung...

See Details

Suitable for Behringer x-Touch, With pull out notebook shelf, 7 mm birch plywood, phenolic resin coated, 25 x 25 mm aluminium edges, Foam padding...

See Details

For Behringer PMP 4000 / PMP 3000, Made from 7 mm birch plywood, 25 x 25 mm aluminium edges, 2 Sprung butterfly latches with stop, 1 Strap handle...

See Details

Suitable for the Midas M32 and M32 Live Mixer, 6 x Folding handle, 4 x Butterfly latches, Aluminium edges, 8 x Ball corners

See Details

Custom-made flight case for Mackie Pro FX-16V2, Made of 7 mm birch plywood, coated with phenolic resin, 30 x 30 mm aluminium edges, Foam padding, 2...

See Details

Suitable for Behringer X Air XR18, Made from 7 mm birch plywood, Coated with phenolic resin, 2 Small butterfly latches, 1 Strap handle, 8 Rounded...

See Details

For the t.mix 24.12, 30/30 aluminium edges, 4 butterfly latches, 3 folding handles, 4 ball corners, 4 ball corners with L-corner, Foam padding, 12...

See Details

Made-to-measure transport case for Yamaha QL1, Made of 9 mm birch plywood, 30 x 30 mm aluminium edges, Minimum 20 mm foam padding, 4 Folding...

See Details

Made-to-measure transport case for Yamaha MGP32X, 7 mm birch plywood, 30 x 30 mm aluminium edges, 6 Folding handles, 4 Medium sprung butterfly...

See Details

Custom-made mixer case for the Yamaha QL5, From 9 mm black coated birch plywood, 30 x 30 mm Aluminium edges, At least 20 mm of foam padding, 4x...

See Details

For Soundcraft Signature 10, 25 x 25 mm aluminium profile, 2 Butterfly latches, 1 Leather handle, Steel ball corners, Custom-made foam padding in...

See Details

Custom-made professional flight case for Midas M-32, Black 9 mm birch plywood, Min. 2 cm foam padding, 30 x 30 mm Aluminium edges, 4 Spring loaded...

See Details

Custom-made for the Yamaha MGP24X, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2x Sprung butterfly catches, 6x Folding...

See Details

Custom-made flight case for the Behringer X-32 Compact, Made from 10 mm birch plywood, Black coated, Foam padding, 4 Butterfly latches, Steel ball...

See Details

For Behringer PMH/PMP 5000 and PMP 6000, 30 x 30 mm Aluminium edges, 4 Spring-loaded butterfly latches with stopper, 1 Belt handle with steel core,...

See Details

For Behringer X Air X18, 22 x 22 mm Aluminium edge profile, 2 Butterfly latches, 1 Leather handle, Steel ball corners, Custom fitted foam padding...

See Details

Foam padding, With carry straps

See Details

Suitable for Behringer X32 Compact, X32 Producer or a mixer of similar size, Robust nylon bag, Angled design, Large outside pocket with partitions,...

See Details

For Allen & Heath SQ7, Dockhouse, 30 x 30 mm Aluminium edge, 4 Spring loaded butterfly latches, 6 Folding handles, 4 Steel ball corners, 4 Steel...

See Details

Made for Allen & Heath ZED-24 and ZED-22FX, Minimum 10 mm foam padding, 30 x 30 mm aluminum edges, 4 x Spring loaded butterfly latches (medium), 3...

See Details

For Allen & Heath QU 16

See Details

Made from 9 mm birch plywood, 4 Large butterfly latches, 8 Large folding handles, 12 Large L-corners, 2 Built-in edge handles, 8 Large ball...

See Details

For Presonus-Studiolive-AR 16 USB, 30 x 30 mm Aluminium edges, 2 Butterfly latches, High quality synthetic leather handle, Steel ball corners, Foam...

See Details

For Allen & Heath Wizard series, 25 x 25 mm Aluminium profile, 4 Rubber feet, 4 Spring loaded butterfly latches, 3 Folding handles, Fastening...

See Details

Für Presonus Studiolive 16.0.2, Standard version, At least 15 mm foam padding, 30 x 30 mm aluminum edges, Medium steel ball corners, 4 Sprung...

See Details

for Allen & Heath ZED-16FX / ZED-18, 30 x 30 mm aluminium edges, 1 Steel strap handle, 4 Spring loaded medium butterfly latches, Steel ball...

See Details

For Allen & Heath ZED-14 und ZED-12FX, 25 x 25 mm aluminium edges, 1 Steel strip handle, 4 Sprung butterfly latches, Steel ball corners, At least 1...

See Details

For Yamaha MGP16X, Made of 7 mm birch plywood, 30 x 30 mm aluminium edges, 1 cm foam padding, 3 Folding handles, 4 Medium sprung butterfly latches,...

See Details

Suitable for the Presonus StudioLive 32s and Presonus StudioLive 64S, Made from 6.5 mm birch plywood, Coated in brown phenolic resin, 4 x Butterfly...

