Displaying 1-75 of 295 products
Tool Kit
The CruzTools contains everything required for changing strings, as well as for adjusting the truss rod, string height and intonation, The set is...
Capacitor
Legendary capacitor for guitar tone controls, Excellent sound quality, Made of high quality polyester, 22 nF (0.022 uF), Especially suitable for...
Dolly
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
Transport Wagon
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
Fretboard Guard
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
Polishing Rubber
For quick and easy sanding and polishing of frets, The rubbery material can be cut to size for all purposes, It adapts perfectly to the curvature...
Wire Cutter
Designed for guitar and bass strings, Special heat treatment process for hardening the blades and avoiding damage, The lever design allows even...
Multitool for Guitar and Bass
For all instrument adjustments, 19-Piece bit set with imperial and metric nuts and screwdrivers, Compatible magnetic bit holder, Metal feeler gauge...
Transport Trolley
For medium-sized tasks, 45 cm long nose, 2 R-Trac wheels 6" x 1.5"
Professional Tool Set for Guitar Techs
Provides everything to optimally adjust a guitar, Professional quality, With simple setup guide in English, 152.4 mm (6 inch) steel ruler, 158.8 mm...
Shielding Set
To shield pickguards, pickups and electrical components, 2 x Self-adhesive copper foil 127 x 180 mm, 1 x Self-adhesive copper foil 30 x 350 mm, 1 x...
Metal Plate with Double-Sided Adhesive Tape
Quick-release pedal attachment system, 4 Bolts for fixing to the board, Includes screws, Made in Canada
The BackboxSmall, but fine auxiliary device to press back a vibrato to its original position
For vintage tremolo, In order to maintain guitar in tune
Transport Wagon
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
IEC AC power adapter
With integrated on-off switch and a noise filter, Fits in every Temple Audio Design micro module slot, Includes two fixing screws and Phillips...
Shielding Copper Adhesive Tape
With conductive adhesive backing
Neck Plate
For '70s style electric guitar, 4 Holes, Without serial number, Includes screws
Neck Plate
Fender / Corona stamping, 4-Hole mounting, Includes screws for American Series guitar and bass
Body Belt
Black elastic nylon fabric with silicone, Patented Easy Tape closure with black zinc buckles
Truss Rod
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
9V Lithium-ion Battery
For mounting on almost every cover, pickguard, electronics compartment cover or any similar metal or plastic part, Capacity similar to a premium...
Guitar Neck Plate
Vintage plain chrome, 4 Holes, Without embossing, Includes screws
String Retainer for Electric Guitar
Reduces tuning problems and string breaks
Original Truss Rod Cover (bell)
For Les Paul guitars, Cover for an adjustable truss rod, Blank / With no inscription
Metal Plate with Double-Sided Adhesive Tape
Quick-release pedal attachment system, 4 Bolts for fixing to the board, Includes screws, Made in Canada
Tool for Steel String Guitars
For easy removal of bridge pins made of plastic, wood and bone, Pulls the pins without damaging them or slipping
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
Knob Pointers
Original historic re-issue positions nickel markers, Special designed to replicate the original parts used by Gibson in the late 1950s, Set of 4...
250K Tone Saver
Allows for sound reduction without tonal change, Classic construction made of mylar and aluminium foil for crisp sharp notes, Dual solder point...
Universal Guitar Extension Nut
Suitable for almost all right-handed guitars, Increases the string height at the nut to play a guitar as a pedal-steel or lap-Steel guitar,...
Capacitor
Legendary capacitor for guitar tone controls, Excellent sound quality, Made of high quality polyester, 47 nF (0.047 μF), Especially suitable for...
Tool Set for Electric Bass
Comes with all tools for optimally adjusting an electric bass, Professional quality, With simple setup guide in English, Feeler gauge with 15...
Fishman Rechargeable Battery Pack
Lithium ion power supply solution for Fishman Fluence pickups, Direct replacement for the tremolo cover on single-cut electric guitars, Does not...
Solderless Pickup Accessory Set
Kit with everything you need for assembly for 1 or 2 active EMG solderless pickups, Contains potentiometer with long corrugation axis, Only...
Special Tool
Tighten the jacks on guitars or amplifiers from the outside, Without twisting or shorting the wires, Compact size, Made of smooth molded plastic to...
Tool for Removing Inserted Potentiometer Knobs
For easy removal of inserted potentiometer knobs, No additional tools needed, No risk of damaging pots, top of guitar or pickguard, Suitable for...
Audio Cable
Braided shielding, Fabric insulation, Perfect for humbucking & vintage style guitar wiring, Silver
Shielding for pickup
62 Original Replacement Shield, Fits pickguards for 62' Strat, Is screwed to shield single coil pickups under normal pickguard
Multitool
1.5/2/2.5/3/4/5 mm allen key, 7 mm hex key for truss rod adjustment, Screwdriver (cross/slot), 50 mm ruler
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
Capacitor
Vintage-style condenser for passive guitar / bass tone controls, 0.047 Microfarad, Especially suitable for guitars with single coil pickups &...
String retainer with rollers
Two parallel rods, one with a left-hand thread, the other with a right-hand thread, that warp when the screws are tightened, Works perfectly in...
Fishman Rechargeable Battery Pack
Lithium ion power supply solution for Fishman Fluence pickups, Direct replacement for the tremolo cover on single-cut electric guitars, Does not...
Machine head set for banjo
Planetary gears, Tuning can be adjusted during playing — Via two different string capstans the tone can be changed by either a semitone (thin...
Replacement Charger
For Line6 James Tyler Variax Li-Ion battery
Foam Rubber for Pickups
The "mounting spring" for pickups that are directly screwed onto the body without a frame (P-Bass, J-Bass, P-90, etc.)
String Sockets
String sockets for Tele and non-tremolo Strat bridges, String guide sleeves, Set of 6 pieces
Fret Marker Inlay Sticker for Guitar
Suitable for electric or acoustic guitar with 24 3/4" (628 mm) 25 1/2" (648 mm) - 21 frets, 22 frets and 24 frets, For fretboard width 43 mm,...
Power Conditioner
Specially designed for effect devices and pedalboards, Eliminates or reduces noise induced by inferior power supplies, Automatically detects the...
500K Tone Saver
Allows for sound reduction without tonal change, Classic construction made of mylar and aluminium foil for crisp sharp notes, Dual solder point...
Pedal Riser
Easy access to the second pedal row on your pedalboard, Made of lightweight aluminium, Easy to attach to the pedal and board via hook & loop tape...
Finger Trainer
Individually adjustable strength, Perfect for exercising for the fingers
Adapter for Security Locks
Secure fastening of the guitar strap using Schaller security locks, Simply mounted to the end pin socket instead of the union nut, Made of solid...
Adapter sockets
For vintage KLUSONs, 6.3 mm Inside Ø, Default, 10 mm, Nickel, 6 Pieces