Displaying 601-675 of 1117 products
Precision Mask
High quality masking tape for flat and sharp edges of paint an varnish, Suitable for application for up to 6 months indoors and up to 8 weeks outdoors
Tilt bracket Expansion Set
Linear5 LTS Head Stack Extension Set, Extension to TB-N / TB-NQ for L5 LTS Head stack applications, Price per pairs
19" Standard Case
Made of 7 mm birch plywood, 2x Lids, 4x Spring-loaded butterfly latches (medium), 4x Folding handles, 25 x 25 mm aluminium profile edges,...
Active DI box
Line isolation box or pickup amplifier, Unbalanced and balanced signal routing, Balanced outputs with 2 x XLR jack (front and rear), 20 dB pad for...
Mixer Case
Custom made for Behringer SL2442FX-Pro Eurodesk and SX 2442 FX, 30 x 30 mm aluminum edges, 1 x Faux leather handle, 2 x Spring loaded butterfly...
Mixer Case
Suitable for powermate 1600-3, Suitably constructed for the mixer without lid, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 1 cm Foam padding, 4...
Mixer Bag
Strong water-resistant RokTex material, 20 mm Padding, Padded carrying straps, Large external compartment, Detachable shoulder strap
Fabric Tape
For sticking together and bundling cables, For coloured marking as well as for fixing carpet edges in trade fair construction, Especially for...
Varta SR 626 SW
Button cell suitable for the t.bone CM 400 camera microphone, 1.55 V, 27 mAh, Height 2.6 mm
Flight framework for DVA line array modules
Metal frame, S08, S09DP, S10DP, S20DP, S2585N, S1518N, S1521N, S30N, DVA, K5, KS 10
Passive Stereo Direct Box with USB
High resolution 24bit / 96kHz interface, 2x balanced, low-impedance XLR outputs with ground lift, Output level control with mono switch, Headphone...
Mixer Case
Suitable for the Presonus StudioLive 32SC, Made from 6.5 mm birch plywood, Coated in brown phenolic resin, 4 x Butterfly latches, medium, 4 x...
Fabric Tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Economy Wood Rack
6 U working height, 40 cm Built-in depth, Stepless rack rail, 22 x 22 mm and 25 x 25 mm aluminium profile, 2 lids, 2 folding handles, 4 snap locks,...
DI Box for Guitar and Bass Amplifiers
Connected between amp and speaker with the jack cable, Switchable Gnd-Lift, Switchable polarity 180°, Switchable bass extension for more low end...
Fabric Tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Battery Pack
For SK 250, SK 3063 and SK50, Battery status indicator (LCD), Precharged
Line summer/merger, isolated signal combiner
Maximum sound level for THD, Aluminium diecast housing made of HF-shielding alloy, Dimensions approx. 110 x 125 x 38 mm, 5 Year manufacturer warranty
Fabric Tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Aluminium strip
Pure aluminium foil, Coated on one side with a very strong, flame-retardant acrylic adhesive, Does not rust and shrink, Does not expand and is not...
19" Double Door Rack
Infinitely adjustable (no fixed increments or steps) rail at the front and rear, Robust aluminium profile, Ball corners, 2 x Folding handles, 4 x...
Passive Direct Box
Jack in, Jack thru, XLR out, Switchable -30 dB pad, Switchable gnd lift, Robust metal housing
Twisted DI Box Direct Injection Box
Converts a balanced signal into an unbalanced signal, Single channel, XLR female in, Jack out, Switchable GND lift, Max Input Level 6 dBu, Max....
Mixer Bag
Suitable for products such as the Behringer UB1832/MX2004, Mackie DFX12, Yamaha MG 12-4, 16-4, 16-6, 20 mm Padding, Two 20 mm wide hook-and-loop...
Fabric Tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Double Door Rack
5 U usable height, 35 cm Installation depth, Light construction, DD version, Drawbolts, 25 x 25 mm Aluminium edges, Continuous rack rail (no fixed...
Flight Case
Mixer case for the Alto Live 1604, Made from 6.5 mm birch plywood, 25 x 25 mm Aluminium edges, Medium ball corners, 2 x Butterfly latches, 1 x...
Adhesive tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Battery Pack
For Sennheiser SK250, SK3063, SK50, Battery status indicator (LCD), Pre-charged
19" Standard Case
From 7 mm birch plywood, 4 Different heights, 2 Lids, 4 Medium sprung butterfly latches, 2 Folding handles, 25/25 mm aluminium frame, Infinitely...
19" Double Door Rack
6U Effective height, 40 cm Installation depth, Stable aluminium profiles, Corners, 2 Folding handles, 4 Spring-loaded butterfly closures, Stepless...
Phono Preamp
With RIAA equalization, Incl. DI box function, Power via 48V phantom or power supply
Mixer case
Made to measure mixer case for A&H ZED60-10FX, Made of 7 mm birch plywood, 25 x 25 mm aluminium edges, Foam padding, 2 spring loaded butterfly...
