Displaying 1051-1125 of 1696 products
Fret set made of nickel silver
Large / jumbo, Highest surface quality thanks to the Wagner "Super Finish", Made in Germany
Bass Bridge and Tailpiece
For Vintage Stratocaster, Butterfly shape, Set of 2
Set of Machine Heads for Electric and Western Guitar
Vintage look, Closed construction, Set of 6 machine heads, Made in Germany
Machine Heads for Electric Guitar
Left-handed machine heads, Strings fixing through rear screw, Made in USA
Sound Control Knob
"Chickenhead" - Shape, Suitable for e.g. - Vox models, With screws
Tremolo Arm
Suitable for Standard Mexico and USA models, Ivory cap, Right-angled
Inlay Sticker for Guitar
Removable without residue, Suitable for electric or acoustic guitar with 24 3/4 inches (628 mm) - 25 1/2 inches (648 mm), For 43 mm fretboard...
Bridge for 6-string bass
80 mm Distance between the outer fixing holes, BB-3558-003, Includes screws
Wraparound Bridge for Electric Guitar
Fits without modification for USA guitars with Standard Center Stud Mound webs, Clean intonation and harmonic overtones, Includes SS1 locking...
Potentiometer for left-handed guitars
250 KΩ, Logarithmic, Knurled shafts, On the contrary to linear taper pots, audio taper pots are available in left-handed versions because wiring...
Machine Head set for Electric Guitar
6 In line set, Clamping wheel on the back, Staggered for optimal string positioning, Ratio 12:1, Made in USA
Tremolo Arm
Suitable for almost all FR-Style tremolos, With housing
Locking Nut
Can be fixed to the guitar neck from the back or the front side, Comes fully prepared for installation without requiring any further treatment to...
Saddle
Ivory-imitation, artificially produced material that when compared to the natural product exhibits no irregularities and is easier to file., 4-string
Pickguard
For left-handed ST-Style models, SSS Equipment for 3 single coils, 3-Ply
Inlay sticker for guitar
Suitable for electric or acoustic guitar with 24 3/4 inches (628 mm) 25 1/2 inches (648 mm) - 21 frets, 22 frets and 24 frets, For fretboard width...
Machine Head set for Electric Guitars
6 Pieces, Perfect vintage dimensions and true to original look, Top locking clamping, For max. headstock thickness 15.4 mm, Attachment via screw...
Locking Nut Cap
Suitable for all FR-Style tremolos, Pack of 3
Fretwire
Small, Hard, 12% Nickel silver, Bendable for curved fretboards
Metal Plate with Double-Sided Adhesive Tape
Quick-release pedal attachment system, 4 Bolts for fixing to the board, Includes screws, Made in Canada
Harmonic Saddle
This is how the T-Style guitar tunes better!!!, Set with 3 smooth brass cylinders, Slightly slanted drill hole, For scale length compensation
Machine Head set for Electric Guitars 3R/3L
Greenish plastic vintage Keystone style heads
Potentiometer
Original potentiometer for Gibson, 300 k ohms, Linear (volume), Long
For Vintage Stratocaster, Butterfly shape, Set of 2
Saddle for Acoustic Guitar
Made of TUSQ, Unslotted, Flat bottom, Consistent material properties and quality, Increased harmonic capability
Jack Plate for ST-Style Guitars
For Vintage Stratocaster, Butterfly shape, Set of 2
Pickguard
For America and Mexico-made ST-Style Guitars, 11-Hole, Original size, 3-Ply, Milling for 3 single coils
Tool for Steel String Guitars
For easy removal of bridge pins made of plastic, wood and bone, Pulls the pins without damaging them or slipping
Tune-o-matic Bridge
Nashville-style lockable bridge, Earmarked, Inch version for USA Models with 4 mm small bolts, Replacement to Original ABR-1
Clamping Machine Head Set for Electric Guitar
For right-handers, The left row has a larger inlet for bass strings, Release the latch on the left bass side counterclockwise, Release the lock on...
