Microphone Accessories

For electret microphones, Mini-XLR 3-pin on XLR-male, Suitable for ADX40, ADX60, MicroD, HT5

See Details

Suitable for all d:fine headsets, MicroDot connector

See Details

Screw clamp fits all common microphone stands

See Details

Screw clamp fits all common microphone stands

See Details

Nylon screen guarantees optimum sound filtering during studio recording, With flexible gooseneck, Can be screwed to all standard microphone stands,...

See Details

Battery-operated clip LED light for sheet music stands featuring 8 extra bright LEDs, Brightness can be adjusted between two levels, Clip...

See Details

Particularly low-impedance output, Reliable protection against RF interference, Suitable for long cable lengths of up to 100 m

See Details

Cable from L plug to phantom adapter, 3 m long

See Details

For TLM102

See Details

One side with 3/8" inner thread, Other side with 3/8" outer thread

See Details

For Shure Beta 58 (both wired and wireless model), Normal version, Silver gray with blue ring

See Details

3 Extendable parts, 5 Velcro straps for fixing cables to the boom pole, Rubberized handle at the end, Foam rubber grip 35 cm from the end, 5/8"...

See Details

Exclusively manufactured for Thomann, XLR Male / XLR Female

See Details

Fitting for the tbone EarmiKe, BodymiKe and HeadmiKe microphones, Set with 5 pieces

See Details

From EW connector to XLR, for example, for E 908 B EW, Robust metal chassis, Switchable gain (0/-12dB), Switchable roll-off filter (125 Hz (-3 dB),...

See Details

For handheld transmitter, pocket transmitter and 19" receiver, 7 mm birch plywood, 22 x 22 mm and 25 x 25 mm aluminium profiles, 4x Drawbolts, 1x...

See Details

Compatible with Line6 HS70T headset

See Details

With three Rycote double-lyre suspensions and enamelled stainless steel pop protection, For NT1, NT1-A, NT1000, NT2-A, NT2000, NTK, K2

See Details

From low to high impedance, With 24 dB signal increase gain, Can also be used in the reverse direction, Balanced 3-pin XLR (f) to 6.3 mm jack plug

See Details

3-Pin mini XLR, For AKG PT pocket transmitters (except PT40), the Samson UT1L and VT2L, and the 4060 miniature microphone

See Details

Compatible with 48 V phantom power, XLR male to XLR female, Robust metal chassis

See Details

One side with 3/8" inner thread, Other side with 3/8" outer thread

See Details

For EK 300 in-ear receiver G2/G3 and SK G2/G3 transmitter

See Details

With 3/8" inner thread and 3/8" screw thread

See Details

Screw clamp fits all common microphone stands

See Details

Screw-on, With 30 cm elastic arm

See Details

For C 519, C 518 and C 516 of L-Type and 500 X series, With integrated switchable bass roll-off switch

See Details

Pedal for dynamic microphones and line signals, Suitable as splitter, Switchable GDN lift, Suitable as talkback for communication between musician...

See Details

Compatible with DPA d:vote 4099 Series, Heavy duty version

See Details

For Beyerdynamic TS 300/800, Mipro ACT-707T/TE/TM/TS/MT103/303/801/808

See Details

4-Way collapsible, Length adjustable from 800 - 2825 mm, Internal cable routing possible, 3/8" Thread connector, Adjustment via clamp lever, Carry...

See Details

Screw clamp fits all common microphone stands

See Details

For Ovid systems, Easy to install without tools, Also suitable for transverse flute, clarinet etc.

See Details

For all large diaphragm microphones of 18 - 55 mm diameter and maximum weight of 500 g horizontal (750 g vertical), Up to 12 dB sound isolation, 25...

See Details

Screw clamp fits all common microphone stands

See Details

With foam inlay for 9.5" wireless systems, Slot for handheld/pocket transmitter, Velcro straps for mains adapter, etc.

See Details

For the t.bone and AKG wireless systems, 3-pin. Mini XLR (TQG) Female> 3-pin. Mini XLR (TQG) male, Made in Germany

See Details

For DPA 4066 and 4088

See Details

For Beta 87

See Details

With internal thread for screw mounting, XLR connector, E-assembly with integrated DPA power adapter for quick assembly and disassembly, For...

See Details

XLR female -> XLR male, Neutrik connectors

See Details

Easy to install without tools, Black rubber end caps protect the instrument from damage, Locking screw, Also suitable for trumpet, trombone etc.,...

See Details

For the Thon inlay system, 22 x 22 mm aluminium edges, 2 Small butterfly latches, 1 Suitcase handle, 2 Locking hinges, 8 Steel ball corners,...

See Details

Selectable +12 / +48 V phantom power voltage, Suitable for all condenser microphones, XLR Female input (mic input) and XLR male output (mic thru),...

See Details

Suitable for condenser microphones and active DI boxes, XLR in/out, Fixed power cord, LED Indicator, External phantom power, On/Off switch

See Details

TQG/XLR Female, For various Shure pocket transmitters

See Details

Suitable for miscellaneous CC6 foam inlays

See Details

For SM 57

See Details

3/8" Female thread to 3/8" male thread

See Details

Screw clamp fits all common microphone stands

See Details

Easy installation without tools, Black rubber end caps protect the instrument from damaging, Set screw

See Details

MD 42, MD 46, MD 425 and MD 431 II and all e800 and e900 microphones, Black, Incl. colour coding rings

See Details

Special industry waveform design, Reduces unwanted reverberation, Eliminated pop and wind noise without distorting the signal, Very flexible and...

See Details

With XLR input and output, Transparent, quiet operation, Powered via power supply unit (included) or optional 9V battery, Displays power and...

See Details

For the U 87 microphone, Swivel mount with with 5/8"-27 thread, Includes reducer for connecting to 1/2" and 3/8" thread studs

See Details

With Sennheiser EW plug for HSP 2 headsets

See Details

Screw clamp fits all common microphone stands

See Details

Switchable -15/-20/-25 dB, Adapter with XLR male/female, Prevents input overloads at high levels, Also suitable for use with phantom power

See Details

Complete with mute switch and housing cap

See Details

3/8" Female thread to 3/8" male thread

See Details

3-Way collapsible, Internal cable routing possible, 3/8" Threaded connector, Adjustment via clamp lever, Length adjustable from 1000 to 3220 mm,...

See Details

With flexible gooseneck and clip for drum edge

See Details

For TLM102

See Details

3.5 mm EW plug to 3-pin LEMO socket, For using EW pocket transmitters in combination with microphones with 2000/5000 LEMO connector

See Details

Suitable for E825/E835/E840, Metal grille with foam insert

See Details

Screw clamp fits all common microphone stands

See Details

Exclusively manufactured for Thomann, XLR Male / XLR Female

See Details

For small microphones with diameter of 17-22 mm, Elastic, High-quality plastic, 85035.000.55 3/8", Incl. Thread reducers 3/8"- 5/8"

See Details

For Electro Voice RE20/27 or PL10/20, 3/8" and 5/8" stand mount

See Details

For powering TG series microphones with 48V phantom power, 4-pin mini XLR male to 3-pin XLR male

See Details

Steel cable, Cable to LEMO (SK 50/250), Straight connection

See Details

With Sennheiser EW connector

See Details

One side with 3/8" inner thread, Other side with 3/8" outer thread

See Details

With integrated XLR extension

See Details

Black Yongsheng XLR plug (made by Neutrik), Incl. hook and loop fastener

See Details