Precision Mask
High quality masking tape for flat and sharp edges of paint and varnish, Suitable for application for up to 6 months indoors and up to 8 weeks...
19" Amp Rack
Suitable for power amplifiers with higher installation depth, 2 U Installation height, 45 cm Usable depth, 25 x 25mm Aluminium frame profile, 2x...
Angled Rack with Service Flap
Split lid for front and top, 4 Butterfly latches, 2 Folding handles, 8 Ball corners, Completely removable service flap with snap lock
Passive Stereo Direct Box
Suitable for stereo sources such as keyboards and media players, High-impedance 1/4" inputs with thru outputs and 15db pads, Balanced XLR outputs...
Soft PVC Insulating Tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Passive DI Box
With stereo input/summed mono output, Midas transformer, Separate level controls for both channels, Ground lift, Neutrik XLR output (mono summed),...
Speaker Bag
With integrated rollers, For the Line6 L2T and L2M, Padded, Black
Fabric Tape
For sticking together and bundling cables, For coloured marking as well as for fixing carpet edges in trade fair construction, Especially for...
Warning tape
PVC adhesive tape with an anti-slip, abrasion-resistant aluminium oxide abrasive grit, Coated with heat-resistant long-term acrylic adhesive,...
Standard Cloth Tape
For craft and stage applications, 55 mesh PET / rayon fabric with natural rubber adhesive, 55 Mesh, Silver
19 "plastic rack
2 Butterfly caps, Two handles, Black hard plastic housing, Rack rails with front and rear screw threads, Incl. Screw set
Direct Input Box
Jack input, Parallel output, Output impedance balanced, Impedance and signal matching for the direct connection of instruments to amplifiers and...
Custom-made Mixercase
Suitable for t.mix DM 20, 25 x 25 mm Aluminium edges, foam padding, 2 Spring loaded medium butterfly latches, Leather handle, Steel ball corners,...
Protective Cover
For Maui 44 Subwoofer, Recesses for the carrying handles of the subwoofer, Retractable strap for the column bags (Article number 348760 - not...
Universal PVC Packaging Tape
Can be used on all standard manual dispensers, Rolls evenly and quietly
Rack Case
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
1U Module Rack
19" Format, 45 cm Usable depth, Made from 15 mm doweled and glued together birch, Cable feed at the back, Flat rubber feet on the bottom, Stackable...
Mixer Case
Yamaha TF-5, Phenolic resin laminate, 30 x 30 mm aluminum edges, 4 Medium butterfly locks, 6 Hinged handles, 2 Sliding rails, Steel ball corners,...
Carrying Bag
Suitable for mixing consoles and equipment, 10 mm foam padding, Handles and shoulder straps, External storage pockets with zipper
Soft PVC insulating tape
Very light construction, 19" rack mounts in front and back, Heavy duty butterfly latches, Suitable spare screws available under Art.449210 (not...
Array Kit
For EUROCOM CL speakers, Robust steel construction, Includes hardware for installation
19" Rack with Castors
8 RU usable height, 45 cm installation depth (suitable for power amplifiers with high installation depth), 25 x 25 mm aluminium profile edges,...
Speaker Emulator
Shapes the sound as dynamically as a speaker, In combination with a distortion pedal or preamp, the Iconoclast delivers a consistent amp sound for...
Truss adaptor
For DRK-IG for extended flight assembly of all INGENIA models on a truss or a theatre train
Water-Resistant 13" 4U Fly Rack
MIL-STD-C-4150j, Injection-molded housing, Made of polypropylene copolymer resin, Removable rack frame, Molded hinge, Patented trigger unlocking...
DI box
Speaker simulation, Ground lift switch, Balanced and unbalanced outputs (XLR / jack), 0/-20/+20 dB switch, Status LED, Requires 9V DC power supply...
Mixer case
Made to measure mixer case for A&H ZED60-14FX, Made of 7 mm birch plywood, 25 x 25 mm aluminium edges, Foam padding, 2 spring loaded Butterfly...
Active DI Box
Specially for piezo users of orchestral instruments, Smooths out peaks, 48 V Phantom power, Handle in, Jack out, XLR out, Switchable HPF,...
Thon Case
For Allen & Heath SQ7, 30 x 30 mm Aluminium edge, Foam padding, 4 Spring-loaded butterfly closures, 6 Folding handles, 4 Steel ball corners, 4...
Active DI-Box
Power supply via 9V block or 48V phantom, 30 db pad switch, Gnd-lift switch
Triple door live rack 12U with wheels
Detachable top, front and back, Continuous rack-rail with rubber inserts in the front and back, 12U, Continuous rack-rail with rubber inserts in...
Passive DI Box
Suitable for keyboard, A / E guitar, bass, etc., PAD switch (- 20 / -40 dB), Ground-lift switch