Microphones

XLR female - XLR male, Neutrik, Made in Germany

See Details

For stage and studio applications, 2x 0.22 mm² (AWG 24), Hicon HI-X3CM - HI-X3CF connector, PVC sheath with 6.4 mm diameter

See Details

Special windscreen for external camera microphones

See Details

For TLM 102, TLM 193

See Details

Silver, With reducer

See Details

Handheld metal transmitter with capacitor Beta87A capsule, 120 dB dynamic range, AES-256 encryption for tap-proof transmission, Up to 72 MHz...

See Details

Revised Softie with greatly improved wind protection properties compared to the Windjammer Longhair, Resistant to dirt and moisture, 3D-Tex...

See Details

Round windshield basket for small diaphragm microphones with a diameter of up to 22 mm, Gray separable basket, Optional windjammer available

See Details

Ry-041126, 10 mm Foam diameter, 360 ° rotatable, Replaceable foam, For tripods with 3/8"thread, Schoeps CMIT - 5U, CMC Series, CMC Series with Cut...

See Details

Suitable for SKM D1, SKM AVX and SL handheld transmitters, Operates on 2x AA batteries

See Details

For ADN-W BA and L1039-10, 100 - 240 V, 12 V / 5 A

See Details

With patented triangular double membrane Ehrlund capsule, Especially suitable for recording, Processes all impedances without affecting the...

See Details

34 mm capsule, Low self-noise, Sensitive response with high dynamic range, Recommended load impedance:> 1000 ohms, Including windscreen, carrying...

See Details

With 1x BLX1 bodypack transmitter, SM Series Combo, 1x SM58 handheld transmitter and 1x WL185 lavalier, Simultaneously up to 3 systems, Pilot tone,...

See Details

MCE 84, 93.94 Anthracite

See Details

-20 dB Pad switch, Low cut, Requires 48 V Phantom power

See Details

For studio and broadcast, Cardioid polar pattern, Max. SPL @ 1 kHz> 122 dB, Offers an extremely musical basic sound, Made in Russia

See Details

Gain switch +10 dB, Attenuation switch-10 dB, Low-noise FET circuit, Capacitors with high resolution, Output transformer hand wound, Requires 48 V...

See Details

XLR female - XLR male, Neutrik connectors NC 3, 15 m, Made in Germany

See Details

For SM10A, Metal clip for the XLR connector

See Details

Turns dynamic wired into wireless microphones

See Details

USB-condenser microphone with modeling-technology, Dual membrane capsule with gold-sputtered membranes, Bus-powered via USB-C, Does not require a...

See Details

1 Fixed frequency, ISM Band, Non-diversity, Max. 2 of devices from the TWS One Series can be operated in parallel with different frequencies (A, B,...

See Details

For SHM 20/21, TG-X45 and Opus 54, as well as DT 284/294, 384/394 and MMX-2

See Details

For Sennheiser E901, Don't waste space with microphone stand, No contact with the bass drum due to the rubber bands, The system isolates all impact...

See Details

With mute switch, E935 replaceable capsule, Dynamic, Frequency transmission via infrared interface, Handheld transmitter with charging contacts for...

See Details

With cardioid capsule, Micrphone preamp devided in 2 pieces with a 3 m long extension cable, Incl. -10 dB pad, In wooden case, Made in Russia

See Details

For Oktava Microphones from the 012 series

See Details

Requires 48V phantom power

See Details

Gain switch +10 dB, Attenuation switch-10 dB, Low-noise FET circuit, Capacitors with high resolution, Output transformer hand wound, Requires 48 V...

See Details

SM58 Handheld transmitter, Up to 12 systems simultaneously, Pilot tone, Microprocessor-controlled internal antenna diversity, Quick-Scan function...

See Details

SM vocal series, 2x SM58 handheld transmitter, Up to 6 systems in parallel, Pilot tone, Microprocessor driven antenna-diversity, Quick-scan...

See Details

Includes a SKM 300 G4-S handheld transmitter with mute button (without capsule), and a EM 300-500 G4 9.5" receiver, 72 MHz Switching bandwidth, 20...

See Details

For studio and stage, Black Neutrik NC3-BAG connector, XLR female straight (NC3MXX-BAG)> XLR male straight (NC3MXX-BAG), 2 x 0.22 mm², PVC jacket...

See Details

Exact microphone alignment by two freely adjustable swivel devices, 5/8" Thread for use with all microphone stands

See Details

Includes microphone mount and wooden box

See Details

With natural sound characteristics and high-level stability, Very good supprression of the ambient noise, Includes Sennheiser adapter for use with...

See Details

Consists of SKM 500 G4 hand-held transmitter, E965 interchangeable capacitor capsule and EM 300-500 G4 9.5" receiver, 72 MHz switching bandwidth,...

