Microphones

Especially for the bass drum recording, High boost at 8 KHz for a clean attack, Solid 1.5 m cable with XLR male connector

See Details

Omnidirectional makes precise alignment superfluous, Neodymium magnet for high output level and high signal-to-noise ratio, Optimized frequency...

See Details

3/8" Female thread to 3/8" male thread

See Details

SNR:> 70 dB, Incl. bracket

See Details

3-Way collapsible, Internal cable routing possible, 3/8" Threaded connector, Adjustment via clamp lever, Length adjustable from 1000 to 3220 mm,...

See Details

3m cable with DIN5 connector

See Details

Ideal for overhead, hihat, percussion, acoustic guitar, Nickel plated, Switchable HP (75/ 150 Hz) and pad (-10/ -20 dB), CK 1 capsule, Includes...

See Details

With EW connector for all Sennheiser EW systems and XSW, Medium sensitivity, Frequency range 50-20,000 Hz, Skin-coloured

See Details

Light condenser headset microphone, With two earsets, Left/right adjustable, Size adjustable, Shure TQG plug, Incl. Cable clip

See Details

UHF wireless system with pocket transmitter, 8 Preprogrammed frequency groups, each with 8 available channels, 1 User channel, Adjustable squelch...

See Details

Line-of-sight range of up to 40 m, Digital 24-bit transmission, Robust metal casing, Built-in battery, Automatic or manual frequency selection,...

See Details

USB port for direct operation on the computer, No additional drivers needed, Phantom power via USB Port, External Low Cut and -10 dB Pad Switch,...

See Details

Individually adjustable, Mini jack connector for Sennheiser EW series, Sensitivity 150 dB max.

See Details

With charging contacts, Operation with 2 AA batteries or rechargeable batteries, 10 mW Transmission power

See Details

For XSW1 and XSW2 wireless systems, EW jack socket, Operates with 2x AA batteries

See Details

Cardioid, Detachable 3.0 m phantom power adaptor cable to XLR (MPA V L), Gooseneck with clamp, Incl. W44 wind shield, H 518 angled holder, 3.0 m...

See Details

Ideal for vocals and brass, With a switch, Frequency range 40 – 16,000 Hz, Sensitivity 1.8 mV/Pa (ref. 1 kHz), Impedance 350 Ohm, Dimensions Ø...

See Details

Impedance 350 Ohm, Metal housing, Shock-mounted capsule, Highly consistent directivity, Hum compensating coil, Suitable for vocals and percussion,...

See Details

2x DPA 4060 Lavalier microphones with omnidirectional directional characteristic, 2x DAD 6001 phantom / XLR adapter, 2x BLM 6000 boundary layer...

See Details

With flexible gooseneck and clip for drum edge

See Details

From the BLX series, 4-Pole TQG connection, Requires 2 AA batteries

See Details

Very feedback resistant, Super-cardioid, Tunable HP and HF shelve, XLR, Incl. clamp and storage box

See Details

With integrated Rycote lyre bracket, High pass filter switchable, Level adjustment (-10 dB / +20 dB) switchable, On/Off switch, Charge status LED...

See Details

XLR connector, Mute switch, Illuminated ring, Incl. Windshield (Article 95A16670 on the Shure website) and mounting flange (Article RPM640 on the...

See Details

With XLR connector, Developed for quality sound reinforcement-, professional production- and broadcast applications, Excellent off-axis rejection...

See Details

3 Switchable sound presets, Automatic -10 dB pad, Extra thin diaphragm, C414 Transformer, Bass chamber for powerful basses, 48V Phantom power for...

See Details

With a very slim gooseneck (30.5 cm long), Programmable switch and LED, Integrated preamplifier, Mini capsule changeable (modular), Including...

See Details

Plug to 6.3 mm stereo jack and 3-pin XLR plug

See Details

For TLM102

See Details

3.5 mm EW plug to 3-pin LEMO socket, For using EW pocket transmitters in combination with microphones with 2000/5000 LEMO connector

See Details

UHF Wireless System, With SK 100 G4 bodypack transmitter and Ci1 instrument cable, Includes GA 3 rackmount, Ci1 cable, RJ10 connection cable, NT2...

See Details

12 Selectable channels, Up to 6 systems can be used simultaneously, ASC infrared synchronization of transmitter and receiver, Squelch with pilot...

See Details

For Line6 G55 and VD-V55

See Details

2.4 GHz, Uncompressed transmission between 20-20000 Hz, 128 Bit signal encryption, 120 dB dynamic range, Max. 10 mW output power, Operated with 2 x...

See Details

True diversity, 96 channels in 8 groups of 12 channels each, Frequency scan, Pilot tone, Bright OLED display, Adjustable 6.3 mm headphone output,...

See Details

Only 1 mm thick, Elastic, Breathable, Pleasant wearing comfort

See Details

For LDWS 1000 radio systems, LCD display with channel and group display as well as battery status, Infrared frequency scanning, 2 AA batteries for...

