Tools 4 Winds Straight Tenor Trombone (Mah.)

• With this ratchet piston spreader, the steel pads remain parallel so you can easily press back single-piston, double-piston and four-piston brake calipers. Piston binding is less likely because they remain parallel and push directly back into the caliper bore.
• Item location: , GB

See details on Ebay

• Pagid have created a range of tools for every job you may be doing on your brake system. Clutch & Flywheel. Brake ABS Components. Any claims after 24 hours will be dismissed for a claim. Air Con & Cooling.
• Item location: TAMWORTH, GB

See details on Ebay

• • Master set of adaptors suit a wide range of vehicle applications. • Air operated wind-back tool suitable for left or right hand wind-back operations. • Suitable for push-back and wind-back brake pistons.
• Item location: PONTEFRACT, GB

See details on Ebay

• With its flexible jaws that can be easily opened and closed with the plunger at the end of the tool you can finally take the hassle out of watch winding. 1 Watch Crown Winder Tool. Tired of the hassle of winding a watch?.
• Item location: , GB

See details on Ebay

• This bearing puller is simple to use. As well as the puller you will need a 13mm spanner (or one of our T-bar handles) and a 6mm allen key. WIND-OUT BEARING PULLER FOR BICYCLES. This tool is ideal when removing a single bearing that can be reached from both sides.
• Item location: WESTHILL, GB

See details on Ebay

• Includes left and right-handed thrust bolt assemblies, reaction plate, hex bits and adaptors and includes the three-pin VAG adaptor. Suitable for push-back and wind-back brake pistons. Supplied in carry-case.
• Item location: RADSTOCK, GB

See details on Ebay

• This brake rewind tool from Laser Tools features an adjustable adaptor that will fit pistons with a pin distance between 20 - 35mm - this covers many popular vehicle applications. The rewind tool is of a compact design and will fit smaller calipers like the Mini for example.
• Item location: SUTTON-IN-ASHFIELD, GB

See details on Ebay

• It should be a tight fit to avoid both slipping and wear whilst winding. These are an extra long shaft clock key 2" or 50mm shaft. NEW TOP QUALITY BRASS CLOCK KEY. from 1.75mm to 6.75mm.
• Item location: DISS, GB

See details on Ebay

• This item is not a toy.
• Item location: BARNSLEY, GB

See details on Ebay

• VW: Golf 3, Golf 4, Golf 5, Lupo, New Beetle,Passat, Polo, Sharan, Touareg, Touran, Transporter T4, T5, Quattro. MUST HAVE tool in every busy garage. Their engineers and economists in Taipei, Taiwan work hard to invent and introduce the best products not only in quality but also in price.
• Item location: , GB

See details on Ebay

• No tightening required: If using this new hook on a ceiling or wall. 1/2/5 x Adhesive Ceiling Hook. Sturdy and Durable: No drilling required hooks are suitable for walls and ceilings. Good for renters: Landlords don’t allow tenants to drill holes in walls.
• Item location: , GB

See details on Ebay

• French Type Nickelled Steel Clock Key. It should be a tight fit to avoid both slipping and wear whilst winding. Sizes from 2.00mm to 6.0mm (No.00 - No.15).
• Item location: DISS, GB

See details on Ebay

• Clock Key Winding Winged Type Brass 1.75mm - 6.75mm Mantle Bracket Clocks Tool. It should be a tight fit to avoid both slipping and wear while winding. Brass Winding Clock Key. Antique style key with Square Hole.
• Item location: DISS, GB

See details on Ebay

• The scissor jack, with tooth gears, canextend from 110mm(close position) to 390mm, more than enough to lift most vehicles. Easy to operate using theWrench speed handle. Scissor jack 1. In case of a manual transmission, move gear selector into reverse position.
• Item location: , GB

See details on Ebay

• 1 Watch Crown Winder Tool. With its flexible jaws that can be easily opened and closed with the plunger at the end of the tool you can finally take the hassle out of watch winding. Tired of the hassle of winding a watch?.
• Item location: , GB

See details on Ebay