Displaying 1-26 of 26 products
Extends the FH-2 module by 8 freely assignable CV outputs, Up to 7 FHX-8CV can be connected to one FH-2 for up to 64 CV outputs
Breakout expander for Batumi quadruple LFO module, Allows direct access to the jumper settings of the batumi functions (reset / sync mode and...
Extension for Eucleadian Circles V1 and V2, Provides direct access to all 6 channels for activation / deactivation, Internal connection directly to...
Various operating modes, LED display, 8 or 16 sequencer steps, Controls up to 2x A-155 (2x A-155 are required for 16 sequencer steps), Eurorack format
1x MIDI input and output for compatible modules with breakout header, such as Disting mk4, General CV and FH-2
EOC (end of cycle) pulse outputs, Voltage control of attack and decay (with attenuators) of all four envelopes, 2x Analog or logic outputs are...
For pressure points (item 414541, not included), Clocked sequential binary event machine;, Voltage controlled via direction, run / stop or reset,...
Expands the FH-2 module by 8 programmable clock / trigger / gate outputs, Up to 4 FHX-8GT can be connected to one FH-2
For Black VCO (Art.420020, not included), Extended waveform mixer plus two octaves sub oscillator, Waveform Mixer / Inverter, Sine / triangle...
8-Step Clock Sequencer Module
8 Outputs are switched to the rhythm of the clock divider (A-160), Eurorack format
Supplies 8 digital, random voltages, Eurorack format
CV extension for ES-4, ES-40 or ES-5 module, 8 CV outputs 3.5 mm mini jack DC coupled, 12 bit D / A conversion
Extension module for terminal (Art.381157), Optimised control and direct access to functions of the terminal module, Autotune function for tuning...
Breakout module for A-the 127 (Article Nr 114720)
Additional notch filter for each unit, Separate outputs for low pass, high pass, band pass and notch for each of the 3 filter units, Additional...
Extension for the Mono Lancet for connecting to a modular system
Includes sub-D connection cable and mounting screws, FM VCO2, PWM VCO2, VCF IN, FM VCF, CV IN VCA, 1V / octave CV VCO1 & VCO2, GATE (VCO1 & VCO2),...
Extension for ES-4, ES-40 or ES-5 module, 8 On / off outputs for use as gate, trigger or clock, 8x Output 3.5 mm mini jack DC-coupled
Balanced TRS connectors for the Audio I/O 1U
Extension for ES-4, ES-40 or ES-5 module, 8 MIDI / DINsync outputs, 8 MIDI channels, DINsync wired in pairs - 4 outputs, Status LED display per output
Advanced features for the Black Code Source (not included), Autobend Envelope (Attack and Depth) for authentic chiptune percussion and game sounds,...
Is connected with ribbon cable (included), Resonance knob and input, Cutoff input with attenuator,, Exp. VCO-FM input with attenuator, VCA with...