Modular Synthesizers

Analogue voltage controlled oscillator, Cleanly tuneable over a range of 10 octaves, Rotary switch for octave selection and controls for tune and...

See Details

Dual voltage inverter, When applied to the input, the voltage is inverted (for example from 5 V to -5 V inversion) and is available at the output,...

See Details

Dual Multimode Filter, 2x 12 dB Multimode filter with low, high, bandpass and notch settings, Resonance to natural vibration, 2 CV Inputs, 1 CV...

See Details

Compact power supply for small Eurorack systems, Flying Bus Board with slots for 5 modules (40 cm), Integrated passive 2x 3 multiple

See Details

In contrast to the original circuit, the A-101-1 vactrols are used instead of diodes as variable resistors for frequency control, 2 LEDs provide...

See Details

Adds all stereo sums of the connected group and channel modules and their aux returns, Two LED chains form the VU meter, Allows pre-fader listening...

See Details

Connection cable between module and bus (16-pin to 16-pin)

See Details

16-pin to 16-pin

See Details

4-Channel effect pedal interface, Enables the grinding of effects and instruments into a Eurorack system, Wet / Dry control, Gain control for level...

See Details

8 Memory slots with 8 snapshots each, Data Exchange and firmware upgrades via Audio Data Transfer

See Details

MS20 filter clone

See Details

With linear potentiometers (mainly suitable for mixing control voltages), Vintage edition with black front panel

See Details

New filter module in which so-called opto FETs are used to control the filter frequency

See Details

256 Stages BBD

See Details

Consists of a multi-channel noise source and two random sections, The random voltage and clock section features four uncorrelated random CV...

See Details

Standard VCO for the A-100 modular system, Black front panel

See Details

Eurorack format, Voltage controlled low pass filter, similar to Arp 4072, 24 dB/Oct, Controls for frequency and resonance, full/half track,...

See Details

4-Channel audio mixer (1 + 2 and 3 + 4) whose outputs are summed to master output, Each channel can be switched off individually (via switch or...

See Details

One output

See Details

With Make Noise logo

See Details

Consists of a multi-channel noise source and two random sections, The random voltage and clock section features four uncorrelated random CV...

See Details

Voltage controlled 3 + 1 audio mixer, 3 Inputs with volume control and signal LED, CV inputs for inputs A-C and mix output, Fourth channel D is...

See Details

Voltage controlled multimode double filter, modelled on the CS80, 12 dB/Oct, Variable module with extensive tonal possibilities, Adjustable in 2x...

See Details

Consists of a multi-channel noise source and two random sections, The random voltage and clock section features four uncorrelated random CV...

See Details

Interface for balanced line-level (+4 dBu), 1x Eurorack signal path to balanced TRS 6.3 mm jack output path

See Details

Merger module that mixes a MIDI In and a USB A MIDI Input to a MIDI Out and a USB B Output, Additional MIDI Thru, Suitable as extension for Shuttle...

See Details

Completely handmade, 3 U Eurorack module, 8 Potentiometer (0 - 5 V), Sequencing of pitches over potentiometers, Switching of audio signals via CV...

See Details

Does not need +5 V

See Details

Manual adjustment of the filter frequency, 3 CV inputs - CV1 without, CV2, Input level control, Manually adjustable resonance up to self oscillation

See Details

4 TE / 20mm

See Details

For audio signals or control voltages, 3 inputs, 1 output

See Details

For mounting the 12V power supply, With 4 mounting holes for attaching the 12V power supply, With cover

See Details

Triple mode low pass gate

See Details

For older Intellijel 7U cases

See Details

Vintage Edition, For BBD circuits with 2048 stages, For the A-100 modular system, Black front panel

See Details

Binary signal processor with AD / DA converters, Generates and processes analog signals in 8-bit, Suitable for CV and audio processing without...

See Details

8-Channel Trigger to MIDI converter, Converts 8 analog trigger or gate signals to MIDI notes and velocity values (Accent function), Modes for 3-8...

See Details

Performance switcher and router, 4 Inputs and outputs for audio and CV signals, 3-Way toggle switch per channel (pushbutton / off / switch),...

See Details

Analogue mixer, Mixes 7 inputs together to one output, Suitable for adding audio, CV and trigger signals, Low-noise circuit design, A lot of...

See Details

Analogue dual mixer, MAR offers 2 independent mixers in one module, Mixer X with 4 inputs and volume control per channel, Normal (X+) and inverted...