See Details

Suitable for E825/E835/E840, Metal grille with foam insert

See Details

1x Audix D6 bass drum microphones, 1x i5 snare mic, 2x ADX51 overhead and hi-hat microphones, With D-Vice rim clip and microphone case for up to 9...

See Details

For the Stealth Wireless, 2 Single-channel receivers with XLR output

See Details

Optimised for speech applications, Resistant to HF interference due to HF filter, Incl. 3 m XLR cable

See Details

For Apple iPhone/iPad/iPod, Calibrated measurement microphone certified IEC 61672 class 2, For measuring acoustics (frequencies, levels), Can be...

See Details

Omnidirectional, Switchable low cut at 80Hz, Operates with 1.5V AA batteries or 10-52 Volt phantom power, Incl. AT8405a stand clamp, AT8136...

See Details

With Beyerdynamic microphone capsule, Specially designed for interviews recording microphone, The integrated LEA engine guarantees a perfect...

See Details

For studio and reporter applications, 3-Stage MS matrix switchable, Operation with 6V battery or phantom power, 5-Pin XLR output, Includes Y-cable...

See Details

Omnidirectional, Free field, Transformerless output, Electronically balanced

See Details

Cardioid, Detachable 3.0 m phantom power adaptor cable to XLR (MPA V L), Gooseneck with clamp, Incl. W44 wind shield, H 518 angled holder, 3.0 m...

See Details

With two hand-held transmitters ULM300M and receiver ULM300RD, License-free operation in the 2.4 GHz band, Hand-held transmitters have buttons for...

See Details

Exclusively manufactured for Thomann, XLR Male / XLR Female

See Details

For Line6 XDV70 wireless systems, With TA4F mini XLR connector, Wind screen included

See Details

Professional Headset Microphone, Detachable and adjustable neckband for left - right applications, Frequency range 20 - 20,000 Hz, +4-6 dB Presence...

See Details

With SK 100 G4 bodypack transmitter and Ci1 instrument cable, Includes GA 3 rackmount, Ci1 cable, RJ10 connection cable, NT2 power supply unit and...

See Details

For stereo and 2-channel applications, Transmitter and charger are required for use but not included

See Details

Wide cardioid polar pattern, On/Off switch, Stand connector, Classic visual appearance - modern performance, Optimised frequency range for speech...

See Details

Especially suitable for capturing speech, +3 dB Presence boost from 8 - 20 KHz, For wireless transmitters with B+K connector (optional adapter for...

See Details

Cardioid polar pattern, 3-Pin. mini XLR connector (AKG compatible!), Incl. Wind shield, Suitable for all t.bone wireless systems except for the TWS...

See Details

With SK 100 G4 bodypack transmitter and ME 2-II condenser lavalier microphone, Includes GA 3 rackmount, RJ10 connection cable, NT2 power supply and...

See Details

2.4 GHz band, 128-Bit encryption signal, One button pairing, Power supply via microUSB connector or 2x AA batteries, Firmware update via microUSB...

See Details

For small microphones with diameter of 17-22 mm, Elastic, High-quality plastic, 85035.000.55 3/8", Incl. Thread reducers 3/8"- 5/8"

See Details

Especially for double bass, Detachable cable, Improved microphone suspension for even less structure-borne noise, B+K plug, Includes special holder...

See Details

For drums, percussion, wind instruments and guitar amplifiers, Robust metal housing and wire-mesh cap, Incl. microphone bag, microphone clamp/holder

See Details

Large-Diaphragm Dynamic Microphone, Bass roll-off switch, Variable-D design, Weight 1474 g, Incl. clamp and storage box, 3 Year manufacturer's...

See Details

For speaking and singing, Supercardioid

See Details

High feedback security, Very low handling sounds and pop sounds, Gold-coated membrane to protect against corrosion and moisture, Capsule suspended...

See Details

2x Joints, XLR connector for ME34/35/36

See Details

Low noise, Sensitive response with high dynamic range, 48 V DC phantom power, Pad switch -10 dB, Including pop filter, microphone suspension,...

See Details

For Electro Voice RE20/27 or PL10/20, 3/8" and 5/8" stand mount

See Details

Extremely fine aluminium ribbon (1.8 μm), Ribbon frame with locking screw decoupled from the casing as transport protection, Specially designed...

See Details

For powering TG series microphones with 48V phantom power, 4-pin mini XLR male to 3-pin XLR male

See Details

Steel cable, Cable to LEMO (SK 50/250), Straight connection

See Details

With Sennheiser EW connector

See Details

Frequency band 1 (548,100 - 605,900 MHz + 614,100 - 697,900 MHz), Robust metal casing, Up to 50 mW output power, Up to 8 hours battery power,...

See Details

For MEI 1000 system, Headphone output, Operation with 2x AA battery

See Details

Soft-mounted capsule with Dyna-Damp system for low handling noise, 1.6 mV / Pascal

See Details

For studio and live applications, Electrodynamic pressure gradient with active electronics, High output level, 15 dB pad as well as 100 Hz high...

See Details