Small Diaphragm Condenser Microphones

0 dB or -10 dB Pad, CineMag transformer, Includes microphone, shock-mount, pop protection, microphone holder, carrying case

See Details

Microphone set consisting of 1x SCHOEPS CMC 6 microphone amplifier and 1x MK 4 capsule, Max. sound pressure level 132dB, Includes 1 x SG20...

See Details

Consists of 2x paired SCHOEPS CMC 6 microphone amplifiers and 2x MK 2 near-field omni capsules, Includes 2x SG20 microphone clips and 2x B5D...

See Details

18 mm capsule, Recommended load impedance:> 1000 ohms, Incl. shock mount, windshield, tripod stand and male XLR to female XLR cable

See Details

Supercardioid, 70 Hz - 20 kHz (-2 dB), 48 V Phantom power required, Switchable high boost with +4 dB at 8 kHz, Switchable bass roll-off 50 Hz

See Details

Microphone set consists of 1x SCHOEPS CMC 6 microphone amplifier and 1x MK 41 capsule, Supercarioid polar pattern, Includes 1 x SG20 microphone...

See Details

Incl. bracket

See Details

With a thin, gold-sputtered diaphragm for instrument recording, Switchable -15 dB roll-off, Specifically suited for miking acoustic instruments and...

See Details

Warm and clear sound, Optimal 0 ° frequency response with slight elevation, Capsule head with adjustable tilt angle, 16 mV / Pa, Delivery in...

See Details

With special holder especially for snare and toms, Warm, natural sound with a smooth treble, 11-52 V Phantom power, 4-pin TQG connector, Optional...

See Details

48V phantom power required, XLR plug

See Details

With cardioid capsule and -10 dB pad, Requires +48V phantom power, Includes wooden case and clamp, Made in Russia

See Details

Of the highest quality, 40 - 20,000 Hz, 130 dB SPL max., Especially suitable for strings and piano acceptance, Low frequency dependence of...

See Details

Compatible with RODE NT4, NT5 and NT6, Including 10 year manufacturer warranty

See Details

Cardioid capsule, -10 DB pad, 20 Hz - 20 kHz, Comes in a wooden case, Made in Russia

See Details

Omnidirectional, P48, Prepolarized 5.4 mm membrane, Ideal for recording instruments live or in the studio

See Details

20 - 20,000 Hz, Switchable low cut at 80 Hz and 10 dB pad, Modular design - consisting of AT4900b-48 handle and AT4051b-EL cardioid capsule, Very...

See Details

With 18 mm capsule, Cardioid characteristic, Ideal for use with drums (overhead, hi-hat), acoustic guitar or piano, Frequency response 20-20000 Hz,...

See Details

With 1/2" cardioid capsule and changeable capsule with omnidirectional polar pattern, High-pass filter and pre-attenuation can be switched in three...

See Details

Calibrated stereo set, Universal studio condenser microphones with 4 capsule pairs, 2 x -10 dB pad, Requires 48 V +/- 2 V phantom power, Delivered...

See Details

Includes water and dust resistant aluminum cylinder for storage of the NTG-3, windscreen and RM5 microphone clip

See Details

Compact and slim design is ideal for placement in confined spaces, such as in front of a screen, 48 V Phantom power required

See Details

Suitable for K6 system, 40 - 20,000 Hz (+- 2.5 dB), 200 Ohm

See Details

141 dB SPL, 1 kHz, at 1% T.H.D., 11-52 volts, Especially for overhead and acoustic instruments, Includes AT8405a tripod clamp, AT8159 windscreen,...

See Details

Well suited for acoustic guitar and as a drum overhead microphone, Requires 48 V Phantom power, XLR connector

See Details

Modular design, 142 dB SPL max., 25 Ohm, Extremely low noise, Matte coating, Ideal as support microphone for the reproduction of instrumental...

See Details

Impact sounder switchable, 10 dB attenuator, 48V +/- 4V phantom necessary, Sym. ungrounded exit, Including storage case, clip and windscreen MZW41,...

See Details

Especially suitable for choir and orchestra performances, 22 to 48 V Phantom power, Battery supply possible, Includes clamp

See Details

Unobtrusive design suitable for drums, percussion, piano, wind and string instruments, Warm, natural sound with a smooth highs, 11-52 V Phantom,...

See Details

Cardioid, Linear transmission range, Ideal for the reproduction of strings and woodwind instruments, Phantom power or 1.5 V battery (AA), Clip and...

See Details

With 2 capsules in each (omni and cardioid) and -10 dB pad, Matched stereo pair, Incl. holder per microphone, In a wooden case, Made in Russia

See Details

Max. SPL 138 dB, 10 dB pad switch, High pass switch 80 Hz 6dB/oct., Requires 48V phantom power

See Details

Compact condenser shotgun microphone with high suppression of diffuse noise, Well suited for recording music, Sound remains unchanged when the...

See Details

0 dB or -10 dB Pad, CineMag transformer, Includes microphone, shock-mount, pop protection, microphone holder, carrying case

See Details

Cardioid characteristics, Exclusively made for Thomann, German production

See Details

Extremely low inherent noise, equivalent noise level 12 dB (A), Multi-stage switchable pre-attenuation, depth reduction and elevation increase,...

