Microphones

90° Recording angle, 9-52 V Phantom power, Includes windscreen

See Details

XLR connector, Incl. Windshield (Article 95A16670 on the Shure website) and mounting flange (Article RPM640 on the Shure website)

See Details

Cardioid, Fixed stand/tripod connector with 3/8" thread, Robust metal housing, Incl. Microphone bag

See Details

Consisting of a preconfigured 5-channel mixer as well as a bass drum and two overhead microphones, Mixer with pre-configured channels for Kick,...

See Details

Closed, Circumaural, Harmonic factor, Dynamic microphone, Single-sided cable (cable not included), Includes wind and pop protection

See Details

Innovative twist joint for microphone arm, Frequency range 10-30,000 Hz, Frequency range 40-12,000 Hz, Nominal impedance 200 Ohms

See Details

Active, Max. SPL (

See Details

Amplifier part for the Oktava capsules of 012 series, Incl. microphone holder (clip), Made in Russia

See Details

18 Frequencies selectable (863/ 865 MHz), OLED display, On/ off switch, AUX in, 4-Pin mini XLR connector for microphone, Incl. antenna, neck cord,...

See Details

16 Channel UHF Wireless System, 9.5" Diversity receiver, Bodypack (line / mic switchable), with 3-pin mini XLR connection (AKG compatible), 16...

See Details

2x Small diaphragm capsules in XY arrangement, ASIO Compatible audio interface (Win/OS-X) with 24 bit and up to 96 kHz, 4x Recording modes, Stereo...

See Details

Suitable for Shure BLX wireless systems and similar models, Suitable for receiver dimensions up to 12.1", Space for one radio receiver, two radio...

See Details

Lateral cable entry

See Details

With recess for all Ovid System microphone mounts and the CC 100 microphone

See Details

For 2x Line6 G55 and VD-V55

See Details

3 Extendable parts, Foam rubber grip 20 cm from the end, 5/8" Threaded connector

See Details

With antenna diversity, Dynamic E835 capsule, 24 MHz bandwidth, 8 Frequency banks with up to 10 presets for each, Integrated antennae, Scan...

See Details

XLR Plug / XLR socket, Metal plug

See Details

Includes pocket transmitter for guitar and bass, 120 dB dynamic range, AES-256 encryption for tap-proof transmission, Up to 72 MHz switching...

See Details

Dual Earset Direct Beige, With the DPA 88 capsule from the 4088 headset, Huge and safe wearing comfort due to self-adjusting ear hook, 100 mm Boom,...

See Details

Condenser Clip Microphone for the Ovid System, Cardioid, 20 - 20,000 Hz, Flexible gooseneck for simple appliance to instrument, 3-Pin mini XLR...

See Details

With Switch, Laminate Varimotion membrane, Elastic suspension of the capsule for minimal handling noise, Black housing, Includes bag and clamp

See Details

With SK 100 G4 bodypack transmitter and ME 4 condenser lavalier microphone, Includes GA 3 rackmount, RJ10 connection cable, power supply NT2 and 2x...

See Details

Consisting of SKM 100 G4-S hand transmitter with mute switch and E835 changeable capsule, ME 2-II condenser lavalier microphone and EM 100 G4 9.5...

See Details

Fits all GLXD / BLX Shure wireless equipment

See Details

Digital wireless microphone system for camera and video applications, Digital PlugON Receiver, SK AVX Bodypack, ME2 Lavalier microphone, Standalone...

See Details

Supercardioid, 10 dB Pad, 48V +/- 4V Phantom power required, 150 Ohms, Balanced fully floating output, Incl. storage case, clamp and MZW41 windscreen

See Details

With hypercardioid directional characteristic, No phantom power required, Pop-screen protection and elastic suspension are already integrated

See Details

Pop filter made of metal, For clamping, With elastic arm

See Details

Incl. microphone clip holder and pocket

See Details

With double diaphragm technology, Minimal proximity effect, axial distortion, Natural recording of the signal for undistorted reproduction, Brushed...

See Details

Disposable stickers, 100 Pieces

See Details

Shock mount set comprising Rycote USM shock mount and InVision Universal pop filter, Compatible with microphones with diameter between 18 - 55 mm...

See Details

For all Shure hand transmitters except BLX and GLX-D series

See Details

With 4-pin Shure TQG connector

See Details

PG Alta Series, For snare, toms, percussion, Cardioid, 50 - 15,000 Hz, 200 Ohm, Metal housing

See Details

Small and lightweight, Integrated TRRS plug for connection to the headset jack, Front-facing or selfie mode audio recording depending on the...

See Details

Switchable 100 Hz low cut, Includes AT8433 clamp, rotary adapter, protective sleeve

See Details

Attenuator and HP switchable, For CK 91 - 98 capsules, 75 Hz Bass cut filter, -10 dB Preattenuation function

See Details

Half omnidirectional, With programmable switch, Status LED, TQG cable to XLR, Exchangeable capsule (modular), Very flat design, Very linear...

