Microphones

Includes a SKM 300 G4-S handheld transmitter with mute button (without capsule), and a EM 300-500 G4 9.5" receiver, 88 MHz Switching bandwidth, 20...

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

Rode M3 (replacement)

See Details

75 mm diameter, Very little effect on the sound of the microphone, Fast installation, Additional protection for microphones against damage,...

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

With SKM 500 G4 handheld transmitter, dynamic E945 replaceable capsule and EM 300-500 G4 9.5" receiver, 72 MHz switching bandwidth, 20 Channel...

See Details

88 MHz Switching bandwidth, 20 Channel banks with up to 32 presets each, Up to 32 compatible channels, Network connection for frequency management...

See Details

For fixed installation of Reference Standard series, XLR male to XLR female

See Details

Cardioid, Rquires 48V phantom power, 3-Pin XLR connector with gold-plated contacts

See Details

Ideal for short, lightweight microphones on the boom arm, Suitable for Schoeps MiniCMIT

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

SM series combo, Dual UHF Wireless-System with 1x BLX1 bodypack, 1x SM58 handheld transmitter and 1x SM35 headset mic, Up to 3 systems...

See Details

Gold-plated capsule with tube, Classic warm sound, 3 Step pad and low-cut, Illuminated buttons, Sturdy metal construction, External control unit...

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

For studio and live applications, 4 Directional characteristics (omnidirectional, cardioid, super cardioid, figure eight), 80 and 120 Hz HP...

See Details

Professional large diaphragm microphone, 1" Large diaphragm microphone, Incl. Elastic spider suspensions, metal case and shaped windshield

See Details

Specially designed for kick drum microphones, Also suitable for picking up bass amplifiers, deep woodwinds and brass instruments etc., Requires 48V...

See Details

For Shure Motiv MV88

See Details

Suitable for the microphone ATM350

See Details

NEUMANN KK 205 condenser capsule (supercardioid) and EM 300-500 G4 9.5" receiver, 88 MHz bandwidth, 20 Frequency banks with up to 32 presets for...

See Details

With PG58 handheld transmitter, PG vocal series, Up to 12 systems simultaneously, Pilot tone, Microprocessor driven antenna-diversity, Quick-Scan...

See Details

2 paired Schoeps CMC 6 microphone pre-amplifier, 2 capsules MK 21, Includes 2 microphone clamps SG20, Includes 2 windshield elements B5D, Comes in...

See Details

Complete set for the Tascam DR-44WL Handheld Recorder, Portable Recorder Suspension (ry-041119), Tascam DR-44WL Mini Windjammer (ry-055463)

See Details

Suitable for EM9900

See Details

Big universal windscreen, Made of acoustic foam, Suitable for directional microphones, Especially for AT897 / AT 4073a / AT835ST

See Details

With patented triangular Ehrlund capsule, Especially suitable for loud signal sources such as drums, amps and wind instruments, Integrated dirt...

See Details

One fur windscreen for cutting and adjusting to size, Especially suitable for film, theater and musical applications, BBI-PAF-GY

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

Matched Pair, Requires 48V phantom power, 3-Pin XLR connector with gold-plated contacts

See Details

Brass screw for the flash shoe (1/4"), 4 Velcro straps for fixing the receiver

See Details

For the microphone ATM350, Magnetic

See Details

2 Paired microphone amplifiers SCHOEPS CMC 6, 2 Microphone clips SG20, 2 Windshields B5D, Elegant wooden case

See Details

Replacement windscreen for Countryman E6 microphones

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

Suitable for Sennheiser E 608

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

With antenna diversity, Set consisting of 2x SKM 835-XSW handheld transmitter with dynamic capsule (cardioid pattern) and 1x EM-XSW1 DUAL desktop...

See Details

With SKM 500 G4 handheld transmitter, dynamic E945 replaceable capsule and EM 300-500 G4 9.5" receiver, 72 MHz switching bandwidth, 20 Channel...

See Details

PG Vocal Series, 2x PG58 Handheld transmitters, Up to 3 systems in parallel, Pilot tone, Microprocessor driven Antenna-Diversity, Quick-Scan...

