Microphones

Particularly low-impedance output, Reliable protection against RF interference, Suitable for long cable lengths of up to 100 m

See Details

For cajon or bass drum recording, 11 - 52 V Phantom power required, Robust metal housing, Non-slip rubber base, Red phantom status LED

See Details

For goosenecks MZH 3015/3040

See Details

Dynamic, closed, on-ear, Microphone type BMD 424, Dynamic, Noise-compensating, Hyper-cardioid

See Details

Cable from L plug to phantom adapter, 3 m long

See Details

With 18 slots for TG 16 R and TG 16 T bodypacks, Power supply via included 15 V / 3.3 A adapter, Status LED, Black housing

See Details

For TLM102

See Details

Beta instrument series, With BLX1 pocket transmitter and PGA98H clip microphone, Up to 12 systems simultaneously, Pilot tone,...

See Details

For iPhone, iPod touch (with microphone input) and iPad, Suitable for reporters, podcasters, singers and musicians, Cardioid, 3 Sensitivity levels,...

See Details

Enables spatial recording in the field of live music, voice recordings, video recordings, Operable on line inputs, Like wearing Walkman headphones...

See Details

For Roadboy and Roadman speakers, 863-865 MHz, 16 Switchable channels

See Details

Fits all guitar straps with belt hole adjustment, Comes with extra hook and loop closure for easy attachment and adjustment

See Details

One side with 3/8" inner thread, Other side with 3/8" outer thread

See Details

Suitable for 1 or 2 receivers of the SR45, SR40 Pro, SR40 Pro Flexx, SR470, DSR70DR or SR400 / 420/450, Incl. housing screws

See Details

Single bodypack for Line6 XD-V55 systems, 2.4 GHz, 12 Switchable frequencies, Audio frequency range 10 - 20,000 Hz, Dynamic range 118 dB, Range up...

See Details

For Shure Beta 58 (both wired and wireless model), Normal version, Silver gray with blue ring

See Details

Recording microphone specially developed for interviews, The integrated LEA engine guarantees a perfect recording level without artifacts as with...

See Details

Portable interview set, XSW-D transmitter XLR female, XSW-D receiver 3.5 mm jack, Including hot shoe adapter, spiral cable with 3.5 mm mini jack...

See Details

For XL2 systems, Class 2

See Details

3 Extendable parts, 5 Velcro straps for fixing cables to the boom pole, Rubberized handle at the end, Foam rubber grip 35 cm from the end, 5/8"...

See Details

Bodypack System 10, 2.4 GHz pocket transmitter, 10 mW transmitting power, Operation with 2x 1.5V AA batteries (not included), Fourpin HRS...

See Details

6.3 mm angled plug to lockable 4-pin connector

See Details

2.4 GHz, 12 Switchable frequencies, Range up to 60 meters (depending on environment), 2x Jack outputs for amp and tuner, 1x Mini XLR input on...

See Details

Jack plug fixed directly to the housing, Integrated battery

See Details

Matched Microphone Pair, True condenser microphone with gold sputtered 1/2” capsule, Cardiod characteristic, Very low noise, Requires 48V phantom...

See Details

Capsule module, For K6 System

See Details

Wireless headset with built-in 2.4 GHz transmitter and an ultra-compact receiver, No license is required and no charges are incurred when used...

See Details

Exclusively manufactured for Thomann, XLR Male / XLR Female

See Details

For electric guitar & bass with high-impedance passive pickups, No complicated setup required - just couple the transmitter and receiver for ten...

See Details

2.4 GHz, 12 Switchable frequencies, Range up to 60 meters (depending on environment), 2x Jack outputs for amp and tuner, 1x Mini XLR input on...

See Details

Active Antenna Splitter for the UHF Range from 470 - 865 MHz, Cascadable, With 4-fold voltage distribution, Supplies up to four diversity receivers...

See Details

1x D6 (bass drum), 1x D4 (bass drum/floor tom), 2x D2 (toms), 1x i-5 (snare), 2x ADX51 (overheads/hi-hat), 4x D-Vice (gooseneck rim clamp)

See Details

Cardioid polar pattern, Frequency range 40 - 16,000 Hz, Impedance 350 Ohm, Switch, Weight 330 g, Incl. Clamp and bag, Suited to vocals and percussion

See Details

Condenser Microphone, Cardioid/ hyper cardioid (changeable with PPC), Operates with 48V phantom power or 2x 1.5 V AA battery, Switch with battery...

See Details

Pure aluminum membrane, Instrument recording - especially saxophone, Drum miking (toms, hi-hat), MS stereophony with the M 130, Very good frequency...

See Details

For speaking and music uses, Omnidirectional polar pattern, 50 - 20,000 Hz, 2.7 mV / Pa, -51.2 dB re 1 V / Pa, 125 dB SPL max., 300 Ohm, 3-Pin TQG...

See Details

Hypercardioid, For singing, sheet, overhead, Bass Drum and Percussion, Exceptionally wide frequency response, Extremely low feedback, Humbucking...