See Details

For table and ceiling mounts, XLR connection, M20 screw thread

See Details

For all Superlux microphones with 3-pol. TQG connection, For operation directly on the mixer or stagebox, Operation with 2x 1.5V AA batteries or...

See Details

48V phantom power

See Details

For 1, 2 or 3 receivers of the WMS Mini series to 1 U

See Details

For the AKG WMS420 radio system, Built-in charging contacts for optional CU400 battery (battery not included), 3-Pin mini XLR connector, Crack-free...

See Details

UHF Wireless System, With pocket transmitter, Switchable frequencies in the frequency range M 826 - 831 MHz (duplex gap), Up to 6 systems in...

See Details

For Lectrosonics LM, SM and UM series (suitable for low DC microphones)

See Details

For the box MBA120W, 863 - 865 MHz, With screw thread

See Details

30 cm, For DAM capsules, Phantom adapter, Programmable status LED, With switch, PS3FLock built-in lockable coupling included

See Details

A3 Power supply adapter optionally available (not included)

See Details

For the GoPro HERO3, HERO3 + and HERO4 cameras, Binaural recordings in 3D stereo sound, Powered by GoPro camera (no batteries needed), Open design,...

See Details

Heavy duty version, Suitable for CC 100 RC microphones with screw contact, With 4-pin mini XLR connector for use with Shure wireless systems

See Details

For stage and studio applications, Neutrik NC3FXX-BAG - NC3MXX-BAG connector, PVC sheath with 6.4 mm diameter

See Details

Wireless System for Guitar or Bass, UHF wireless system with pocket transmitter, 8 Preprogrammed frequency groups, each with 8 available channels,...

See Details

2 Condenser headset microphones MH3 in beige, 19" 1U True diversity receiver, 96 Channels in 8 groups a 12 channels, Frequency scan in the...

See Details

Professional Headset Microphone, Detachable neckband, Adjustable for left - right applications, For wireless systems with B+K connectors (optional...

See Details

For high SPL (over 140 dB), Stable housing, Extremely resistant to feedback, For extremely loud stage/monitor applications

See Details

Omni-directional, 1000 Ohms, EW plug, Sweat-resistant, Includes 1x clamp MZQ 02 and windscreen SL MZW

See Details

With SK 100 G4 bodypack transmitter and ME 2-II condenser lavalier microphone, Includes GA 3 rackmount, RJ10 connection cable, NT2 power adapter...

See Details

Made case for Thon Inlay System, Made of 7 mm Birkenmultiplex wood, Coated black, 22 x 22 mm aluminum edging, 2 Drawbolt latches, 1 Handle, 2 Lid...

See Details

With small dimensions for discreet use, 11 - 52 V Phantom, 3-Pin XLR connector (male), Non-glare surface, Length 500 mm, Diameter of the head...

See Details

Condenser Vocal Microphone, Optimised for female voices in rock and pop area, Requires 48V phantom power, XLR connector, Delivery incl. neoprene...

See Details

Supraaural, Open design, Two-sided cable routing, 1V RMS, Noise canceling microphone (90 - 15000 Hz, directional characteristic unidirectional), 2...

See Details

Well suited for picking up guitar amplifiers, Wooden / brass instruments, String instruments, Drum overheads, Broadcast, Voiceover and much more,...

See Details

Cable to LEMO (SK 50/250), Angulated, Copper cable

See Details

UHF Wireless System, SM Guitar Series, BLX1 Bodypack, Up to 7 systems in parallel, Pilot tone, Microprocessor-controlled antenna diversity,...

See Details

From the Perception Wireless series, Operation with one AA battery or battery

See Details

Up to 100 hours operation with 2x 1.5V AA batteries, Extremely low noise, LED for battery and phantom power, On / off switch, XLR output, TQG...

See Details

Provides 18V phantom power, Compact design, Low battery consumption due to microphone connection detection

See Details

Set for the wireless transmission of loudspeaker signals, 2.4 GHz, 4 Loudspeaker terminal connections (2 loudspeakers) for speaker signals at the...

See Details

UHF Wireless System, 9.5" Diversity receiver, Bodypack transmitter (line/mic switchable) with 3-pin mini XLR connection (AKG compatible), 16...

See Details

Wind instruments microphone, 9.5" 1U True Diversity Receiver, 96 Channels in 8 groups a 12 channels, Frequency scan in the receiver, Automatic...

See Details

Vertical array-microphone with Revoluto technology, With preamp and low cut filter, Electret condenser capsules with a pressure gradient operating...

See Details

3/8" Internal thread to 3/8" external thread

See Details

For Line6 XD-V35 systems, 2.4GHz, 6 Switchable frequencies, Frequency response 10 - 20.000 Hz, Dynamic range 118 dB, Range up to 60 meters...

See Details