Displaying 4426-4500 of 5148 products
Mounted Speakers
Waterproof (IP55), 1 Speaker twist input, 1 Speaker twist output
19" Double Door Rack
Infinitely adjustable rail (no fixed increments or steps) at the front and rear, Robust aluminium profile, Ball corners, 1 Suitcase handle, 4...
19" Touring Rack with Shock Absorption
Double-door with hinged and in the case retractable lids, 12 U Effective height, Rack rails spring-mounted in the case at the front and rear,...
Carrying Case
For the upper part of the Turbosound IP3000, Padded, With shoulder strap
Mixer Case
For Yamaha MG24/14FX, 30 x 30 mm aluminium edges, 4 Spring loaded butterfly latches, 4 Folding handles, Medium ball corners, At least 1 cm foam...
Passive Mono Channel DI box
For balancing and adjusting unbalanced instruments and devices, High-quality high-end transformers, High bandwidth and maximum insulation, Very...
Replacement Ear Cushions for the InEar StageDiver Series
FIRPhase technology, Digital amplifier with DSP processing
Active Full-Range Multifunction Speaker
Bi-Amp, DSP with 4 presets, Mic / Line switch, 2 Stereo inputs, HP filter, XLR input and output, 4 x M10 rigging points, 35 mm Stand flange mount,...
EV ZLX 15P
Active 15" Loudspeaker, 1000 Watt Class D amplifier, 15" woofer and 1.5" compression driver, Built-in DSP with Display, 250 Watt continuous and...
19" Double Door Rack
6U Effective height, 35 cm Installation depth, Stable aluminium profiles, Corners, Gripped case, 4 Snap locks, Stepless rack rail at the front, 4...
6 U Rack
6 RU effective height, 45 cm installation depth, 22 x 22 mm and 25 x 25 mm aluminium profile edges, Continuously adjustable rack rail, Front and...
12 Channel Mixer
With digital effects processor and compressor, 6 Microphone / line inputs with 3-band EQ, Channel 5+6 mic or stereo input, Channel 1-4 with...
Passive full-range speaker
With bass reflex housing, Connection panel with 2x Speaker Twist sockets, Birch plywood casing, 36 mm dual tilt stand flange mount, 3x Rigging points
Case
For Yamaha MG102 c, MG82 CX and MW10 c, 22 x 22 mm Aluminium edges, Small steel ball corners, 2 Snap action locks, 1 x suitcase handle, At least 10...
Terminal block for CURV 500 SmartLink adapter
For speaker cables with conductor cross section up to 1.5 mm²
Active Full-range Loudspeaker
Class D bi-amped, Equipped with 3 x 8" midrange-/tweeter speaker, 1 x 1" tweeter, DSP - Input - Limiter, XLR/Jack - combination in, XLR Thru, 5x M8...
Compact 3-Channel Mixer
The Promix mix 3 microphone signals (XLR) to 1 mono signal, Maximum Gain + 60 dB, Input impedance 600 Ohm, Maximum input level -14 dB, Maximum...
Protective cover
Suitable for TA12 and T12, Made from water resistant high-quality nylon
Mixer Case
Custom made flight case for Behringer xenyx UFX 1604, Foam padding, 4 Spring loaded little butterfly latches, Strap handle, 4 Rubber feet, Steel...
Replacement Silicone Tips
For the Fischer Amps FA earphones, 3 Pairs per pack, ...and more
Complete amp module
2-Way power amplifier module with integrated crossover, 1 Jack and 1 XLR input
Rack Trolley
2 U, With "One-Touch" pull handle, Fixed wheels on the bottom, Rack rail on front and rear, Black hard plastic housing
Triple Door Live Rack 6U
With 19" slanted mixer mount, Detachable top, front and back, Continuous rackrail with rubber inserts in the front and back, 6 U, Continuous...
19" Double Door Rack
Stable aluminium profiles, Ball corners, 2 Handles, 4 Spring-loaded butterfly closures, Stepless rack rail at front, 4 Large rubber feet on bottom,...
19" Flight Case
Custom made flight case for Soundcraft si ex 1 performer 1 and si compact C16R, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, 15 mm Sides...
DJ case
Suitable for Pioneer DDJ-SR and DDJ-RR controller, With sliding laptop shelf, Space for connections, Removable lid, Suitcase handle, 2 Butterfly...
Mixer Transport Case
For Mackie ONYX 1620, 30 x 30 mm Aluminium edges, 4 Spring loaded butterfly latches, 1 Folding handle, Medium ball corners, 4 Rubber feet, All...
Silicone Tips
Suitable for Westone earphones, Size code "Orange" corresponds to L
Crossover
Passive 2-way mono high pass/low pass 6.3 kHz crossover, For BMS 4590-16 Ohm driver, 18 dB high pass, High frequency EQ, 12 dB low pass, Only...
Active Full-Range Speaker
Class D Bi-Amp, "EasyControl" DSP interface with delay function, Dual-band limiter, 2 High-resolution microphone preamplifiers, Digital sound...
Active Full-range Loudspeaker
FIRPhase technology, Digital amplifier with DSP processing
Active Loudspeaker
1000 W Peak Class D amplifier, Bluetooth streaming, Built-in DSP with display
19" Standard case
Made from 7 mm birch plywood, 2 U Installation height, 2x Lids, 4x Small, spring loaded butterfly latches, 2x Folding handles, 25/25 mm Aluminium...
Made-to-measure Mixer Case
For Roland RSS V-Mixer M200i, 30 x 30 mm aluminium edges, Foam padding, 4 Spring-loaded medium butterfly locks, 3 Folding handles, Rubber feet,...
Professional active discrete class-A DI box & preamp
A + B input, 1x 6.3 mm Jack microphone input, 1x Direct thru output, 1x Tuner output, 1x XLR male output, 1x Remote output, Adjustable low cut from...
