PA Accessories

Ideal for gluing dance floors

See Details

Quality Mignon batteries, Rechargeable

See Details

For quickly recharging a maximum of 16 mignon/AA or micro/AAA batteries, Steel housing, Quick battery recharging time of 2 - 4 hours, DeltaU charge...

See Details

With red, white and UV LEDs, Due to the additional 365 nm UV LED, this gooseneck lamp is ideal for identifying watermarks, for example on...

See Details

8 U of usable height, 50 cm installation depth - suitable for power amplifiers with high installation depth (e.g. the t.amp TA series), 25 x 25 mm...

See Details

for Allen & Heath ZED-16FX / ZED-18, 30 x 30 mm aluminium edges, 1 Steel strap handle, 4 Spring loaded medium butterfly latches, Steel ball...

See Details

In die-cast aluminium housing, Jack inputs and outputs, Ideal for clearing interference from stereo signals, 5-Year manufacturer's warranty

See Details

Can be used on all standard manual dispensers, Unrolls quietly, High UV, ageing and temperature resistance for a longer storage life

See Details

Can also be used for charging smartphones and other USB devices, 3 High-capacity lithium-ion batteries, Rechargeable while in use, On/Off switch, 2...

See Details

Made from 7 mm birch plywood, 2 U installation height, 2x Lids, 4x Small, spring loaded butterfly latches, 2x Folding handles, 25/25 mm Aluminium...

See Details

For Allen & Heath ZED-14 und ZED-12FX, 25 x 25 mm aluminium edges, 1 Steel strip handle, 4 Sprung butterfly latches, Steel ball corners, At least 1...

See Details

Powered by battery or phantom power, Latch input, XLR output, Output with ground lift switch, PAD -20 / -40 dB switch, Galvanic isolation

See Details

PE-coated fabric tape, Matte surface, Easily adapts to difficult shapes, Good abrasion resistance, Non-corrosive glue, High instant adhesion,...

See Details

For ALC 161 MKII chargers, For 4x 1.5 V mignon/AA batteries (not included)

See Details

Can also be used for charging smartphones and other USB devices, 3 High-capacity lithium-ion batteries, Rechargeable while in use, On/Off switch, 2...

See Details

Rotating right-angled 4-pin XLR connector

See Details

For Yamaha MGP16X, Made of 7 mm birch plywood, 30 x 30 mm aluminium edges, 1 cm foam padding, 3 Folding handles, 4 Medium sprung butterfly latches,...

See Details

Suitable for the Presonus StudioLive 32s and Presonus StudioLive 64S, Made from 6.5 mm birch plywood, Coated in brown phenolic resin, 4 x Butterfly...

See Details

With Rupert Neve Custom Transmitter, Input headroom of +21.5 dBU, Power supply via 48 V phantom power, Ground lift switch per channel, Instrument...

See Details

For sticking together and bundling cables, For coloured marking as well as for fixing carpet edges in trade fair construction, Especially for...

See Details

With red, white and UV LEDs, Due to the additional 365 nm UV LED, this gooseneck lamp is ideal for identifying watermarks, for example on...

See Details

Padded, With zipper in the front and back, Padded handles, Large outer pocket, Installation depth 14" (35.5 cm), Fitting replacement screws...

See Details

Made from 7 mm birch plywood, 325 x 25 mm aluminium edges, Foam padding, 2 Medium sprung butterfly latches, 1 Suitcase handle, Steel ball corners,...

See Details

In red, 50 mm x 50 meters, Especially for taping without adhesive residues

See Details

Powerpack with 7800 mAh, Blue LC-display as charge and discharge indicator, Can charge two devices at the same time, This power bank, fully...

See Details

The LED-3 allows the user to adjust the colour temperature to the desired requirements and conditions, The rotary switch at the base of the lamp...

See Details

From 7 mm double layered plastic, 3 U, DD Version, Draw bolts, 23 cm of usable depth, Case handle, 25/25 mm Infinitely adjustable rail (no fixed...

See Details

8 Butterfly latches, 2 Handles, Black hard plastic housing

See Details

With a speaker emulation developed by Juergen Rath 4x 12", Jack input, Direct link out, XLR out, Galvanic isolation, -20/ 40dB PAD (up to 3000 W),...

See Details

Pure aluminium foil, Coated on one side with a very strong, flame-retardant acrylic adhesive, Does not rust and shrink, Does not expand and is not...

See Details

Dimensions 10.1 x 10.1 x 27.5 mm

See Details

For the old version of Tour X series until 10/2009, 3/8" Thread

See Details

With castors, Made of 7mm birch plywood, 25 x 25 mm aluminium edges, 4 Folding handles, 5 Sprung medium butterfly latches, 2 Lid stays, Medium...

See Details

Made from 9 mm birch plywood coated black, 35 x 35 x 3 mm aluminum edge with thomann Nietrille, Minimum 20 mm foam padding, 4 x Large spring loaded...

