Tremolo Systems

For 7-string guitars, Double locking design, Fine tuners, Lockable vibrato arm, Includes R7S nut 49 mm, string retainer, mounting studs

See Details

For each and original series

See Details

For American Stratocaster - also suitable for American Standard Strat and Malmsteen Upgrade

See Details

For American Stratocaster - also suitable for American Standard Strat and Malmsteen Upgrade

See Details

Ground plate and all parts made from high-quality, hardened, precision cast steel, Hardened knife edges, Complete with R2 nut, String retainer,...

See Details

FL FRO - SLS B, For Floyd Rose original vibrato, @Pack of 6

See Details

Teflon coating prevents friction, Normal spring tension possible, Set of 3 springs

See Details

54 mm Spacing, Made by Gotoh

See Details

For mounting on flat tops, No routing necessary, Replaces Tune-O-Matic bridge and tailpiece, Complete mounting kit including bridge and locking nut

See Details

Can be mounted on the fretboard both from below (neck through) and from above, Prepared to be installed without further processing with wood or...

See Details

Base plate and all parts made from high-quality, hardened, precision cast steel, Hardened knife edges, Complete with R2 locking nut, string...

See Details

For American Stratocaster - also suitable for American Standard Strat and Malmsteen Upgrade

See Details

With "zinc - block", Chrome TV10S, As the old original, Curved tab, With bowed strings through holes, Complete with arm, springs, spring claw and...

See Details

Retrofit tremolo bridge for ST-Style, Simple installation without modifications to the instrument, Dive-Only Design, Up to 15° tilt more than...

See Details

Retrofit tremolo with bridge for ST style, Easy installation without modifications to the instrument, Dive-only design, Up to 15° more tilt than...

See Details

Licensed Floyd Rose tremolo, Hardened knife edges and nut made of forged steel, Guarantees an extremely long sustain, With springs, tremolo arm and...

See Details

For most Floyd Rose-style tremolos, Set of 6 pieces

See Details

For ST style models, Knife edge Tremolo, Insertable tremolo arm, Steel saddles, Includes tremolo arm, stamped steel base plate, springs, spring...

See Details

Original Floyd Rose Vibrato with patented double-locking design, Flatter version than the Original Series, 2-Point knife edge system, Locking nut...

See Details

Suitable for Fender Squier Classic Vibe, American Special Stratocaster, Highway One and various Mexico models, Right-angled

See Details

With zinc block, Identical to the original, Curved tab, With bowed strings through holes

See Details

ST-Style, 2-Hole mounting, Steel saddle, Zinc Block, Includes screws and springs

See Details

Mounting for J-guar and J-master tremolos, String retainer for mounting on the original tremolo, Reduces string buzz on the bridge and prevents the...

See Details

The baseplate is made of hardened steel and the solid spring block guarantees sustain, Roller bridge saddles fix the strings in position, 37 mm...

See Details

For 'EDGE' Tremolos, Priced per unit

See Details

For guitars with 56.4 mm (2-7 / 32 ") string spacing, 6-Point mounting

See Details

White/black/white

See Details

Left-handed version, Steel block, Chromed

See Details

Fits almost all FR-Style locking nuts

See Details

For fixing the strings in conjunction with Kahler Vibrato systems and hybrid bridges, For guitars, Due to the placement behind the saddle it is...

See Details

Suitable for all common locking tremolo systems, Precise processing quality and perfect fit, The special construction of the bushing and the screw...

See Details

For all conventional guitars with tremolo, Discomfort from palm-mutes, bends or string tears are prevented by the Tremmory, Made in Germany

See Details

For most Floyd Rose style tremolo, Set of 6 pieces

See Details

For American Deluxe and Elite Strat, Pop in

See Details

Fits all Schaller locking tremolos, 37 mm

See Details

Spring for Vintage and Standard tremolos, Standard design

See Details

For 62 Jaguar / Jazzmaster Japan, Smooth arm without screw thread

See Details

For Floyd Rose Locking tremolo systems, Red colour

See Details

Original tremolo arm for Edge III

See Details

Original tremolo arm (2TRX5BD001) for Ibanez Edge Zero II

See Details

Suitable for almost all FR-Style tremolos, Pack of 6

See Details

Spring for Vintage and Standard tremolos, Suitable for 7-string guitars, droppings etc., Extra hard version

See Details

Can be mounted on the fretboard both from below (neck through) and from above, Prepared to be installed without further processing with wood or...

See Details

Suitable for Standard Mexico and USA models, Ivory cap, Right-angled

See Details

6 Pieces, Nickel

See Details

For locking nut on Floyd Rose tremolo systems, 0.10 mm

See Details

Suitable for almost all FR-Style tremolos, With housing

See Details

Suitable for all FR-Style tremolos, Pack of 3

See Details

For American Stratocaster - also suitable for American Standard Strat and Malmsteen Upgrade

See Details

For right-handed users PRS SE, S2 and SE Custom 24 2018 models, Chrome-plated, SE-0001

See Details

For electric guitar

See Details

For USA models, For right-hand models, Diameter 4.75 mm, ACC-4015

See Details

For Bigsby & Tremola S70SC, fits Bigsby & Düsenberg Tremola systems, 22 x 19 Dia nickel

See Details

Suitable for Squier Bullet Stratocaster, For standard tremolo with 2-point attachment, M6 thread

See Details

Fits all Schaller locking tremolos, 32 mm

See Details

Teflon coating prevents friction, Normal spring tension possible, Set of 3 springs

See Details

Suitable for all common locking tremolo systems, Convinces with a precise processing quality and a perfect fit, The special construction of the...

See Details

For Pro and Original series

See Details

Can be mounted on the fretboard both from below (neck through) and from above, Prepared to be installed without further processing with wood or...

See Details

Carbon graphite handle, Durable and thick arm for controlled handling, Suitable for Edge, Lo-Pro Edge, Edge-Pro, Edge Zero and Synchroni ZR/ZR-2...

See Details

For Floyd Rose original tremolo

See Details

Bearing bolts for freely floating the Vintage Tremolo, With grooves, Nickel

See Details

Can be mounted on the fretboard both from below (neck through) and from above, Prepared to be installed without further processing with wood or...

See Details

For American Stratocaster - also suitable for American Standard Strat and Malmsteen Upgrade

See Details

Suitable for almost all FR-Style tremolos, With housing

See Details

For Jaguar Special and Jazzmaster Special

See Details

Gold, For Vintage Strat / SRV

See Details

For American Stratocaster - also suitable for American Standard Strat and Malmsteen Upgrade

See Details

Suitable for all Floyd Rose vibrato systems, Made in Germany

See Details

For standard tremolo arm, 4.8 / 5 mm

See Details

Suitable for Jazzmaster models

See Details

For standard tremolo arm, 4.8 / 5 mm, Black

See Details

Suitable for almost all FR-Style tremolos, With housing

See Details

Suitable for VSVG, VSV400, VSV400P or VS400V

See Details

Suitable for all FR-Style tremolos, Pack of 3 pieces

See Details