Emerson Custom CTS 250K 9,5 P/P Split Pot

12 ratings | Read reviews

250 Kohm Push/pull Guitar Poti

The Emerson Custom CTS 250K 9,5 P/P Split Pot is a 250 Kohm Push/pull Guitar Poti with a Designed to provide optimal performance and sound, Each poti is...

Read full description

See specifications

Any purchases made through our eBay or Amazon links may result in this site receiving a commission as an active participant in their affiliate programs.

PRODUCT COMPARISON

Name Allparts Semi-Hollow Wiring KitEvh Custom High Friction 250 PotiSeymour Duncan Liberator Solderless 250KShadow SH124-250 Kill PotFishman Fluence Standard PotEvh Custom Low Friction 250 PotiGöldo Push/Pull Pot 500KO SC A-logGibson Poti 300kO Linear Taper ShortEMG 25K Split Tone (Solderless)EMG 25K Push/Pull Pot LS (Solderl)
Brand
Description Wiring Kit for Semi-Hollow Electric GuitarPotentiometerPotentiometerPotentiometerPotentiometers for guitar and bassOriginal potentiometer for Wolfgang GuitarsPush/Pull PotentiometerPotentiometerTone Potentiometer25kOhm Push/Pull Potentiometer
DesignNormal-SolderlessKillswitchPush Pull-Push PullVolumeToneVolume
Resistance Value500 kOhms250 kOhms250 kOhms250 kOhms25 kOhms250 kOhms500 kOhms300 kOhms25 kOhms25 kOhms
Characteristic CurveLogarithmic--Logarithmic--LogarithmicLinearLinearLogarithmic
Shaft (Length)9,5 mm---9,5 mm-20,0 mm---
Tandem Poti
Push/Push KillswitchPush/Pull Push/Pull Push/Pull
Solderless
Shaft typeGroovedSmoothGroovedGroovedGroovedSmoothGroovedGroovedGroovedGrooved
Resistance----25 kOhm-500 kOhm (A-log.)300 kOhm linear--

Discover Great Deals on Emerson Custom CTS 250K 9,5 P/P Split Pot

Any purchases made through our eBay or Amazon links may result in this site receiving a commission as an active participant in their affiliate programs.

Emerson Custom Cts A500K 500K Audio Logarithmic Split shaft Potentiometer
  • 500K's Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's, Jazzmasters and many other models of guitars, but can be used on any Guitar that requires a 500K Split shaft Potentiometer. We Spec these pots to be over the stated value rather than under. With tolerances you can get a -/+ swing of quite a bit, so we've chosen to aim for a Little over, so that the actual end value is closer to our target Range . CTS split shaft pots are made to fit USA Spec 24 spline push-on knobs. Import Guitars will need new USA Spec Knobs. We recommend that you slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to PUSHshaft by exerting too much downward pressure. Each CTS pot includes a flat washer, lock washer, and 1 hex mounting nuts for Cus.
  • Item location: Madrid, ES
Emerson Custom Cts A250K 250K Audio Logarithmic Split shaft Potentiometer
  • 500K's Typically used on SG's, Flat Top Non Carved Top Les Pauls, PRS's, LP Jr's, Jazzmasters and many other models of guitars, but can be used on any Guitar that requires a 500K Split shaft Potentiometer. We Spec these pots to be over the stated value rather than under. With tolerances you can get a -/+ swing of quite a bit, so we've chosen to aim for a Little over, so that the actual end value is closer to our target Range . CTS split shaft pots are made to fit USA Spec 24 spline push-on knobs. Import Guitars will need new USA Spec Knobs. We recommend that you slightly crimp together the top of the potentiometers shaft ever so slightly so that when you go to PUSHshaft by exerting too much downward pressure. Each CTS pot includes a flat washer, lock washer, and 1 hex mounting nuts for Cus.
  • Item location: Madrid, ES

Youtube Videos

Emerson Custom Guitar Electronics Review by Sweetwater

Guitar volume pot listening test 500k vs 250k on Humbucker and Single Coils

How to Wire CTS Push Pull Pots

Guitar capacitor tester: let your ears decide

Bourns Push-Pull Switch Guitar Application

How To Wire a Strat with a Blend Control

Precision Bass Wiring - How to Wire a Precision Bass

Testing Guitar Electronics - testing pots, capacitors and the continuity test

Replacing Crackly Pots Part 1

Description

The Emerson Custom CTS 250K 9,5 P/P Split Pot is a 250 Kohm Push/pull Guitar Poti with a Designed to provide optimal performance and sound, Each poti is individually tested and has a durable brass shaft and thread, Low rotational resistance for faster and easier control, Especially tight ± 8% resistance tolerance & Specially developed logarithmic resistance curve allows a very smooth and uniform control over the entire path. The retail price is 10.75 £. Buy Emerson Custom CTS 250K 9,5 P/P Split Pot at Thomann UK.

Specifications

Resistance profileLogarithmic
ShaftKnurled
Shaft length9.5 mm (0.38")
Thread diameter (hole)9.5 mm (0.38")
DesignAudio Taper
Resistance Value250 kOhms
Characteristic CurveLogarithmic
Shaft (Length)9,5 mm
Tandem PotiNo
Push/PushNo
SolderlessNo
Shaft typeGrooved

More Guitar/Bass Poten­tiometers

Allparts Semi-Hollow Wiring Kit

Wiring Kit for Semi-Hollow Electric Guitar

Evh Custom High Friction 250 Poti

Potentiometer

Seymour Duncan Liberator Solderless 250K

Potentiometer

Shadow SH124-250 Kill Pot

Potentiometer

Fishman Fluence Standard Pot

Potentiometers for guitar and bass

Evh Custom Low Friction 250 Poti

Original potentiometer for Wolfgang Guitars

Göldo Push/Pull Pot 500KO SC A-log

Push/Pull Potentiometer

Gibson Poti 300kO Linear Taper Short

Potentiometer

EMG 25K Split Tone (Solderless)

Tone Potentiometer

EMG 25K Push/Pull Pot LS (Solderl)

25kOhm Push/Pull Potentiometer