Displaying 1-55 of 55 products
Professional Cable Tester
LED error indicator, Battery testing LED, Logical and unambiguous LED indicator, Incl. measuring tips, CAT5 (ethernet)
SPL Measuring Device
Hand device with Condenser-Microphone (spherical characteristic), Measuring range from 31.5 Hz to 8 kHz, 6 Ranges in 10 dB-steps (30db up to...
Analogue Audio Signal-Generator
With sine, pink and white noise, Delay test signal, Polarity test signal, Sweep signal for every frequency range, Cable test function, Impedance...
Audio- and acoustics-Analyser
For noise surveillance and checking of audio-Devices, Including M4261 measuring microphone class 2, WAV-recording for documentation of measured...
Display with Measuring Microphone
Standalone device, but can also be connected to Dateq SPL-5
DB Meter
For rack mounting, Measures the decibel level of the sum signal, Produces interesting lighting in your amplifier rack, LED indicator changes from...
DSP-controlled 8-in-1 cable tester
Equipped with inputs and outputs for XLR, SpeakerTwist, 6.3 mm and 3.5 mm jack, Cinch, RJ45, MIDI and USB, LED display, Continuity testing and...
Cable Tester
Micro-Processor-Controlled cable tester, For XLR, mono- and stereo-jack (3.5 mm / 6.3 mm), TT, RCA and MIDI, Detection and indication of...
Cable Tester
Divisible housing for testing long cables easily, 3.5 mm mini jack, BNC plug, RJ45 plug, RJ11 plug, RCA plug, 3-Pin and 5-pin DIN MIDI plugs
Test-Set with M4261 Measuring Microphone
Includes measuring devices and accessories for precise acoustic measurements and inspection of analogue audio systems, M4261 class 2 measuring...
Digital Sound 8922
SPL Measuring Device, Hand device with Condenser-Microphone (spherical characteristic), Measuring range from 31.5 Hz to 8 kHz, 6 Ranges in 10...
Calibrator
Class 2, Compliant to ANSI S1.40-1984 and IEC 942-1988, For 1", 1/2" and 1/4" microphones, Weight approx. 200 g including battery, Including...
Signal-Generator
Requires 48 V phantom power, Muting between each mode, XLR connector
Cable Tester
LED error indicator, Logical and unambiguous LED indicator, Battery testing LED, Incl. measuring tips, Operates with optional 9V battery (not...
Sound Level Meter
For monitoring SPL, Ideal for discos, live appliances and more, Ungauged, With big LC display, Selectable A/ C weighting modes, Measuring range...
Cable Tester
With LED error- indicator and battery indicator LED, Logical and unambiguous LED indicator, Speaker twist, RCA, 5 pin DIN
Analogue Audio Analyzer
For sound level (RMS, relative, peak), THD+N, VU & PPM, frequency, signal balance, polarity via built-in microphone, Time and frequency sweep, 1/3...
Stereo Bluetooth Receiver
2 x Balanced XLR out, Integrated adjustable headphone amplifier with 3.5 mm stereo left-hand connector, Switchable ground lift, Switchable mono...
Passive Cable Splitter
RJ 45 socket to 4x XLR 5-pin female, Analogue stage box that uses the 4 wire pairs + shield of a network cable instead of a 4-channel multicore to...
Analogue Audio Signal Generator
Sine, Pink noise, White noise, Polarity test signal, Delay test signal, Graphics-capable backlit display, XLR and RCA outputs, USB input, Powered...
XLR Cable Tester
With separate sender/receiver plug for testing of distant XLR connectors, LED Indicator, Including table of possible LED combinations
8-Channel line level auto switcher
Redundant backup switch, For live applications from previously recorded backing tracks, Switches to a second backup multi-track system if an error...
Audio- and acoustics-analyser
For noise surveilance and checking of audio-Devices, WAV-Recording for documentation of measured signals and comments onto memory card (2GB Mini-SD...
