Microphone Phantom Adapters

2 Compartments, With +48 v Phantom power

See Details

For modular microphone system, Switchable HP, Includes microphone clamp, carrying case and a battery

See Details

Balanced XLR output, 2 three-pole TQG male inputs, Both inputs adjustable, On-off switch, Mic / Line level in the output switchable, 9 V battery...

See Details

2 channels, 2 XLR inputs, 2 XLR outputs, Switch for +12 V or +48 V, Including power supply

See Details

Switchable HP, Includes microphone clamp, Includes carrying case

See Details

For Beta series (for ex. Beta 53), XLR Male on TQG 4 pin male, Includes belt clip

See Details

For DPA systems, With belt clip

See Details

For electret microphones, Mini-XLR 3-pin on XLR-male, Suitable for ADX40, ADX60, MicroD, HT5

See Details

Particularly low-impedance output, Reliable protection against RF interference, Suitable for long cable lengths of up to 100 m

See Details

From EW connector to XLR, for example, for E 908 B EW, Robust metal chassis, Switchable gain (0/-12dB), Switchable roll-off filter (125 Hz (-3 dB),...

See Details

For C 519, C 518 and C 516 of L-Type and 500 X series, With integrated switchable bass roll-off switch

See Details

Balanced XLR output, 2 three-pole TQG male inputs, Both inputs adjustable, On-off switch, Mic / Line level in the output switchable, 9 V battery...

See Details

Selectable +12 / +48 V phantom power voltage, Suitable for all condenser microphones, XLR Female input (mic input) and XLR male output (mic thru),...

See Details

Suitable for condenser microphones and active DI boxes, XLR in/out, Fixed power cord, LED Indicator, External phantom power, On/Off switch

See Details

With XLR input and output, Transparent, quiet operation, Powered via power supply unit (included) or optional 9V battery, Displays power and...

See Details

For powering TG series microphones with 48V phantom power, 4-pin mini XLR male to 3-pin XLR male

See Details

Battery powered, Supplies up to two condenser microphones with 48V phantom power, Noise and distortion-free circuit, XLR connectors for balanced...

See Details

For DPA 4099 instrument series, With fixed 80 Hz LowCut filter, Includes belt clip

See Details

XLR in / out, 4 x 48V Phantom power, High quality sockets, Low installation depth, 19 ", 1U, Incl. Power supply

See Details

For K1 Plus, XLR connector, Contains the electronics for impedance matching, Integrated active electronics, High quality robust Mogami cable,...

See Details

With extended frequency response up to 40 kHz, For capsules from the MK series, Powered by 12V - 48V phantom power, Especially low-impedance...

See Details

For all Superlux microphones with 3 Pin TQG connectors, Operates directly with the mixing console such as Stagebox

See Details

Ultra-low noise preamplifier, High override resistance, Frequency range 10-30,000 Hz, Pre-attenuation +6, 0, -10 dB, switchable, Bass attenuation...

See Details

Amplifier part for the Oktava capsules of 012 series, Incl. microphone holder (clip), Made in Russia

See Details

For all Superlux microphones with 3-pol. TQG connection, For operation directly on the mixer or stagebox, Operation with 2x 1.5V AA batteries or...

See Details

48V phantom power

See Details

Up to 100 hours operation with 2x 1.5V AA batteries, Extremely low noise, LED for battery and phantom power, On / off switch, XLR output, TQG...

See Details

Provides 18V phantom power, Compact design, Low battery consumption due to microphone connection detection

See Details

For Retro Tube II

See Details

From 3-in Lemo connector to XLR for example, MKE 2-4-3, Robust metal chassis, Switchable gain (0/-12dB), Switchable roll-Off filter (125 Hz (-3...

See Details

Allows operation of OKM microphones at XLR input of a recorder, 3.5 mm mini jack (for OKM microphone) to 2x XLR male connectors, Operating with...

See Details

For DPA microphones with micro-dot connector, 3 dB Center attenuation at 800 Hz, Especially suitable for theater and acting applications, Includes...

See Details

Amplifier part for the Oktava capsules from the 012 series, Incl. microphone holder, Silver, Made in Russia

See Details

For Audio Technica wireless microphones with 4-pin connection, Includes belt clip

See Details

9V block or phantom power, EQ and volume control, Mute switch, XLR output, Suitable for LCM microseries

See Details

Phantom power for 2 condensation microphones, 48 V Phantom voltage, XLR inputs and outputs, Operation via external switching power supply incl. Or...

See Details

Phantom power for 1 condenser microphone, 48 V phantom voltage, Operation via external switched-mode power supply (included)

See Details

For up to 6 condensation microphones with 48 volt phantom power, Perfect for multi-track recording equipment, 6 XLR inputs, 6 XLR outputs, Built-in...

See Details

Allows operation of OKM microphones at the LINE input of a recorder, To improve the recording quality, For reducing distortion at high volume of...

See Details

With XLR-3 plug and 48 V phantom power, For connection to the microphone heads ME 34, ME 35, ME 36

See Details

2 x XLR female input, 2 x XLR male output

See Details

Phantom-powered XLR - connector cable, Contains electronics for impedance matching

See Details

For ME104, With phantom power, Straight connector to the microphone, XLR output

See Details

Phantom power for 2 condenser microphones, 48 V phantom voltage, Operation via external switching power supply (included)

See Details

For microphones with TQG connector (4-pin), Eg WCM 16, NOT BETA series, Incl. belt clip, hexagon socket and cable grommet, Suitable for all Shure...

See Details

Plug-in module suitable for MKH 8000 microphones, Dynamic range> 115 dB, Preamplifiers and transducers with sampling rates of 44.1 kHz, 48 kHz,...

See Details

2 Channels for stereo recording, XLR inputs and outputs, Power indicator, Groundlift switch, Built-in phantom blocker, Direct Switch - bypasses the...

See Details