Displaying 601-675 of 1696 products
Saddle Set
Fitting for most imported ST-style guitars, Also fits America made guitars with a small gap between the saddles, New material improves sustain and...
Bridge
T-Style, Heavy Relic, 6 Single saddle from brass, 3 mm Thick base plate, from solid and highly compressed milled brass, Rich sound with a lot of...
Machine Head Locking/ Clamping Set
Keystone Mini Style Button, 6x left, 6-piece set, Ratio 19:1, Bore diameter 10 mm, Single machine heads with enclosed oil lubrication, Complete set...
Machine Head set (6x left)
Clamping wheel on the back, Staggered for optimal string positioning, Ratio 12:1, Made in USA
Floyd Rose String Locking Screws
FL FRO - SLS B, For Floyd Rose original vibrato, @Pack of 6
Tremolo Springs
Teflon coating prevents friction, Normal spring tension possible, Set of 3 springs
Inlay sticker for guitar
Removable without leaving residue, Suitable for electric or acoustic guitar, 10 Stickers, For fretboard width 50 mm, Includes instructions
Machine Head Set for Classical Guitar
Schaller No. 10330563.31.13, Mounting screws included, Made in Germany
Bridge for a 4-string electric bass
Solid base plate and the single bridges are made from die-cast zinc (like all badass bridges), Saddles are lockable and made from steel
Pickguard For ST Models
HSS Milling, 1 Humbucker and 2 single-coils, 3-Ply
Pickguard for Electric Guitar
Suitable for American and Mexican ST-Style models, Cut-out for 3 single coils, 3 pots and a 3 or 5 way switch, 11-Hole mounting, Original...
Jack Socket Plate
For T-Style Guitars, Metal-plated brass, Suitable for 22 mm openings, Includes screws
Tremolo System
For mounting on flat tops, No routing necessary, Replaces Tune-O-Matic bridge and tailpiece, Complete mounting kit including bridge and locking nut
Pickguard
Original size, For American and Mexican made T-Styles, 8-Hole, 3-Ply, Milling for 2 single coils
Metal Plate with Double-Sided Adhesive Tape
Quick-release pedal attachment system, 4 Bolts for fixing to the board, Includes screws, Made in Canada
Machine Heads Set For Electric Guitar
Locking tuners, Closed, 3 x Right, 3 x Left
Potentiometer Knob
Simple metal knob, For 6 mm axis, Dot marking, Screwable, Rounded head
Original Fender 500 kOhm volume and tone potentiometer
With solid, non knurled shaft, Used in Fender USA instruments, Includes 0.022 mF capacitor to use as a sound controller, 6.35 mm long threaded rod...
Locking Nut
Can be mounted on the fretboard both from below (neck through) and from above, Prepared to be installed without further processing with wood or...
Saddle for ST-Style Electric Guitars
Made of TUSQ, Slotted, Flat bottom, Consistent material properties and quality, Increased harmonic content
Inlay sticker for guitar
Removable without leaving residue, Suitable for electric or acoustic guitar with 24 3/4 inches (628 mm) 25 1/2 inches (648 mm) with 21, 22 or 24...
Stop Tail Piece
An outstanding replacement, replica of the 1958 original, Ideal for tuning of single cut guitars, High grade version made of solid aluminium milled...
Control Plate
For T-Style guitars, 1.76 mm Sheet thickness, 8 mm holes
FR Style Tremolo
Base plate and all parts made from high-quality, hardened, precision cast steel, Hardened knife edges, Complete with R2 locking nut, string...
Ultralite Machine Head
Single machine head left, The Ultralite tuners are semi-enclosed and possess a clear advantage in weight over conventional machine heads, The bass...
Locking Machine Heads for Electric Guitar
6 Pieces for 3 + 3 arrangement, Incorporate string gauges in tuning equation, half turn equals half tone on each string, Quicker and more accurate...
Guitar Bridge
For T-Style guitars, Solid 3 mm brass base plate and Strat-style brass saddles, Includes mounting screws and Allen key
Mechanic Set For Guitar
3 x Left, 3 x Right, Rear clamping wheel, Pin diameter 2.7 mm, For bore of 10 mm, Made in USA
Compensating G-Style Nut
43 mm, Compensates each single string, Requires no permanent modification of the guitar, For every fretboard radius, every fret size and string gauge
Original Tremolo Arm for Vintage Stratocaster
Keystone Mini Style Button, 6x left, 6-piece set, Ratio 19:1, Bore diameter 10 mm, Single machine heads with enclosed oil lubrication, Complete set...
Inlay Sticker for Guitar
Removable without residue, Suitable for electric or acoustic guitar, 11 Stickers, For fretboard width 50 mm, Including instructions
Set of Machine Heads for Electric GuitarEach set is wrapped in a soft polishing cloth. All 6 machine heads are supplied with "Stagger" washers, to optimize the height of the strings at the nut if necessary.
