PA Equipment

For ANT BBM 3/5/8, Swivelling

See Details

Suitable for Westone earphones, Size code "green" corresponds to S-short, Contains 3 pairs

See Details

For DRK-IG for extended flight assembly of all INGENIA models on a truss or a theatre train

See Details

For 208 CL / CL, 106 / CPD 8

See Details

Class D amplifier, Bi-Amp, Mic / Line XLR female input, XLR male output, 36 mm speaker flange

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

MIL-STD-C-4150j, Injection-molded housing, Made of polypropylene copolymer resin, Removable rack frame, Molded hinge, Patented trigger unlocking...

See Details

Suitable for the Alto TX208, Padded, Made from high-quality nylon, "Slip-On"-Design, Includes strap

See Details

24 Analogue D-PRE inputs - max 48 Channels 2x 2TR in and USB in, Touchscreen, USB 2.0 Interface, 16 XLR Outputs, 1 Knob compressor, 1 Knob EQ,...

See Details

For installation and stage applications, Terminal block and speaker twist connection, 15 mm MDF housing, 4x M8, 4x M6 and 2x M10 fly points, Weight...

See Details

18" Woofer, 400 Watt Class D power amplifier, M20 Thread

See Details

Speaker simulation, Ground lift switch, Balanced and unbalanced outputs (XLR / jack), 0/-20/+20 dB switch, Status LED, Requires 9V DC power supply...

See Details

Waveguide rotatable, Passive crossover with overvoltage protection, Built-in transformer for ELA applications (25/50 / 100W, 100V)

See Details

With transformer, For high-quality voice and music playback, Internal switch with low inductance, Bass reflex tuning at 150 Hz, Self-extinguishing...

See Details

Consists of 1x CB12 and 2x CX8, Class AB output stage, Built-in DSP with FIR filter, Top unit CX8 with monitor slope, M20 thread, 36 mm box flange...

See Details

16 Ohms

See Details

Suitable for Dynacord TS 200

See Details

Suitable for HK Audio Linear 5

See Details

Ideal for drums, bassists, keyboard, etc, In-ear, Dynamic, closed, Stereo-KLI (3.5mm), Cable length 140 cm, Very good sound reproduction, Including...

See Details

With long handle for all Etymotic in-ear headphones, headsets and ear plugs, Standard, Dull, 5 Pairs

See Details

With lightning connector, remote control and microphone, suitable for all Shure SE earphones with detachable cable (SE215, SE215m+SPE, SE315,...

See Details

Suitable for in-ear earphones and hearing protection, Shockproof housing, Zip and carabiner, Fleece lining

See Details

Includes universal mounting clamp for drum stool, 50 W, 4 Ohm, 3 m Connection cable

See Details

Silver

See Details

Suitable for ART 708/408, Incl. screws, Price for pair

See Details

Active Fullrange Loudspeaker, 10" RCF Woofer with 2" VC, 1" RCF compression driver with 1.4" VC, Digital bi-amping with DSP, 800 W/PRG, 400 W/RMS,...

See Details

1 x Mono channel with XLR / 6.3 mm combi jack (Mic / Line), Level adjustment, 2-Band EQ and pan control, Gain and peak controls, 1 x Stereo channel...

See Details

2 Microphone inputs, 2 Stereo line inputs, 3-Band EQ, With MP3 player, plays directly from USB stick, Stereo effects device, Aux/FX send

See Details

Mono channel with high-quality Mic/Line preamp, Hi-Z, low-cut and 2-band equaliser, 2 Stereo channels - 1x jack, 1x RCA, 2-Track USB...

See Details

Rack version of the Yamaha TF1 digital mixer, 16 XLR/6.3 mm combo connectors, Stereo RCA inputs, Up to 40 mix channels, Up to 64 inputs / outputs...

See Details

2-Way full-range cabinet (12 "+ 1,75"), 1.75"compression driver with titanium diaphragm for optimized high-frequency reproduction, Multifunctional...

See Details

Active 18" Subwoofer, Digital amplifier with 1400 Watt / 700 Watt-RMS, Integrated DSP for X-Over and short-circuit protection, 2 x XLR-Input, 2 x...

See Details

Made to measure mixer case for A&H ZED60-14FX, Made of 7 mm birch plywood, 25 x 25 mm aluminium edges, Foam padding, 2 spring loaded Butterfly...

See Details

Specially for piezo users of orchestral instruments, Smooths out peaks, 48 V Phantom power, Handle in, Jack out, XLR out, Switchable HPF,...

See Details

For Allen & Heath SQ7, 30 x 30 mm Aluminium edge, Foam padding, 4 Spring-loaded butterfly closures, 6 Folding handles, 4 Steel ball corners, 4...

See Details

Power supply via 9V block or 48V phantom, 30 db pad switch, Gnd-lift switch

See Details

With Bass Boost High-Quality Sound, 2-Way system with 4 high-end balanced armature drivers, Integrated passive crossover for the perfect tuning of...