See Details

Requires 48V phantom power, 3-Pin XLR connector with gold-plated contacts

See Details

Cardioid, 20 Hz - 20 kHz, 120 Max SPL (dB for 0.5% THD), Needs 48V phantom power, -10dB Switch, Incl. Microphone holder, Made in Russia

See Details

Suitable for C568B and C568EB, Made of foam

See Details

Tube condenser microphone, Dual diaphragm, Includes power supply, case and shock mount

See Details

For preventing strong noise due to wind, Suitable for miniature lavalier microphones from 8.0 - 13.0 mm in diameter such as Sanken COS-11 (with the...

See Details

Flexible foam windscreen, Suitable for the most common vocal microphones, 9 Different colours

See Details

Metal clip for BLX 1 pocket transmitter

See Details

Consists of RE520-RC3 microphone head, RE3-HHT hand transmitter and RE3-RX diversity receiver, Works with 2 AA batteries or rechargeable NiMH cells

See Details

Metal hand transmitter with dynamic Beta58 microphone capsule, 120 dB dynamic range, AES-256 encryption for secure transmission, 42 MHz bandwidth,...

See Details

Matched pair, For the Oktava microphone series 012 with cardioid polar pattern

See Details

Condenser, Highly directional, Threaded 1 cm cartridge, Compatible with all Microflex (MX) gooseneck and overhead models, including Microflex...

See Details

Pressure gradient, Incl. 5 m XLR cable (SGMC-5R), 2 elastic mounts (M 961) and windscreen

See Details

1.07 "Gold Vapor Diaphragm (Membrane), 48-42 V phantom power required, Frequency response 20 Hz - 20 kHz (+/- 3dB), 10 dB PAD switch, Sensitivity...

See Details

Suitable for 515, 565, 588, BG 1, BG 2, BG 3, SM 58, beta 58

See Details

PG series combo, 1x BLX1 bodypack, 1x PG58 handheld transmitters, 1x CVL lavalier microphone, Up to 3 systems simultaneously, Pilot tone,...

See Details

With hand selected 1 "capsule, Directional characteristics omnidirectional, cardioid and figure-eight, -15 dB pad, Hi-pass filter 100 Hz with 6dB /...

See Details

24 bit / 48 kHz audio signal, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching bandwidth, 22 compatible channels in an 8 MHz...

See Details

For stands with 3/8" thread, Not recommended for use with boom arms

See Details

Microphone set consisting of 1x SCHOEPS CMC 6 microphone amplifier and 1x MK 22 capsule, Includes 1 x SG20 microphone clip and 1 x B5 windscreen...

See Details

For Audio Technica M32, M33, M35, Made of foam

See Details

For Videomic, NTG-1, NTG-2 (replacement)

See Details

For MKE 2 lavalier microphones, Colour beige

See Details

For Shure CVL lavalier microphones, 1x Foam windscreen

See Details

With 2 notches for 4060, 4061 or 4071

See Details

For 4060

See Details

For camcorders, Suitable for microphones with a diameter of 19 to 25 mm, Suitable for Panasonic DVX series, Sony NXCAM, DSR, HVR, PMW and HDR...

See Details

For lavalier microphones

See Details

For AT803aW, AT829cW, AT831aW, ATM350, PRO35

See Details

A piece of fur windjammer for self-cutting and adjusting, Especially suitable for film, theater and musical applications, BBI PAF BK

See Details

Requires 48V phantom power, 3-Pin XLR connector with gold-plated contacts

See Details

For preventing strong noise due to wind, Suitable for miniature lavalier microphones from 8.0 - 13.0 mm in diameter such as Sanken COS-11 (with the...

See Details

2 pieces angle clamp MZQ 102 (anthracite and gray), 2 pieces microphone clamp MZQ 02 (anthracite and nickel), 2 pieces needle holder ZH 100...

See Details

Flagship of the Blue microphone series, Handmade, Class A amplifier circuit with a hand-selected EF86 tube, The microphone capsules can be changed...

See Details

Pressure gradient transducer with the same large diaphragm capsule of the legendary U 47 and M 49, Max. 8 dBu output voltage, Incl. swivel mount, N...

See Details

For Shure WL 93

See Details

XXX Anniversary Limited Edition, All-Tube Triode Design 12AT7, -10 dB pad switchable, Noise typically -120 dB EIN, Power adapter included

See Details