PA Equipment

Suitable for DXR 10

See Details

With integrated 1000 W Class D power amplifier (650 W + 350 W, biamped), 1x 12" + 1" with 1.75" voice coil, 72 - 20,000 Hz (+/- 3dB), 135 dB Max....

See Details

2 x 18" RCF Woofer with 4" VC, Bass reflex design, Digital amplifier with 5000W/Peak, 2500 W/RMS, DSP controlled incl. fast limiter, Integrated...

See Details

With integrated 1000 W Class D power amplifier (650 W + 350 W, biamped), 1x 12" + 1" with 1.75" voice coil, 72 - 20,000 Hz (+/- 3dB), 135 dB Max....

See Details

Wth high-fidelity sound, 3-Way high-end balanced armature driver, Integrated passive crossover for the perfect tuning of the drivers, High...

See Details

Class D amplifier, Bi-Amp, Mic / Line XLR female input, XLR male output, 36 mm speaker flange

See Details

10 Channel Mixer, 2 Mic Inputs with 48 Volt phantom power, Internal 24-bit processor, 3 Band EQ, 1 Aux (post), Peak LED, 4 Stereo-Inputs with 1...

See Details

4U, Lid with zipper in front and back, Installation depth 41 cm, Large exterior pockets, Incl. rack screws

See Details

175 W (Noise), 350 W (PGM), 700 W (max) / 8 Ohm

See Details

Custom made flight case for Allen & Heath Qu-16, From 7 mm birch plywood, black coated, 30 x 30 mm Aluminium edges, Foam padding, 4x Spring loaded...

See Details

for Allen & Heath Qu-24, From 7 mm birch plywood, coated, 30 x 30 mm Aluminium edges, Foam padding, 4 Folding handles, 4 Spring loaded medium...

See Details

Standard 2-pin cable, Suitable for HL1 series, HL4 series, HL5 series and HL7 series, Bending elements for better hold, 3.5 mm Jack plug

See Details

Set of 4, For acoustic decoupling of LS boxes from the stand area, Slim design, With support and nuts

See Details

Matching plastic feet, For monitor operation of PA 302 and PA 202 (active, passive), Comes as a pair

See Details

64 Channel x 27 bus, Equipped with 8 mic / line inputs, 16 Analogue outputs, 2 AES inputs, 3 AES outputs

See Details

Up to 168 input channels, 99 Synchronised phase coherent mix buses, HyperMAC and AES50 network for up to 288 inputs and 294 outputs at 96 kHz...

See Details

Suitable for ART 715A / 725A / 415A / 425A, Sold by the pair

See Details

Active Multifunctional Loudspeaker, Class D Power amplifier, EQ Presets for PA, DJ, monitor or vocals, Built-in 2 channel mixer with XLR, jack or...

See Details

12" RCF woofer with 2.5" voice coil, 1.4" RCF neodymium tweeter with 3" voice coil, FiRPHASE processing, Digital bi-amp including DSP, 1400 W /...

See Details

For 4x E 435 or 2x E835 (or EA 600) + 1 x EP 1, Padded

See Details

Suitable for the box PA302, PA302 A, PA202, PA 202 A, PA 203-12 A

See Details

Suitable for Alto TS315S subwoofer, Padded

See Details

4-Channel MixerThe 4-channel 402VLZ4 mixer features Mackies renowned Onyx preamps and extreme Compact design., 2 Mono microphone/ line inputs, 1...

See Details

Suitable for power amplifiers with high installation depth, 20 RU usable height, 45 cm installation depth, Continuous rack mount slot with rubber...

See Details

Can also be used as a 40° monitor, 36 mm Pole mount, M8 Rigging points, SpeakON connectors, Weather-resistant housing

See Details

Suitable for Soundcraft LX-7 II 24, 30 x 30 mm Aluminium edges, Min. 1 cm foam padding, 4x Spring loaded butterfly latches (medium), 4x Folding...

See Details

Perfect fit for the Allen & Heath SQ-7 mixer, With dog house, Cushions are made from hard foam and prevent the console from slipping during...

See Details

Suitable for CMS 600

See Details

Balanced signals are adapted to jack without interference, With Hi/Lo switch, Balanced XLR connector as well as 6.3 mm unbalanced jack

See Details

Power Twist input, Line / Mic combo input / XLR and 6.3 mm jack, 1 Link XLR output, Limiter, 8 Presets, With FRFR - full range flat response, High...

See Details

Suitable for IE 400 PRO and IE 500 PRO, Detachable, double-stranded cable for excellent absorption of structure-borne noise

See Details

Ideal to mark cables according to the length

See Details

Basspass design, 1x 18" High-power woofer with 4" VC, Digital amp with 1400 W / PRG, 24-Bit DSP incl. limiter and X-Over @ 80 / 100Hz, M20 pole...

See Details

To expand an ELEMENTS facility, 2 Latches / XLR combination jacks

See Details

With 6 drivers (2 x Bassweg, 2 x Mid and 2 x Hochtonweg), Impedance (@ 1 kHz) 30 ohms, Black case, Case, Instructions

See Details

For ELX118/P

See Details

8 Inputs, 2 Mic inputs with gold-plated XLR and symmetrical line inputs, 2 Stereo inputs with symmetrical TRS jack input, Extreme high headroom for...

