Enttec PLink Injector 12-24V

2 ratings | Read reviews

Signal Converter

The Enttec PLink Injector 12-24V is a Signal Converter with a The PLink Injector converts PLink data from your Pixelator or Pixelator Mini so you can easily...

Read full description

See specifications

Any purchases made through our eBay or Amazon links may result in this site receiving a commission as an active participant in their affiliate programs.

PRODUCT COMPARISON

Name Enttec Triton 24V 300WKapegoLED LED Flex Stripe 2700K 5m 24VEnttec Triton 12V 260WKapegoLED LED Flex Stripe Pink 5m 12VKapegoLED LED Flex Stripe Blue 5m 12VEnttec PSAT PS1 5VEnttec PSAT PS1 12VKapegoLED LED Flex Stripe Red 5m 12VKapegoLED LED Mixit Set RF 4m WWKapegoLED LED Flex Stripe Green 5m 12V
Brand
Description LED Pixel Driver with Built-In Power SupplyMonochrome 5 M LED StripLED Pixel Driver with Built-In Power SupplyMonochrome 5 m LED stripMonochrome 5 M LED StripLED Pixel Driver with Built-in Power SupplyLED Pixel Driver with Built-in Power SupplyMonochrome 5 M LED StripWarm White LED Strip SetMonochrome 5 M LED Strip
Compatible with LED pixel products with the following protocolsWS2811, WS2812, WS2812B, WS2813, SK6812, TM1804, TM1812, TM1814, UCS2903, UCS2904, APA-104, 9PDOT (8 -16bit)-WS2811, WS2812, WS2812B, WS2813, SK6812, TM1804, TM1812, TM1814, UCS2903, UCS2904, APA-104, 9PDOT (8 -16bit)-------
EtherNet (ArtNet) connection2x RJ 45 female-2x RJ 45 female-------
Pixel connector2x XLR 3-pin female-2x XLR 3-pin female-------
Power supply90 - 264 V 47-63 Hz-90 - 264 V 47-63 Hz-------
Maximum power consumption2x 150 W-2x 130 W-------
Protection classIP20-IP20-----IP20-
Dimensions (L x W x H)33.5 x 12.9 x 4.3 cm-33.5 x 12.9 x 4.3 cm-------
Weight2 kg-2 kg-----0.44 kg-
Construction TypePower Supply & ControllerStripePower Supply & ControllerStripeStripePower Supply & ControllerPower Supply & ControllerStripeComplete SetStripe
Colour mixingRGBWWWRGBWUVBlueRGBWRGBWRedWWGreen
Colour temperature-2700 K------2700 K-
Light colour-Warm white-PinkBlue--RedWarm whiteGreen
Nominal lumens-5700 Lm--350 lm--330 Lm-1600 Lm
LED type-SMD-SMDSMD--SMD-SMD
Number of LEDs-1200--600--600-600
Beam angle-120°-120°120°--120°120 °120°
Length-5000 mm-5000 mm5000 mm--5000 mm-5000 mm
Width-10 mm-8 mm8 mm--8 mm8 mm8 mm
Height-3 mm-3 mm3 mm--3 mm-3 mm
Cuttable every-25 mm / 6 LED--25 mm / 3 LED--25 mm / 3 LED-25 mm / 3 LED
Input voltage-24 V DC-12 V DC12 V DC--12 V DC220 - 240 V AC 50/60 Hz12 V DC
Power consumption-90 W-40 W36 W--40 W34 W36 W
IP Rating-IP20--IP20--IP20-IP20
Control-Dimmable via optional controller (not included)-Dimmable via optional controller (not included)Dimmable via optional controller (not included)--Dimmable via optional controller (not included)-Dimmable via optional controller (not included)
Length [m]-5 m-5 m5 m--5 m4 m5 m
Luminous flux---800 lm----1870 lm-
LED number---600----480-
Output voltage-----5 V12 V---
Max. output power-----55 W65 W---
Max. current output-----10 A5 A---
Data input-----PLinkPLink---
Output protocols-----WS2811, WS2812, WS2812B, WS2813, SK6812, TM1804, TM1812, APA-104, 9PDOT (8-16 bit)WS2811, WS2812, WS2812B, WS2813, SK6812, TM1804, TM1812, APA-104, 9PDOT (8-16 bit)---
Max. pixel output (RGBW)-----256256---
Max. pixel output (RGB)-----340340---
DMX channels-----10241024---
Protection-----IP20IP20---
Dimensions-----124 x 44 mm124 x 44 mm---

Youtube Videos

What is PLink data?

PL+S 2019 | Enttec 8PX60-12-B

Enttec DMX Pro Software Demo

Démo Light Pixel Bar

S-PLAY: INTERFACE + SETUP ~ DMX Ethernet lighting show smart player/recorder

Easy LED pixel control using TouchOSC

Enttec D-Pro lighting controller software - Overview

Enttec DMX USB Pro vs Enttec Open

Ep.11 What is Multi-Single Power? Learn how to create an efficient LED strip setup

Description

The Enttec PLink Injector 12-24V is a Signal Converter with a The PLink Injector converts PLink data from your Pixelator or Pixelator Mini so you can easily control 12-24V pixel tape or 12-24V pixel dots from a distance & Each PLink port can control up to 340 single RGB pixels (2 DMX universes). The retail price is 36.66 £. Buy Enttec PLink Injector 12-24V at Thomann UK.

Specifications

Input voltage12-24 V DC
Maximum total output power130 W
Maximum output current per pin (binding post)10 A
Construction TypeController
Colour mixingRGB

More LED Strips

Enttec Triton 24V 300W

LED Pixel Driver with Built-In Power Supply

KapegoLED LED Flex Stripe 2700K 5m 24V

Monochrome 5 M LED Strip

Enttec Triton 12V 260W

LED Pixel Driver with Built-In Power Supply

KapegoLED LED Flex Stripe Pink 5m 12V

Monochrome 5 m LED strip

KapegoLED LED Flex Stripe Blue 5m 12V

Monochrome 5 M LED Strip

Enttec PSAT PS1 5V

LED Pixel Driver with Built-in Power Supply

Enttec PSAT PS1 12V

LED Pixel Driver with Built-in Power Supply

KapegoLED LED Flex Stripe Red 5m 12V

Monochrome 5 M LED Strip

KapegoLED LED Mixit Set RF 4m WW

Warm White LED Strip Set

KapegoLED LED Flex Stripe Green 5m 12V

Monochrome 5 M LED Strip