See Details

Combined module of voltage-controlled 8-bit sampler and wavetable oscillator

See Details

Consists of a multi-channel noise source and two random sections, The random voltage and clock section features four uncorrelated random CV...

See Details

MIDI / USB to Clock Interface, Extracts a fixed 1/16 clock and a variable divider clock from a MIDI or USB-MIDI signal, Reset output, MIDI Out /...

See Details

Eight manual or CV controllable switches, Shared output / input (O / I) and two inputs / outputs (I / O1, I / O2) per switch, Functions of inputs...

See Details

Triple mixer for trigger and gate signals, Divided into three independent areas, Area coupling by switch, Simple CV summation

See Details

Trautonium formant filter

See Details

Completely handmade, Inputs for linear and logarithmic frequency modulation, Stable tracking over 5 octaves, Pulse Width Modulation, Hard sync, CV...

See Details

With Make Noise logo

See Details

Merger module that mixes a MIDI In and a USB A MIDI Input to a MIDI Out and a USB B Output, Additional MIDI thru, Suitable as extension for shuttle...

See Details

Analog CV and audio processor for a wide range of tasks, Contains two separate 3-channel Unity Gain mixers, Two attenuators / boosters and two...

See Details

Precision Adder, Module for precise transposition and summation of pitch CV, Inputs A, B and C are summed, Input C can be added and subtracted, SUM...

See Details

Allows four incoming voltages to be added or subtracted from the output signal, Eurorack format

See Details

Compact mixer for CV and audio signals, Can be operated as a dual 3-to-1 or a single 6-to-1 mixer (switchable)

See Details

Analogue low pass filter, Based on the Roland System 100M filter, 24 dB/oct. edge steepness, Adjustable resonance up to self-oscillation,...

See Details

For Doepfer modules, Red colour, Price per unit

See Details

Completely handmade, Contains a classic AY-3-8912 sound chip, 3 U Eurorack module, 2 Rectangular oscillators, Spread knob for tuning oscillators 1...

See Details

3 AC coupled inputs, 3 Buffered outputs, Input and output protection

See Details

Wave slicing oscillator design by MOK as Eurorack module, 2 Completely independent oscillators, Multi-touch screen, 2 High-resolution CV inputs, 20...

See Details

8 Separately configurable outputs as controls or switches, The control range for control voltages (CV) can optionally be set to 10, 5, or 1 V,...

See Details

An active bus access module (BAC) to feed CV and gate into the bus via a jack plug (ex., with several A-100 racks or an external MIDI-CV / gate...

See Details

6.3 mm TS jack interface expander

See Details

S/PDIF converter module with coaxial input and output, Up to 5 modules from the ESX series can be connected (I2S format), Sample rates up to 192...

See Details

2 TE / 10mm

See Details

Variable dual filter, 2 Identical channels based on the classic SEM filter, Fade filter characteristics, Outputs for low, band and high pass,...

See Details

Voltage controlled state variable filter, 12 dB/Oct, Adjustable frequency, resonance, LP-HP, frequency CV1, resonance CV, input and output,...

See Details

To compensate for gaps, For modules from other manufacturers, 1.5 HP, 5 mm

See Details

Developed and handmade in Germany., Analog oscillator with extended sound possibilities, Top octave with triangle, sawtooth and rectangle, Pulse...

See Details

4-Channel multi-function module, Each channel can be used as manual attenuator or as an inverter, Without signal an adjustable voltage is present...

See Details

Consists of a multi-channel noise source and two random sections, The random voltage and clock section features four uncorrelated random CV...

See Details

Consists of a multi-channel noise source and two random sections, The random voltage and clock section features four uncorrelated random CV...

See Details

Vintage edition with black front panel, Voltage-controlled 24 dB low-pass filter, Black front panel

See Details

Voltage-controlled high-pass filter, Resonance voltage controllable, Level control for input signal

See Details

16-In / 16-out USB audio interface, Link for the integration of modular systems, MIDI equipment and computers, DC-coupled inputs and outputs for...

See Details

Digital stereo oscillator, Uses novel polygonal synthesis, Based on the complex two-dimensional amplitude shaping of sine waves, 2 Internal...

See Details

Controls up to 4 CV synthesizers individually or as a polysynth, Unison voices, 4 CV outputs, 4 gate outputs, Accent, Global Gate and Clock inputs,...

See Details