See Details

For stage and studio applications, 2x 0.22 mm² (AWG 24), Hicon HI-X3CM - HI-X3CF connector, PVC sheath with 6.4 mm diameter

See Details

XLR male to XLR female (NC3MXX - B and NC3FXX - B), Transparent ring for cable labels, Double shielding

See Details

To suppress strong wind noise, Suitable for miniature lavalier microphones of 3.0 - 4.0 mm diameter such as Sanken COS-11 (without metal...

See Details

With mute switch, E935 replaceable capsule, Dynamic, Frequency transmission via infrared interface, Handheld transmitter with charging contacts for...

See Details

2 Microphone capsules for the Oktava 012 microphone series, Matched pair

See Details

UHF receiver from the XSW2 wireless systems, Diversity with BNC antennas, XLR and jack outputs, NT 12-5CW power supply unit included

See Details

With mute switch, E935 replaceable capsule, Dynamic, Frequency transmission via infrared interface, Handheld transmitter with charging contacts for...

See Details

Modular design, 25 ohms, Extremely low noise, Matt coating, Perfect for studio recordings of organ, grand piano and double bass, Incl. MZQ 8000...

See Details

Gold-coated capsule, Classic warm sound, 4 Low-cut and pre-attenuation settings, Illuminated buttons, Robust metal construction, External control...

See Details

Bass reduction 40 Hz or 100 Hz switchable, Level reduction -6 dB or -12 dB switchable, Navigation switch with LED indicator for directional...

See Details

With Neutrik NC3MX and NC3FX, Sommer cable stage 22 highflex, 2x 0.22 mm²

See Details

500 cm, XLR Female / jack, Neutrik connectors, Red

See Details

Original spare part for MKE 400, Made of foam

See Details

Swiveling microphone clamp for receiving a Neumann miniature microphone, Cable entry with screw cap

See Details

Max. SPL 140 dB, For 18 - 52 V phantom power, Includes 7.5 m connection cable Mini-XLR to XLR male CBL-M25, micro-clamp MC-Micro, adjustable...

See Details

With mute switch, E935 replaceable capsule, Dynamic, Frequency transmission via infrared interface, Handheld transmitter with charging contacts for...

See Details

Universal windjammer, Suitable for a foam windshield with 50 mm diameter and 60 mm length, Suitable for SonyDVR-VX 1000, VX 1000/2000 and other...

See Details

Suitable for DPA lavalier microphones

See Details

True diversity, 184 MHz switching bandwidth 470 - 638 MHz, 6 Channel banks each with up to 59 preset channels, 1 Channel bank with up to 60...

See Details

With mute switch, E935 replaceable capsule, Dynamic, Frequency transmission via infrared interface, Handheld transmitter with charging contacts for...

See Details

Suitable for MX153C, Consisting of 1 metal clip and 3 pieces of foam windscreen

See Details

For DAD6001BC and DAD4099

See Details

For SI 30, 24 V DC

See Details

With antenna diversity, Set consisting of 2x SKM 835-XSW handheld transmitter with dynamic capsule (cardioid) and 1x EM-XSW1 DUAL desktop receiver...

See Details

5 meters

See Details

For Shure KSM large-diaphragm microphones, 3/8" Thread

See Details

Suitable for zoom directional microphones SGH-6 and SSH-6

See Details

Suitable for Sennheiser SL (Speech Line), Passive, Metal housing, Includes 2 rod antennas

See Details

Consisting of 2x compact modular reference standard microphone, Pre-polarized double membrane, 48 volt phantom power, Sensitivity nominal 10 mV /...

See Details

Selected in case with stereo rail and 2x elastic suspension, For studio and live, 4 directional characteristics (omni, cardioid, super cardioid,...

See Details

For stage and studio applications, 2x 0.22 mm² (AWG 24), Hicon HI-X3CM - HI-X3CF connector, PVC sheath with 6.4 mm diameter

See Details

Especially for external camera microphones, RY-055314

See Details

Flexible foam windscreen, Suitable for the most common vocal microphones

See Details

Max. SPL 136 dB, -15 dB Pad switch, High-Pass Switch 80 Hz 6dB / octave, Selected 6J1B tubes, Includes capsules, power supply with connection...

See Details

With 1x BLX1 bodypack transmitter, SM Series Combo, 1x SM58 handheld transmitter and 1x WA302 guitar cable, Only one system in frequency band T11,...

See Details

Beta Vocal Series, Beta58 Handheld transmitter, Up to 12 systems simultaneously, Pilot tone, Microprocessor driven antenna-diversity, Quick-Scan...

See Details

For the ATM350 microphone, Especially suitable for woodwind instruments

See Details