Boundary Microphones

Combination of Beta 91 and SM 91, Switchable frequency range for bass drums or piano/ voice applications, 11-52 V Phantom power

See Details

Switchable frequency response for bass drum or piano / voice applications, Robust metal housing, XLR male output, Holes on the back for suspending,...

See Details

Condenser boundary microphone, Combination of Beta 91 and SM 91, Switchable frequency range for bass drums or piano/ voice applications, 11-52 V...

See Details

Switchable bass cut / boost, 3-pin TQG connector, Robust metal chassis, Incl. 4.6 m connection cable TQG / XLR and bag

See Details

Boundary microphone with integrated active EQ for miking cajon or bass drum, With hook and loop fasteners for attaching, Attenuation switch -10dB,...

See Details

Specially geared to bass drum pick up, Integrated pre-amp with XLR-output socket, male, Rubber plate for dampening

See Details

Combination of Beta 91 and SM 91, Switchable frequency range for bass drums or piano/ voice applications, 11-52 V Phantom power

See Details

For conferences and web applications, 12 Built-in condenser microphone capsules for 360° recording, Compatible with Zoom web conference software,...

See Details

Combination of Beta 91 and SM 91, Switchable frequency range for bass drums or piano/ voice applications, 11-52 V Phantom power

See Details

For cajon or bass drum recording, 11 - 52 V Phantom power required, Robust metal housing, Non-slip rubber base, Red phantom status LED

See Details

Optimised for speech applications, Resistant to HF interference due to HF filter, Incl. 3 m XLR cable

See Details

Specially geared for meetings and church altars, Integrated pre-amp with XLR-output socket, male, Rubber plate for dampening

See Details

With replaceable permanently polarised condenser capsules (cardioid, super-cardioid or omni-directional characteristics), For mounting on a table...

See Details

Especially for the bass drum recording, High boost at 8 KHz for a clean attack, Solid 1.5 m cable with XLR male connector

See Details

Optimised for speech applications, Resistant to HF interference due to HF filter, Incl. 3 m XLR cable

See Details

Specially geared for meetings and church altars, Including switch (programmable for on/off, PTM, PTT and "always on" and two coloured LED-Ring...

See Details

Specially suited for meetings and church altars, Integrated pre-amp with XLR-Output socket, male, Rubber plate for dampening

See Details

Condenser microphone, 130 dB SPL, Power supply via 1x 1.5 V AA battery

See Details

3-Pin XLR connector, 24 - 48 V Phantom power required, M20 thread

See Details

Sensitivity 9 mV / PA @ 1k, For speaking, theatre and broadcast applications, 3-Pin mini XLR connector, 9-52 V phantom power operation, Mini XLR...

See Details

Optimised for speech applications, Resistant to HF interference due to HF filter, Incl. 3 m XLR cable

See Details

Half omnidirectional, With programmable switch, Status LED, TQG cable to XLR, Exchangeable capsule (modular), Very flat design, Very linear...

See Details

For table and ceiling mounts, XLR connection, M20 screw thread

See Details

Half-omnidirectional polar pattern, 20 - 20,000 Hz, 128 dB SPL max., Includes active cable for connection to CMC 5 or CMC 6

See Details

Especially for conference situations and altars in churches, With switch (programmable for on/off, PTM, PTT and "always on") and two-colour LED...

See Details

Half cardioid, Frequency range 30-20,000 Hz, 138 DB SPL max., Switchable Low-Cut 150 Hz, 6dB/octave, UniGuard technology for shielding against RF...

See Details

3-Pin XLR connector, 24 - 48 V Phantom power required, M20 thread

See Details

Combination of Beta 91 and SM 91, Switchable frequency range for bass drums or piano/ voice applications, 11-52 V Phantom power

See Details

Three built-in microphone capsules for 180 degree coverage, Ideal for computer-based phone conferences such as Skype, Built-in speaker with 5 W and...

See Details

Battery compartment in the microphone body, Incl. 150 cm connection cable to 3.5 mm mini jack, battery (LR44) and 6.3 mm jack adapter

See Details

For table and ceiling mounts, XLR connection, M20 screw thread

See Details

Half cardioid, 30 - 20,000 Hz, 133 DB SPL max., Switchable Low-Cut 80 Hz, On/off switch, 18dB/octave, UniGuard technology for shielding against RF...

See Details

With light ring, 3-Pin XLR connector, 24 - 48 V Phantom power required, M20 thread

See Details