See Details

DATI (dual audio transformer / isolater), 2 Channels

See Details

18 Mesh PET fabric with synthetic rubber adhesive, High adhesive strength on different materials, Tearable, Easy to roll off, Silver

See Details

For 10 LA

See Details

Size M6 x 30 mm

See Details

27.18 cm Installation depth, 4 Butterfly latches

See Details

Professional 19" amp-rack made of 9 mm black coated birch plywood, 50 cm depth, Rack-rail front and back, including attachment material, Every...

See Details

For Presonus Studio Live 32 Series III, 30 x 30 mm Aluminium edges, 4 Butterfly latches, 6 Folding handles, Steel ball corners, 2 Skid strips, 13...

See Details

Cast aluminum housing, Jack input and output, Ideal for dejamming of guitar racks, 5 year manufacturer's warranty

See Details

Passive, 1-Channel, PAD switch (0dB / -30dB), Input Link as a jack, Merge function to convert 2 mono-signals to a balanced signal, Balanced XLR...

See Details

Padded, With zipper in the front and back, Padded handles, Large outer pocket, Installation depth 14" (35.5 cm), Fitting replacement screws...

See Details

For ALAN 777, 3.7 Volt, 650 mAh

See Details

Padded, With zipper in the front and back, Padded handles, Large outer pocket, Installation depth 14" (35.5 cm), Fitting replacement screws...

See Details

Padded, With zipper in the front and back, Padded handles, Large outer pocket, Installation depth 14" (35.5 cm), Fitting replacement screws...

See Details

2-Channel isolation transformer, Diecast aluminium housing, RCA inputs and outputs, Ideal for suppressing hum loops in hi-fi racks or eliminating...

See Details

Tear-resistant nylon weave, Water-resistant, Padded handles and an adjustable shoulder strap, Feet made from synthetic material protect the...

See Details

Padded, With zipper in the front and back, Padded handles, Large outer pocket, Installation depth 14" (35.5 cm), Fitting replacement screws...

See Details

3V / 148 mAh

See Details

10 U, Rack rails on front and back sides, Butterfly latches, Black plastic housing, 4 Swivel casters (2 with brake)

See Details

2 RU effective height, 40 cm installation depth, Continuous rack rail with rubber inserts, 2x Lids, 25 x 25 mm aluminium profile edges, 4 Butterfly...

See Details

Rack rails located at the front and back, Rubber feet, Ball corners

See Details

Made for YAMAHA EMX 5014C and YAMAHA EMX 5016CF Power Mixers, Made from 7 mm birch plywood, 25 x 25 mm aluminum edges, Rounded corners medium, 2 x...

See Details

Converts 2x unbalanced RCA in 1x balanced XLR male, Suitable for line devices, such as laptops, CD players etc. to microphone input of...

See Details

Heat-resistant, transparent polyester adhesive tape for sticking colour films together

See Details

Ideal for wireless systems and effect devices, 5 RU usable height, 23 cm installation depth, 25 x 22 mm Aluminium edges, Continuously adjustable...

See Details

Double-door with hinged and retractable in the case lids, 18 U usable height, Rack rails spring-mounted in the case at the front and rear, Stable...

See Details

Especially for PC sound cards and AV devices, RCA Thru connections, 2x 6.3 mm jack 3.5 mm stereo jack input with -10 dB, XLR L / R outputs,...

See Details

With micro USB-B connector, For charging the SB902 lithium ion batteries directly in the GLXD handheld transmitter or pocket transmitter

See Details

Consists of 1 modified E435 speaker & 1x EA 600 amplifier, Can be extended with up to 3x E435 or 1x E835

See Details

-30 dB, Ground lift switch per channel, Additional parallel XLR output on the rear, Gold-plated Neutrik XLR connectors, Made in Europe

See Details

Eliminates hum caused by ground loops, For balanced and unbalanced signals, Linear frequency response from 20 - 20,000 Hz, 2x 6.3 mm Jack inputs,...

See Details

For Presonus Studio Live 16 Series III, 30 x 30 mm aluminium edges, 4 Butterfly locks, 4 Folding handles, Steel ball corners, 2 Skid strips, 13 cm...

See Details

Suitable for two loudspeaker stands up to max. 115 cm

See Details

For craft and stage applications, 55 mesh PET / rayon fabric with natural rubber adhesive, 55 Mesh

See Details

Padded, With zipper in the front and back, Padded handles, Large outer pocket, Installation depth 14" (35.5 cm), Fitting replacement screws...

See Details

For sticking together and bundling cables, For coloured marking as well as for fixing carpet edges in trade fair construction, Especially for...

See Details

Suitable for the stageClix Jack V3 transmitter

See Details

For Seven Sisters series and Violetta Delay, 3.7 V, 820 mA

See Details

For ALC 69/89 chargers, 9V tray with handle

See Details

With "one-touch" pull handle, Mounted wheels on the ground, Lid and bottom removable, Rack rail front and back, Butterfly closures, 2 Handles,...

See Details

Made of 7 mm birch plywood, 6 U, 2x Lids, 4 Spring-loaded butterfly latches, medium, 4 Folding handles, 25 x 25 mm aluminium profile edges,...

See Details

With Jensen transformer, -15 dB Pad and Merge on each channel, XLR in/out, 180° Phase reverse per channel, Ground / Lift switch

See Details