The Royer Labs R-121 MP is a Matched Microphone Pair with a Extremely low noise, Ribbon element insensitive to heat and moisture, Ideal for guitars, wind...
Read full description
See specifications
Any purchases made through our eBay or Amazon links may result in this site receiving a commission as an active participant in their affiliate programs.
Name | SE Electronics VR1 Voodoo Bundle | Golden Age Project R1 Tube active | the t.bone RB 500 Bundle | Oktava ML 52-02 Shock Mount Bundle | SE Electronics X1R Isolation Bundle | MXL R77 | SE Electronics VR2 Voodoo Bundle | Sontronics Apollo 2 | Sontronics Sigma 2 | Avantone CR-14 |
Brand | ||||||||||
Description | SE Electronics VR1 Voodoo | Ribbon Microphone | Presonus TubePre V2 | Oktava ML 52-02 | SE Electronics X1R | Ribbon Microphone | SE Electronics VR2 Voodoo | Active stereo ribbon microphone | Active ribbon microphone | Ribbon Microphone |
Frequency range | 20 Hz-18 kHz | 30 - 18000 Hz +/- 3 dB | - | 20 - 20000 Hz | - | - | 20 Hz-18 kHz | - | - | - |
Sensitivity | 1.6mV/Pa (- 56 ± 1.5 dB) | -40 dB (0 dB=1V/Pa) @ 1 kHz | - | - | -55.3 dB 1V / Pa / - dB | 1.7 mV / Pa | 10mV/Pa (- 40 +/- 1.5 dB) | 18 mV/Pa -33 dB ± 1 dB (0 dB = 1 V/Pa @ 1,000 Hz) | 18 mV/Pa -33 dB ± 1.5 dB (0 dB = 1 V/Pa @ 1.000 Hz) | -52 dBv / - 2 dB Re. |
Impedance | - | - | - | 200 Ohm | - | 200 Ohms | 150 Ohms | - | ||
Equivalent signal to noise ratio | 10dB(A) | - | - | - | - | - | 20dB(A) | - | - | - |
Maximum SPL at 0.5% THD@1000Hz | 135 dB | - | - | - | - | - | 135 dB | - | - | - |
Connector | 3-pin | - | - | - | - | - | 3-pin | - | - | - |
Shockmount included | ||||||||||
Directional characteristic | - | Figure 8 | - | Figure 8 | - | - | - | - | - | - |
Dimensions | - | 69 x 185 mm | - | - | - | 65 x 180 mm | - | 260 x 65 x 65 mm | 164 x 50 x 32 mm | 37 x 175 mm |
Weight | - | 1.5 kg | - | - | 0.5 kg | 860 g | - | 744 g (1247 g with shock mount) | 421 g (841 g with shock mount) | - |
Frequency response | - | - | - | - | 20-16000 Hz / - 1 dB | - | - | 20 - 18,000 Hz | 20 - 15,000 Hz | 30 Hz - 15 kHz / - 3 dB |
Connection | - | - | - | - | 3-pin | XLR 3-pol | - | - | - | - |
Directivity | - | - | - | - | - | Figure 8 | - | - | - | Figure 8 |
Polar pattern | - | - | - | - | - | - | - | Figure-8 (2x) | Figure-8 | - |
Inherent-noise | - | - | - | - | - | - | - | 10 dB (A-weighted) | 10 dB (A-weighted) | - |
Power supply | - | - | - | - | - | - | - | 48 V phantom power | 48 V phantom power | - |
Royer R-10 vs R-121 Quick Comparison Demo Video by Shawn Tubbs
Royer R-121 Ribbon Microphone | Reverb Demo Video
Royer Labs - A Factory Tour of the Ribbon Microphone Manufacturer
Royer R-10 Ribbon Mic Review & Giveaway - Warren Huart: Produce Like A Pro
Royer Labs R-Series Ribbon Transducer Explained
Get to know the Royer R-10 ribbon microphone
Royer R-10 and R-121 Microphone Shootout
Royer R-10 Ribbon Mic: Demo & Giveaway - Warren Huart: Produce Like A Pro
Royer 101 and Royer 121 Comparison Demo at Sound Pure Studios
The Royer Labs R-121 MP is a Matched Microphone Pair with a Extremely low noise, Ribbon element insensitive to heat and moisture, Ideal for guitars, wind instruments, overheads and strings & Incl. Wooden case and protective cover. The retail price is 2444.09 £. Buy Royer Labs R-121 MP at Thomann UK.
Directional characteristics | Figure 8 |
---|---|
Transmission range | 30 Hz - 15 kHz / - 3 dB |
Sensitivity | -54 dBv re. 1 V / pa / - 1 dB |
Output Impedance | 300 Ohm @ 1 k (nominal) |
Maximum sound pressure | >135 dB |
Length | 158 mm |
Diameter | 25 mm |
Weight | 245 g |
Colour | Nickel |
Shockmount included | No |
SE Electronics VR1 Voodoo Bundle
SE Electronics VR1 Voodoo
Golden Age Project R1 Tube active
Ribbon Microphone
the t.bone RB 500 Bundle
Presonus TubePre V2
Oktava ML 52-02 Shock Mount Bundle
Oktava ML 52-02
SE Electronics X1R Isolation Bundle
SE Electronics X1R
MXL R77
Ribbon Microphone
SE Electronics VR2 Voodoo Bundle
SE Electronics VR2 Voodoo
Sontronics Apollo 2
Active stereo ribbon microphone
Sontronics Sigma 2
Active ribbon microphone
Avantone CR-14
Ribbon Microphone