Audio- and acoustics-analyser
For noise surveilance and checking of audio-devices, WAV-recording for documentation of measured signals and comments onto memory card (2GB Mini-SD...
Signal Generator
With the built-in 1 Watt amplifier this device is ideal for (8 Ohm) speaker tests, Line output for active speaker or mixer tests, Tunable frequency...
Speaker Twist Cable Tester
With separate sender/ receiver plug for testing of distant speaker twist connectors, LED indicator, Including LED chart
Phase Tester
For checking acoustic transducers (loudspeakers, microphones) as well as electrical audio accessories, Consists of a signal generator and a...
Speaker Test Device
The ideal accessory for the sound engineer, Quick testing of speaker systems without additional equipment, 1 W Output power at 4/8 Ohms, Tunable...
Passive Cable Splitter
From RJ 45 socket to 4x XLR 5-pin male, Analogue cable whi that uses the 4 wire pairs + shield of a network cable instead of a 4-channel multicore...
2-Channel 3-Way Line Splitter
2 Inputs/ 6 Outputs, For connecting one mixer with more than one power amplifier, Groundlift switch per channel, Robust metal housing
Cable Tester
6-Way switch, Suitable for 6.3 mm jack and mono jack, 3.5 mm jack and mono jack, XLR, RCA / phono, speaker twist, MIDI and banana jacks, Manual...
Protection Adapter
Protects MR-Pro against 70V / 100V back-up voltage for impedance measurements
1/2" Electret Capacitor Measuring Microphone
With omnidirectional characteristics according to IEC 60651, Type II, For ML1, Calibrated, Battery power, For acoustic and sound level...
DMX Cable Tester
With seperate sender/receiver plug for testing of distant DMX-Connectors, LED Indicator, Including LED chart
IR Volume Controller
2 RCA inputs, 2 RCA outputs, Includes matching IR remote control and power supply
Test Signal Generator
Output for test signal, Sine and square-wave signals, 10 dB pad for calibration, Linear 20-20,000 Hz
Charger
For XL2, For an efficient and fast charge of the Li-Po battery, Incl. Replacement battery
Jack Cable Tester
With separate sender/receiver plug for testing of distant jack connectors, LED indicator, Including LED chart
Transformer
Low to high impedance, With 24 dB voltage amplification, 75 - 300 ohms, Frequency range 20 - 20,000 Hz, XLR-Female > Jack female
Cable Test PlugThe test plug is required for single-ended installations. A cable end is connected to the MR-PRO and the test plug is connected to the remote end of the cable. A detailed cable test is performed by the MR-PRO.
Divisible housing for testing long cables easily, 3.5 mm mini jack, BNC plug, RJ45 plug, RJ11 plug, RCA plug, 3-Pin and 5-pin DIN MIDI plugs
Analyser for Digital Audio Signals
Analyzed AES3, S / PDIF, TOS link, ADAT Interface, Digital Audio Analysis, Carrier Status Analysis, Carrier Signal Measurement, Dual Domain Monitor...
Acoustic Analyzer with USB InterfaceThe combination of acoustic and electrical measurements makes the Acoustilyzer an ideal measuring tool for audio technicians, system installers, multi-media specialists and acousticians.
Optionally AL1STI-PA (not included in the scope of delivery) can also be used to measure speech intelligibility
Acoustics Set M2211
Includes devices and accessories for precise sound measurements and inspection of analogue audio systems, Inlcudes set case, Minirator MR-PRO, ASD...
Digital Audio Signal Generator
Surround test sequences to check for Dolby Digital, Dolby Digital, Dolby E, Pro-Logic II, DTS and DTS-HR installations, Synchronises AES3, DARS,...
Portable Impedance Meter
For high impedance loudspeaker lines, The measuring range can be set in 3 ranges (20, 200 and 2,000 Ohm), Clear and simple operation, Gem. IEC-1010...