See Details

For all Shure handheld transmitters up to BLX and ULX-D Series

See Details

Fitting for the tbone EarmiKe, BodymiKe and HeadmiKe microphones, Set with 5 pieces

See Details

Specially for bass drum and brass instruments, With integrated microphone mount, 20 - 10,000 Hz, 70 Ohm, Super cardioid, 137 dB SPL max

See Details

For up to five UR4, ULXD4, QLXD4, U4D or UC, ULX-SLX and BLX4R receivers, Pre drilled holes for optional antennas on the 19" case, 4x DC out

See Details

Without switch, Incl. clamp and bag, Suitable for e.g. vocals and percussion

See Details

Supercardioid/cardioid switchable, Switchable low-cut, Switchable -10dB pad, Black housing, Frequency response 40 - 20000 Hz, Impedance 50 ohms,...

See Details

XLR connector, Incl. Windshield (Article 95A16670 on the Shure website) and mounting flange (Article RPM640 on the Shure website)

See Details

Ideal for tom and snare recordings, Cardioid, 140 dB max. SPL, Special mount MKV 87 included, XLR output, Neoprene bag included, Successor to the...

See Details

L connector, Operating with AKG bodypack transmitters or with B23L battery power supply (Art. 342666 - not included), Especially for accordion, 1.5...

See Details

From EW connector to XLR, for example, for E 908 B EW, Robust metal chassis, Switchable gain (0/-12dB), Switchable roll-off filter (125 Hz (-3 dB),...

See Details

70 Hz - 16 kHz Frequency range, 150 Ohm output impedance, XLR connector, Cast metal housing, Includes double-sided attachment frame (adhesive) and bag

See Details

Ribbon Microphone, Figure of 8 characteristic, Optional stand mounts (4071B or 4072) are not included!

See Details

For handheld transmitter, pocket transmitter and 19" receiver, 7 mm birch plywood, 22 x 22 mm and 25 x 25 mm aluminium profiles, 4x Drawbolts, 1x...

See Details

Receiver (XLR male) and transmitter (XLR female), Operation with 2 AA batteries (LR6, 1.5 V), Battery power> 6 hours, Up to 50 m range, 16 Channels

See Details

1 s 902 Bass drum microphone, 4 e 904 Tom microphone, 1 e 906 Snare microphone, 2 e 914 Overhead microphone, CC5 case with inlay

See Details

Sennheiser MZH 3015, 3040, 3042, 3-Pin XLR, XLR TTL Logic output at back

See Details

Compatible with Line6 HS70T headset

See Details

With three Rycote double-lyre suspensions and enamelled stainless steel pop protection, For NT1, NT1-A, NT1000, NT2-A, NT2000, NTK, K2

See Details

Optimised for speech applications, Resistant to HF interference due to HF filter, Incl. 3 m XLR cable

See Details

For a variety of instruments, Long gooseneck, Modular design for high flexibility with various available brackets and capsules, Switchable low-cut...

See Details

With antenna diversity, Bodypack transmitter, E908T condenser gooseneck brass instrument microphone with cardioid polar pattern and 147 dB max....

See Details

4 Microdot adapters, 4 Miniature microphone cable heavy duty, 4 Clips for drums, 2 Clips for saxophone / trumpet, 2 Universal clip, 1 Peli Case

See Details

Successor of the K1 Plus, Just the microphone - single, Adjusting bass frequencies through integrated trimpot, Nickel silver staple

See Details

From low to high impedance, With 24 dB signal increase gain, Can also be used in the reverse direction, Balanced 3-pin XLR (f) to 6.3 mm jack plug

See Details

3-Pin mini XLR, For AKG PT pocket transmitters (except PT40), the Samson UT1L and VT2L, and the 4060 miniature microphone

See Details

Compatible with 48 V phantom power, XLR male to XLR female, Robust metal chassis

See Details

One side with 3/8" inner thread, Other side with 3/8" outer thread

See Details

From Sennheiser EW male connector (Hicon HI-J35S-SCREW-M) to AKG 3 pin TQG male (Neutrik RT3 MC-B)

See Details

Gain switch, 3/8" Mic stand flange and BNC connector, For XD-V70

See Details

For EK 300 in-ear receiver G2/G3 and SK G2/G3 transmitter

See Details

Recording microphone specially developed for interviews, The integrated LEA engine guarantees a perfect recording level without artifacts as with...

See Details

Pre-polarised 6mm condenser capsule, Omnidirectional, Max. SPL 140 dB, For 18-52 V phantom power, Suitable for real time analyser, measurements,...

See Details

Modular design for high flexibility with various available brackets and capsules, Switchable low-cut filter at 80 Hz, 200 Ohms, -49 dB (3.5 mV) re...

See Details

With 3/8" inner thread and 3/8" screw thread

See Details

Ideal for choral recordings, Cardiod characteristics, Including a fixed 7.6 m long cable, XLRm plug

See Details

2.4 GHz, 12 Switchable frequencies, Range up to 60 meters (depending on environment), 2x Jack outputs for amp and tuner, 1x Mini XLR input on...

See Details

Matched stereo pair, -10 dB pad, With microphone clamps, In a wooden case, Made in Russia

See Details

2 Pocket transmitters and 2 MH3 condenser headset microphones in the colour beige, 19", 1U true diversity receiver, 96 channels in 8 groups of 12...

See Details