Controller Modules

Contact microphone and Envelope Follower, Contact microphone integrated in the front plate reacts to Triggers, Rubbing, Vibrations etc., Amplifier...

See Details

Joystick CV controller, Unipolar and bipolar X / Y outputs, 4 Quadrant outputs A-D (0 V - 10 V), 4 Inputs for audio and control signals for use as...

See Details

CV processor for generating harmonic pitch control voltages, 3 Independent quantisation channels, Four-note chord generator, Arpeggiator,...

See Details

Controller module with touch plates that generate a gate signal (gate out) proportional to the pressure intensity and pressure duration, Cascadable...

See Details

Organise and control previously created patterns, 9 Freely configurable outputs for Notes (1 V / Oct), Control voltage (0 - 10 V) and CV signals,...

See Details

Produces variable control voltage when hand is moved around the antenna, Range approx. 30 cm, Euro rack format

See Details

Consists of Doepfer A-198 Module and Ribbon Controller, Further control voltage can be generated via integrated pressure sensor, Eurorack format

See Details

Responds to the vertical position of the finger and the applied pressure, Can be configured in different modes, The selected mode determines which...

See Details

Foot controller connector and dual foot switch connector to provide analogue control voltages (foot controller) and two gate / trigger signals...

See Details

Input / output for X and Y axis with range and offset control, Each axis can work as a bipolar attenuator or DC source, 2 Gate outputs with trigger...

See Details

With two modulation wheels, The factory setting is a spring loaded wheel on the left side with bipolar voltage output (i.e. 0V in the centre...

See Details

For connecting with the Doepfer ribbon controller, Produces a control voltage for the pitch of the oscillators

See Details

32 Chromatic touchplates generate gate, 10 ms trigger, Grade CV (1 V / Oct), Pressure-CV, 2 Bender touch plates with separate output, 8 Additional...

See Details

Module combination outputs the manually generated 1V / octave control voltage and up to 15 different gate and trigger signals, "Send" module...

See Details

Completely made by hand, 3 U Eurorack module, 16 touch-sensitive touch pads including LED, 2 CV / Gate outputs, 2 Tune buttons, 2 trigger inputs (5...

See Details

CV recorder, Records the movement of the action poti to create individual modulation curves, Alternative to classic LFOs, Voltage range -2.5 V to...

See Details