Wall Loudspeaker
8" Low frequency, 1" Tweeter, 160 Watt, 8 Ohm, 115 dB (maximum), Weight 12.2 kg, Includes back plate for horizontal mounting
100 V Installation Loudspeaker
Waveguide rotatable, Passive crossover with overvoltage protection, Built-in transformer for ELA applications (25/50 / 100W, 100V)
Mackie Thump 18s
Active Bandpass Subwoofer, Class D Amplifier, Peak SPL 130 dB, 2 XLR Input for Mono or Stereo application, 2 XLR Highpass Output for Top's, 2 XLR...
10 " Speaker Bag
Suitable for QSC K10, Turbosound iQ10 or Yamaha DXR10, Waterproof polyester, Dual zipper, Large outer pocket for cables and accessories, Reinforced...
2-Way 10" Passive Loudspeaker
3 Attachment points with M10 thread, Possibility to use as a floor monitor, Plastic housing
Matchbox DI Box
DI box for impedance conversion from high- to low-impedance, Balanced, Ground lift, 40-dB attenuator for line level signals, 2x 6.3 mm jack...
Professional Passive DI box
Strong metal version for portable applications, Jack in - 1x parallel out, XLR in - 1x parallel out, 2x isolated XLR out, Ground lift
Active 2-Way Loudspeaker
With USB wireless connection, "Wireless ready" for the Behringer Digital Wireless System (not included), Ultra-Low Noise Mic / Line input with...
Shockmount Rack
Plastic rack with internal shock absorbers on all corners, Butterfly latches, Two handles, Black hard plastic housing
19" Rack Case
3 HE, Extra compact rack - ideal for wireless systems, effects units, etc., Double door version, Spring locks, With grips, 25/25 mm Stepless rack...
Mixer with Integrated Effect Unit
48 V phantom power, Master section with master-mute, peak LED, output level, 2-TK send and controllable 2-TK return, 16 Digital effects, Mute...
Protective Cover Set
Casterboard with lashing belt, 1 Case for subwoofer, 2 Cases for satellites
Mixer Case
For Soundcraft Ui 12, 22 x 22 mm Aluminium edges, Foam padding in the lower and upper part, Mounting board with hook and loop fastener strips,...
Mixer Case
For Allen & Heath ZED-R16, 30 x 30 mm aluminium edges, Steel ball corners, 4 Medium butterfly closures, 1 Strap handle, 10 - 40 mm foam padding,...
Passive full-range multifunctional speaker
Equipped with 12" and 1" speakers, Monitor angle, 2x Speaker Twist NL4, 2 x M10 fly points, 35 mm stand flange mount, Robust plastic housing
2-Channel Passive DI Box
Neutrik connections, 6.3 mm jack input, XLR output, 6.3 mm jack Thru, Ground lift, OEP / Carnhill transmitter, Robust housing
Passive DI Box
In a strong metal housing for portable applications, Convert from high-impedance to low-impedance, From instrument connection to microphone inputs,...
Hard Case
Suitable for Elektron Analog Four MKII / Analog Rytm MKII, With EVA foam padding, Shoulder strap, Space for power adapter and cables, UDG no. U8462BL
Unimix Microphone Mixer
Combines 2 microphone signals to one output, Balance control for mixing the two microphones, Requires 24 - 48 Volt phantom power and also passes it...
Replaceable Ear Pads
Made of silicone, For HDE 2020 V2, Particularly soft
6 Channel Mixer With Digital Effects Processor
2 Microphone / line inputs with 3-band EQ, 2 Stereo input jacks and RCA with 2-band EQ, Stereo return jack, RCA 2-track in / out, Switchable +48 V...
Custom Hood Case
For Presonus-Studiolive-AR 8 USB, 22 x 22 mm Aluminium edges, 2 Butterfly latches, 1 High-quality synthetic leather grip, Steel ball corners, Foam...
Replaceable Ear Pads
Suitable for Fender CXA, DXA and FXA InEar handset
Swivel bracket
Suitable for LD Systems Stinger LDEB 122 / 122A G2, Includes mounting materials
Installation Loudspeaker
2 x 3.5 inches + HF, 150 W, 8 Ohms, 85 Hz - 20 kHz, Incl. wall bracket, Price per pair, Built-in transformer
100V Broadband Wall Loudspeaker System
13 cm Speaker system, 6 W Transformer, Without knobs
19" Rackbag
6 U, Lid with zipper on front and rear, Large external pocket, Rack screws included
Small Mixer
Minimix, 2 Stereo line inputs (3.5 / 2.5 mm jack), 1 Stereo output (Cinch), Separate level for each channel, 3.5 mm Headphone output
Mixer Case
Custom made flight case for Soundcraft LX-7 32 channel, From 7 mm birch plywood, With 30 x 30 mm aluminum edge, Foam padding, 4 Spring loaded...
In-Wall Speakers
120 / 240W, Power in 100 V operation 50 W, 25 W, 12 W, 2-Way system, -10 Degree swivel amiability, Sensitivity 90 dB (SPL, 1 W, 1 m), 102 mm...
Active 2-Way Full-Range Speaker
1000 Watt Class D amplifier, Integrated digital mixer, remotely controllable via smartphone, Audio transmission via Bluetooth, DSP presets for...
Active Monitor/Fullrange Speaker
10" Low/mid range, 1" tweeter, Class D amplifier, Connection panel with mic/line input, volume control, LF + HF EQ, Black plywood housing with...
Active Full-Range Speaker
With integrated 1000 Watt Class D power amplifier (650 W + 350 W biamped), 64 - 18,000 Hz (+/- 3 dB), 134 dB max SPL, Connection panel with 2x XLR...