See Details

With 16 mm capsule, Cardioid characteristic, Frequency response 50-20000 Hz, 48V Phantom power required, With low cut (-3 dB @ 75 Hz o. 150Hz) and...

See Details

Optimized for acoustic instruments, Neutral and precise sound for stage and studio applications, Ideal for overhead, hi-hat, piano, choir and...

See Details

Modular capsule, For K6 system

See Details

Stereo tuned pair, Incl. micro clamps, stereo microphone holder and wooden case

See Details

Handmade small diaphragm condenser capsule, 13 dB (A) inherent noise, Requires 48 V phantom power, Includes windscreen and microphone clamp

See Details

0 dB or -10 dB Pad, CineMag transformer, Includes microphone, shock-mount, pop protection, microphone holder, carrying case

See Details

Long design, Polarised 1/2" super-cardioid capsule in high frequency technology, Directivity increased by interference principle, Requires phantom...

See Details

With separate capsule and power supply, 1/2" Membrane, Cardioid, Frequency response 40 Hz to 20 kHz, With switchable HPF at 80Hz / 12dB / octave,...

See Details

Extremely low distortion, Linear 0° frequency response 20-20,000 Hz, High max. SPL, Foam windscreen, Stand adapter

See Details

Requires +48 V phantom power

See Details

-10 dB Attenuation, Incl. microphone clamp, Made in Russia

See Details

0.8 inch small membrane, High Pass Filter, Requires 48 V phantom power, Incl. holder, windscreen and leather bag

See Details

With interchangeable capsules for all types of instrument recording, Lateral recording for unobtrusive positioning, All capsules available...

See Details

Pre-polarized double membrane, Dynamic range 114 dB, 48V Phantom power, Equivalent noise level, Successor to the DPA 4006

See Details

For professional recording and live applications, Switchable polar patterns (cardioid / omni), 20 - 20,000 Hz, 150 Ω, 24 k Gold-plated mylar...

See Details

Matched pair, 10/20 dB pad switch, High pass filter 75 Hz or 150 Hz switchable, Transformerless output circuit, 2 Micro-clips and 2x windshield...

See Details

Electric condenser microphone, Unidirectional, With 1.5 m cable, Sturdy metal housing, The handle can be attached to the microphone holder, The...

See Details

Includes shock mounts, microphone holders and carrying case

See Details

Stereo tuned pair, Incl. micro clamps, stereo microphone holder and wooden case

See Details

Precise cardioid polar pattern for uncolored sound quality and high gain before feedback, Open circuit sensitivity 10 mV / Pa (-40 dBV), SPL...

See Details

Switchable 80 Hz low cut, 250 Ω, 146 dB SPL max., Switchable 10 dB pad, XLR connector, Incl. tripod adapter AT8405a, windshield and plastic case

See Details

Requires 48 V phantom power

See Details

The Antelope Audio Mic emulation packs can be used to replicate various vintage replicas, Includes elastic holder

See Details

With 3 interchangeable capsules, -10 dB Attenuation, Incl. microphone holder in wooden box, Original Russian production

See Details

Switchable 80 Hz low cut, 250 Ω, Switchable 10 dB pad, XLR connector, Incl. tripod adapter AT8405a, windshield and plastic case

See Details

2 microphone capsules (matched pair) for Oktava 012 microphones

See Details

Compatible with RODE NT4, NT5 and NT6, Including 10 year manufacturer warranty

See Details

Cardioid characteristic, Frequency response 40 - 20000 Hz, Requires 22 -48 V phantom power, Incl. microphone clamp, In a case with molded lining

See Details

For choir, overhead and instrument recording, Supercardioid, Max 124 dB (139 dB with attenuation), Switchable low cut 250 Hz, Incl. microphone...

See Details

With omni capsule, The preamplifier is split into two parts with extension cable of 3 m, Incl. -10 dB pad, Silver, In a wooden case, Made in Russia

See Details

Requires 48 V Phantom power

See Details

For the Oktava 012 microphone series

See Details

For Oktava series 012 microphones, Silver coloured finish

See Details

Especially for saxophone and trumpet, Special 4-pin connector for use with Audio-Technica wireless systems ("HRS-type locking 4-pin-connector", not...

See Details

Cardiod, Modular design, 142 dB SPL, 25 Ohm, Extremely low noise, Matt coating, Includes MZQ 8000 microphone holder, MZW 8000 windshield and...

See Details

XLR connector, Battery 1.5V AA or phantom power 11-52 V, Switchable low cut 12dB/oct. @ 80Hz, Frequency range 20 - 20,000 Hz, Ideal for film/ TV/...

See Details

For semiprofessional AV applications, Excellent off-axis rejection, Lobar, 137.5 dB SPL max, Incl. bag 95A2313 and windscreen A89SW

See Details

Specially tuned to snare drum miking as well as other percussions such as djembe, congas, bongos etc., Requires 48 V phantom power, XLR connection,...

See Details

For Oktava Microphones from the 012 series, Black model

See Details