Closed type, 6x Left, Oval buttons
Vintage Tremolo
With "zinc - block", Chrome TV10S, As the old original, Curved tab, With bowed strings through holes, Complete with arm, springs, spring claw and...
Tremolo System for Guitar
Retrofit tremolo bridge for ST-Style, Simple installation without modifications to the instrument, Dive-Only Design, Up to 15° tilt more than...
Tremolo System for Electric Guitar
Retrofit tremolo with bridge for ST style, Easy installation without modifications to the instrument, Dive-only design, Up to 15° more tilt than...
Classical Guitar Machine Heads Gold
Complete set of machine heads for classical guitar, lyra model, For slotted headstock, Pearloid butterfly buttons
Pickguard
For ST - style guitars, With cutouts for 3 single coil pickups, White pearl
Pickguard
For ST-style guitars, Suitable for the HSS, 3-Ply, 11 - Hole
Keystone Mini Style Button, 6x left, 6-piece set, Ratio 19:1, Bore diameter 10 mm, Single machine heads with enclosed oil lubrication, Complete set...
D-Tuner for Electric Bass
Suitable for P- and J-Style basses from USA between the years 1967 - 1982 as well as replicas of these
String Saver Little Saddles
Spare part for Tune-o-Matic bridge Gotoh / TonePros T3B & T3BT, Set of 6, With notch, Almost unbelievably, String-Savers make sure that the strings...
5-way Mega switch
For special circuits, Suitable for 2 humbuckers with split coils or 3 single coils (at the same time simultaneous operation of neck + bridge pickup)
Pickguard Holder
Holder for ES and jazz guitars pickguards, Chrome finish
Fine Tuning Tremolo
Licensed Floyd Rose tremolo, Hardened knife edges and nut made of forged steel, Guarantees an extremely long sustain, With springs, tremolo arm and...
3-5 Way Switch Button
Plastic, Wide and narrow slot, Aged white
Pickguard
Original size, For American and Mexican made T-style, 8-Hole, 3-Ply, Milling for 2 single coils
The BackboxSmall, but fine auxiliary device to press back a vibrato to its original position
For vintage tremolo, In order to maintain guitar in tune
Bridge for Electric Guitar
Suitable for bolt spacings from 74.0 to 74.5 mm, Low-friction roller saddles for excellent tuning stability - ideal for tremolo guitars, Wide,...
Set of Machine Heads for Electric and Western Guitar
Grover-Style Grand Piano
High-Quality Wiring Kit for Single Cut Electric Guitar
1x Switchcraft switch, 1x Switchcraft jack socket, 4x Long CTS 500 kOhm potentiometers, 2x Sprague Orange Drop .022mfd capacitors, 152 cm of...
Original jazz bass saddle
For 4-stringed basses with a modern 9.5" (241 mm) fretboard radius, Pre-slotted, Can be used on the American Standard Jazz bass and other basses...
String saddles
For most Floyd Rose-style tremolos, Set of 6 pieces
Tremolo System for Electric Guitar
For ST style models, Knife edge Tremolo, Insertable tremolo arm, Steel saddles, Includes tremolo arm, stamped steel base plate, springs, spring...
Machine Head Set for Classical Guitar
Nickel-plated, Elaborate engravings, Hammered edge, PTFE bearing, Capstan with ball bearing, Cog inlays made of black mother of pearl, Polished
Machine Head Set for Electric and Steel String Guitar
Precise, wear-free premium mechanisms, Permanently locked, sealed and screwed connections, Special bronze alloy of the worm wheel against corrosion...
Tailpiece
Fits most standard solid body guitars, 51.4 mm String spacing
Jack Plate for Side Attachment
Oval shape, Slightly curved to fit the arched sides of the body, The borehole diameter is 3/8" (9.5 mm), Screws included
Bass Single Rider
An elegant solution for any string spacings and string arrangements
Guitar parts. Who needs them? Well, when you are playing your guitar and all of a sudden one of the tuning knobs breaks off, you do! Okay, so it's unlikely, but if you own a guitar one of these days you are going to need some to replace parts.
That guitar part may be just a guitar string, but be you may be tempting fate by purchasing inexpensive no-name parts for your guitar.
If you have a Fender Stratocaster and a part breaks, you should first look into getting Fender parts for your guitar, rather than a cheap knock off. I know you are now wondering what the difference in the parts could be.
Parts made for your Fender guitar are specifically designed to be a perfect replacement. You probably spent the extra cash for the Fender name on your guitar for a reason. Quality of products, design and sound, perhaps?
So why replace parts of your guitar with a generic brand? Doesn't make much sense does it?
No matter what type of guitar you have, be it Fender, Martin, Gibson, Taylor, or Ibanez, getting parts for your guitar that are of the same brand is crucial. You won't go wrong with parts for your guitar when you stick with the original guitar maker.
Even if its guitar strings you are looking for, check out the guitar manufacturer for what they have available. They should have parts for your guitar for any type of guitar including electric, classical and acoustic guitars.
Our advice when buying parts for your guitar is simple. You get what you pay for so get the best.