See Details

Active 18" Subwoofer, Internal crossover, PU Coated, Butterfly handles, Transport wheels, Price for two

See Details

Fast drying 1k aqueous paint with very good surface hardness

See Details

Suitable for L3S, L3M and L3T, M20 thread

See Details

Compact plug and play column system for monitor and PA sound systems, High-quality appearance (Porsche Design Studio), Aluminium body, LD Systems...

See Details

Detachable top, front and back, Continuous rack-rail with rubber inserts in the front and back, 12U, Continuous rack-rail with rubber inserts in...

See Details

12 Input channels, 8 Mono inputs with MIDAS mic pre-amps, 2 Electronically balanced stereo inputs (jack), 3-Band channel strip EQ with tunable...

See Details

Class D power amplifier with 300 W for LF, Class AB power amplifier 50 W for HF, Control panel with level, preset switch (FOH/Monitor) and GND...

See Details

Dispersion pattern 90° x 60°, 3 Attachment points with M10 thread, Signal Synchronized Transducer, Possibility to use as a floor monitor, Plastic...

See Details

Dispersion pattern 90° x 60°, 3 Attachment points with M10 thread, Signal Synchronized Transducer, Possibility to use as a floor monitor, Plastic...

See Details

A very compact 18" bandpass subwoofer, 1200 watt class D power amplifier, DSP with 4 presets, Stereo input, Link output, HP output, M20 stand...

See Details

Ideal for today's sound engineering needs, High-performance 1,600 W Class-D amplifier module, 96 kHz DSP for true hi-resolution sound with...

See Details

Suitable for keyboard, A / E guitar, bass, etc., PAD switch (- 20 / -40 dB), Ground-lift switch

See Details

Jack input, jack thru out and XLR out per channel, Switchable 15 dB pad, 180° Polarity and Gnd / Lift switchable per channel, Input and Thru...

See Details

Full and warm tone

See Details

With bass-driven sound, 4-Way high-end balanced armature driver, Integrated passive crossover for the perfect tuning of the drivers, Bass boost...

See Details

Suitable for loudspeaker systems of the PULSAR series ( PL 112 FA, PL 115 FA) and LINEAR 5 (L5 112 F/FA, L5 115 F/FA, L5 LTS/LTS A), LINEAR 3 (112...

See Details

Universal foam pads

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

Suitable for B210 / B210D

See Details

Black textured lacquer, Pole mount, M10 rigging points, Developed in Germany

See Details

Infinitely adjustable rack rails on the front and back sides, Sturdy aluminium profile, Rounded ball corners, 4 Folding handles, 4 Butterfly...

See Details

12 Channel mixer, 6 Mic inputs with 48 Volt phantom power and 75 Hz low cut, Compressor and insert for 4 mic channels, 4 Stereo inputs, 3-Band EQ,...

See Details

48-channel digital mixer, 19" rack mountable, With 96 kHz FPGA processing, 17 faders / 6 layers, 12x stereo mixes (perfect for in-ear monitoring...

See Details

With integrated ClassD digital power amplifier, Connection panel with 2x XLR/jack combi input, 2x XLR Link out and 2x XLR Line out, 36 mm Stand...

See Details

For eliminating ground loops, 2x XLR in/out, Switchable ground/lift, Switchable Polarity Reverse 180°, Especially suitable to eliminating sub-mixers

See Details

Compact plug and play column system for monitor and PA sound systems, High-quality appearance (Porsche Design Studio), Aluminium body, LD Systems...

See Details

Active subwoofer, Adjustable low-pass filter from 40 - 150 Hz, XLR (L + R) Throu, Ground lift shape and phase switch, 36 mm Pole-mount flange, Felt...

See Details

Class-D power amp, FiRPHASE technology, Protected circuit design, Limiter, Volume control, Maintenance-free convection cooling, XLR input and...

See Details

For ESI nEar05 (MK II version), 2-Way power amplifier module with integrated crossover, 1 Jack and 1 XLR input

See Details

For all UE-Pro and Ambient listeners from September 2010 to March 2018, Integrated remote control with microphone, Suitable for all iOS devices

See Details

U-bracket for horizontal mounting of an agate 204 on the ceiling or horizontally / vertically on the wall, A 3/8" screw is included, Multiple...

See Details

For Shure SE in-ear headphones, With zipper

See Details

36 mm Stand / Tripod flange mount, Aeroquip rails are located on top, Suspension points are located on the back, Developed in Germamy

See Details

2 U, With front and back zippers, 41 cm Installation depth, Large external pocket, Including rack screws

See Details

Suitable for EV ZLX 15 and EV ZLX 15P

See Details

Suitable for Alto TS312S subwoofer, Padded

See Details

16 Channel mixer with 60mm Faders, 4 Mic Inputs with 48 Volt Phantom power and 75 Hz Low cut, Compressor on each mic channel, Internal Klark Teknik...

See Details

48-Channel Digital Mixer, With 96 kHz FPGA processing, 25 Faders / 6 Layers, 12 Stereo mixes (perfect for in-ear monitoring setups) + LR, 3x Stereo...

See Details