See Details

Suitable for a Presonus StudioLive AR12 USB mixer, Made from 7 mm birch plywood, Phenolic resin coated, 22 x 22 mm Aluminium edges, 2 Butterfly...

See Details

For the Allen & Heath SQ-6, Dog house not included, Made from 9 mm plywood, Cushions are made from hard foam and prevent the console from slipping...

See Details

With integrated 1000 W Class D power amplifier (650 W + 350 W, biamped), 1x 12" + 1" with 1.75" voice coil, 72 - 20,000 Hz (+/- 3dB), 135 dB Max....

See Details

With integrated 1000 W Class D power amplifier (650 W + 350 W, biamped), 1x 12" + 1" with 1.75" voice coil, 72 - 20,000 Hz (+/- 3dB), 135 dB Max....

See Details

Bass Reflex Port, Equipped with 2x RCF 18" woofer with 4" voice coil, Integrated Digipro G3 class D power amplifier, Active crossover with...

See Details

Bi-amped Class-D Switching Power Amp, Integrated DSP with 2 switchable EQ presets, Monitor tilt, XLR in/out, Volume, 2 M6 fly points, 25 mm Stand...

See Details

With service hatch, Ball corners, Rack rails at the front and top, Stabilising rail

See Details

LED for signal / clip display, USB bus-powered, 44.1 / 48 kHz, 16-Bit, Incl. USB cable and power supply

See Details

Monitor angle, 2 x Speaker twist NL4, 2 x M5 fly points, 25 mm Flange mount, Black plastic housing

See Details

Equipped with 12" woofers and 1.35" tweeters

See Details

For Shure in-ear earpieces E2, E3, E4, E5, With zipper

See Details

Made of black painted metal, Decorative ring made of black plastic, Also available in other colours on request, Weight 16 g

See Details

Coated on one side with a very strong, flame-retardant acrylic adhesive, Does not rust or shrink, does not expand and is not electro-statically...

See Details

16 + 4 Faders, 8 Microphone/Line inputs, 1 Talkback, 16 Analog outputs, 3 AES inputs, 3 AES outputs, 1 DVI port for external monitor, 1 Foot switch...

See Details

Suitable for EVOX J8 and EVOX JMIX8, With rollers

See Details

Rack rails front and top, Ball corners, With stabilising rail

See Details

12 Channel mixer, 4 Mic inputs with 48 Volt phantom power, 3-Band EQ and peak LEDs, 4 Stereo inputs, 1 Post-fader AUX, 2 Track input and output,...

See Details

Detachable top, front and back, 10 RU effective height, 10 RU effective depth, 45 cm installation depth, Continuously adjustable rack rail with...

See Details

Re-amping interface for multiple sources, Stereo / Dual Direct Box, Pad circuitry for mic / instrument inputs, 2x XLR (balanced) / 1/4 "TRS line...

See Details

Ground lift switchable per output, Neutrik connectors, Sturdy, compact aluminium housing with protective corners made of hard rubber, Design and...

See Details

Ceramic magnet, Suitable for a hole cut with Ø 283 mm

See Details

100 V/ 6 W Transformer, With knobs and mandatory relay, Impregnated membrane, Perforated steel plate (galvanized and painted), Very flat (85mm),...

See Details

Waveguide rotatable, Includes wall bracket

See Details

For Sennheiser IE 40 Pro

See Details

Suitable for Westone earphones, Size code "blue" corresponds to S-long

See Details

With integrated 1000 W Class D power amplifier (650 W + 350 W, biamped), 1x 12" + 1" with 1.75" voice coil, 72 - 20,000 Hz (+/- 3dB), 135 dB Max....

See Details

Class D power amplifier, EQ presets for PA, DJ, monitor or vocals, Built-in 2 channel mixer with XLR, jack or RCA input, Built-in Feedback...

See Details

Suitable for Alto TS318S subwoofer, Padded

See Details

Ideal for wireless micro or in-ear transmitter / receiver, With double door, Rack rails front and back, With ball corners, Black handle on the lid,...

See Details

8-Channel Mixer, 4 XLR microphone inputs / line inputs, 48V phantom power, 3-Band tone control and balance, 2 Stereo inputs, Master output via 2 x...

See Details

6 U hard case with integrated wheels, Practical and robust, Removable lid on the front and back, "Roto Molded Polyethylene" made from recycled...

See Details

Euroblock in/output

See Details

For the active battery speaker system Roadboy, With 6.5" broadband speakers, Jack Input

See Details

For Behringer X32, At least 2 cm foam padding, 30 x 30 mm aluminium edges, 4 Spring-loaded medium butterfly latches, 10 Folding handles, Skid...

See Details

Suitable for guitars, basses and more, High-impedance 1/4" input with thru output and -15 db pad, Balanced XLR output with ground lift, Extremely...

See Details

Stereo Line Driver, Controllable input gain, Switchable low cut, Switchable ground lift, Stable metal housing, Extremely low noise, Incl. power supply

See Details

With integrated 1000 W Class D power amplifier (650 W + 350 W, biamped), 1x 12" + 1" with 1.75" voice coil, 72 - 20,000 Hz (+/- 3dB), 135 dB Max....

See Details

Consists of column holder for installing flush to the wall and 2 multipin connectors, Colour White

See Details