See Details

Made from 7 mm birch plywood, 325 x 25 mm aluminium edges, Foam padding, 2 Medium sprung butterfly latches, 1 Suitcase handle, Steel ball corners,...

See Details

Made from 9 mm birch plywood coated black, 35 x 35 x 3 mm aluminum edge with thomann Nietrille, Minimum 20 mm foam padding, 4 x Large spring loaded...

See Details

For Presonus Studio Live 32 Series III, 30 x 30 mm Aluminium edges, 4 Butterfly latches, 6 Folding handles, Steel ball corners, 2 Skid strips, 13...

See Details

Suitable for all mixers from the X-Air Series, 10 mm foam padding, Handles and shoulder strap, Also suitable for Behringer SD8 and SD16 Stagebox

See Details

Made for YAMAHA EMX 5014C and YAMAHA EMX 5016CF Power Mixers, Made from 7 mm birch plywood, 25 x 25 mm aluminum edges, Rounded corners medium, 2 x...

See Details

For Presonus Studio Live 16 Series III, 30 x 30 mm aluminium edges, 4 Butterfly locks, 4 Folding handles, Steel ball corners, 2 Skid strips, 13 cm...

See Details

Custom made for Behringer SL2442FX-Pro Eurodesk and SX 2442 FX, 30 x 30 mm aluminum edges, 1 x Faux leather handle, 2 x Spring loaded butterfly...

See Details

Suitable for powermate 1600-3, Suitably constructed for the mixer without lid, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 1 cm Foam padding, 4...

See Details

Suitable for the Presonus StudioLive 32SC, Made from 6.5 mm birch plywood, Coated in brown phenolic resin, 4 x Butterfly latches, medium, 4 x...

See Details

Mixer case for the Alto Live 1604, Made from 6.5 mm birch plywood, 25 x 25 mm Aluminium edges, Medium ball corners, 2 x Butterfly latches, 1 x...

See Details

Made to measure mixer case for A&H ZED60-10FX, Made of 7 mm birch plywood, 25 x 25 mm aluminium edges, Foam padding, 2 spring loaded butterfly...

See Details

Suitable for t.mix DM 20, 25 x 25 mm Aluminium edges, foam padding, 2 Spring loaded medium butterfly latches, Leather handle, Steel ball corners,...

See Details

Suitable for Dynacord Powermate 600-3

See Details

Yamaha TF-5, Phenolic resin laminate, 30 x 30 mm aluminum edges, 4 Medium butterfly locks, 6 Hinged handles, 2 Sliding rails, Steel ball corners,...

See Details

Suitable for mixing consoles and equipment, 10 mm foam padding, Handles and shoulder straps, External storage pockets with zipper

See Details

Made to measure mixer case for A&H ZED60-14FX, Made of 7 mm birch plywood, 25 x 25 mm aluminium edges, Foam padding, 2 spring loaded Butterfly...

See Details

For Allen & Heath SQ7, 30 x 30 mm Aluminium edge, Foam padding, 4 Spring-loaded butterfly closures, 6 Folding handles, 4 Steel ball corners, 4...

See Details

Custom made flight case for Behringer xenyx QX-1832 USB, From 7 mm birch plywood, 25 x 25 mm Aluminium edges, Foam padding, 2 Spring loaded...

See Details

Nylon bag foam padded with carrying strap

See Details

Suitable for Yamaha TF-3, Phenolic resin laminate, 30 x 30 mm aluminum edges, 4 Medium butterfly locks, 6 Hinged handles, 2 Sliding rails, Steel...

See Details

Yamaha MGP12X, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Min. 1 cm foam padding, With 4 spring loaded medium butterfly latches, 1...

See Details

For Behringer X-Touch Compact, 25 x 25 mm Aluminium edge profile, Device can be operated in case, 2 Butterfly latches, 1 Suitcase handle, Steel...

See Details

Custom made for Behringer SL3242FX-Pro Eurodesk SX3242FX, 7 mm birch plywood, 30 x 30 mm aluminum edges, 1 Faux leather handle, 2 x Spring loaded...

See Details

From 7 mm birch plywood, 30 x 30 mm Aluminium edges, At least 15 cm of foam padding, 4x Medium sprung butterfly catches, 6x Folding handles, Steel...

See Details

Suitable for Behringer X32 Compact and other mixing consoles of a similar size, "EVA" foam padding, Space for cable laying, Extendable rubberized...

See Details

Custom made flight case for Dynacord powermate 600-3 (without lid), From 7 mm birch plywood, 25 x 25 mm Aluminium edges, Foam padding, 2 Spring...

See Details

For Yamaha MG12 C and Yamaha MG124 CX, Made from 7 mm birch plywood, 22 x 22 mm aluminum edges, With 2 mounted draw bolts, 1 Suitcase handle, Small...

See Details