The Radial Engineering Tonebone Headload V4 is a Load Box / Attenuator for Amplifiers with a Max. 120 watts, Allows an amplifier to saturate at a lower...
Read full description
See specifications
Any purchases made through our eBay or Amazon links may result in this site receiving a commission as an active participant in their affiliate programs.
Name | Koch Amps LB120-II/4 | Radial Engineering Tonebone Headload V4 | Koch Amps LB120-II/8 | Fryette Power Load | Tone King Ironman II Mini Attenuator | Tube Amp Doctor Silencer 8 Ohms Black | Rivera RockCrusher Recording | Two Notes Torpedo Reload | Palmer PDI-06-16 Ohm | Rivera RockCrusher Gold |
Brand | ||||||||||
Description | Load Box / Attenuator for Amplifiers | Loadbox II | Silent DI box | Mini Attenuator | Power attenuator | Attenuator and Load Box for Tube Amps | Attenuator/ Loadbox/ Loudspeaker Simulator | Load Box | Attenuator | |
Impedance | 4 | 4 | 8 | 4, 8, 16 | 8 | 8 | 8, 16 | 4 - 16 | 16 | 8, 16 |
Noise Supression | ||||||||||
DI Interface | ||||||||||
Speaker Simulation | ||||||||||
Dummy Load (usable without cabinet) | ||||||||||
Weight | - | 3630 g | - | 2100 g | 1.36 kg | - | - | 4 kg | - | - |
Dimensions (W x D x H) | - | - | - | 220 x 160 x 80 mm | 191 x 203 x 76 mm | - | - | 304 x 184 x 89 mm | - | - |
Any purchases made through our eBay or Amazon links may result in this site receiving a commission as an active participant in their affiliate programs.
Radial Engineering Headload Prodigy - NAMM 2015
Michael Thompson and the Radial Headload
Radial Headload Review
Radial Headload Guitar Amp Load Box Demo - Sweetwater at Winter NAMM 2014
NAMM 2018 | Radial Engineering
L&M @ NAMM 2018: Radial Engineering
Radial Engineering Headlight Pro - NAMM 2016
Radial Engineering Guitar Pedals Overview
Guitar Tone: Home recording with the JDX Direct-Drive ToneBone
The Radial Engineering Tonebone Headload V4 is a Load Box / Attenuator for Amplifiers with a Max. 120 watts, Allows an amplifier to saturate at a lower output level, For use between Amphead and Cabinet or Amphead and Mixer, Amp / Speaker Load Section Control for Range, Load 5-way rotary control for selecting the speaker load, Lo Resonance switch, Hi Resonance switch, JDX balanced output controller for low and high, Speaker Cab 6-way rotary control for selecting speaker voicings, Phazer slider for Shift, Phazer On switch to bypass the Phazer circuit, 180 ° / 360 ° switch, Front-side 6.3 mm headphone stereo output, Separate level control for headphone output, 6.3 mm mono jack input (from the amplifier), 2 x 6.3 mm mono jack outputs (to the cabinet), Unbalanced 6.3 mm mono-jack Pre-JDX output, Unbalanced 6.3 mm mono jack Post-JDX output, Balanced XLR post-EQ PA output, Balanced XLR Post-EQ / Mon output, Back phase invert switch, Rear ground lift switch for both balanced outputs, Back level control for the unbalanced outputs & Made in Canada. The retail price is 758.83 £. Buy Radial Engineering Tonebone Headload V4 at Thomann UK.
Impedance | 4 |
---|---|
Dimensions (L x W x H) | 154 x 305 x 88 mm |
Weight | 3630 g |
Noise Supression | Yes |
DI Interface | Yes |
Speaker Simulation | Yes |
Dummy Load (usable without cabinet) | Yes |
Koch Amps LB120-II/4
Radial Engineering Tonebone Headload V4
Load Box / Attenuator for Amplifiers
Koch Amps LB120-II/8
Loadbox II
Fryette Power Load
Silent DI box
Tone King Ironman II Mini Attenuator
Mini Attenuator
Tube Amp Doctor Silencer 8 Ohms Black
Power attenuator
Rivera RockCrusher Recording
Attenuator and Load Box for Tube Amps
Two Notes Torpedo Reload
Attenuator/ Loadbox/ Loudspeaker Simulator
Palmer PDI-06-16 Ohm
Load Box
Rivera RockCrusher Gold
Attenuator