B500 kOhm potentiometer
24 mm Housing, Toothed axle, For assembling on wood, 500 k ohms, B-linear
Clamping Machine Head Set for Electric Guitar
Precise, wear-free premium mechanisms, With Velvet-Tec and LX6-Lube technology, Very high quality surface finish due to improved manufacturing...
Original Tremolo Arm
For right-handed users PRS SE, S2 and SE Custom 24 2018 models, Chrome-plated, SE-0001
Socket Plate for Electric Guitar and Electric Bass
For single cut models
For Vintage Stratocaster, Butterfly shape, Set of 2
For Vintage Stratocaster, Butterfly shape, Set of 2
Knob Pointers
Original historic re-issue positions nickel markers, Special designed to replicate the original parts used by Gibson in the late 1950s, Set of 4...
Guitar saddles
These innovative Highwood Contoured Vintage S-Style guitar saddles have recessed height-adjustable screws, Prevents the age-old uncomfortable hand...
Machine Head Set for Guitar
Set of 3 right, 3 left, Kluson Copy for old American guitars, Greenish Keystone buttons, Ratio 1:15, Nickel-plated 546135, Includes sleeves and screws
Machine Head Set for Electric Guitar
6 Pieces, Perfect vintage dimensions and true to original look, For max. headstock thickness 16.1 mm, Including fastening screws, banjo bolts and...
Machine Head Set for Guitar
Locking machine heads for single cut models, 3x Right and 3x left
Sound Control Knob
Brass, Solid, Coarse knurled, Flat surface, Screwable
Tremolo Arm
For USA models, For right-hand models, Diameter 4.75 mm, ACC-4015
Spring
For Bigsby & Tremola S70SC, fits Bigsby & Düsenberg Tremola systems, 22 x 19 Dia nickel
Tremolo Arm
Suitable for Squier Bullet Stratocaster, For standard tremolo with 2-point attachment, M6 thread
Nut
Pre-lotted in Martin Style, With the Zero Glide nut one can provide any guitar with a zero fret and its corresponding advantages without major...
For Vintage Stratocaster, Butterfly shape, Set of 2
250K Tone Saver
Allows for sound reduction without tonal change, Classic construction made of mylar and aluminium foil for crisp sharp notes, Dual solder point...
Wraparound Bridge for Electric Guitar
Very fast response and good Sustain, Intonation curve for the classic oblique mounting, Exact position adjustable bridge (adaptation to different...
Tune-O-Matic Tailpiece Set
Consists of a bridge and a stop bar tailpiece, Locking studs with standard thread included in delivery, Incl. Allen key, For guitars with 4 mm...
Tuner Set
Rotomatics series, For guitar, 3x Right, 3x left, 18:1 Ratio, Ø 10 mm Bore
Machine Head Set for Electric and Steel String Guitar
Precise, wear-free premium mechanisms, Small, lightweight design, With Velvet-Tec and LX6-Lube technology, Very high quality surface finish due to...
Potentiometer
Designed for electric guitars and basses, 250 kOhm, Small housing, Toothed axis / split shaft, Logarithmic operation
Push/Pull Potentiometer
Logarithmic, Long thread, With knurled shaft, Thanks to the dual switch, many combinations are possible such as series/parallel, out-of-phase, coil...
Set of machine heads for electric guitar
For Vintage Stratocaster, Butterfly shape, Set of 2
Sound Control Knob
Suitable for standard potentiometer with 0.65 to 0.7 cm in diameter
Vintage Machine Heads
Original vintage machine heads, 6x In line, 9 mm Sleeve mounting, 6.5 mm Axial diameter
Set of locking machine heads for electric guitar
Replacement for Vintage Fender machine heads, 6 Pieces for 6-in-line arrangement (left), Closed construction, The overlapping design allows...
Tremolo Springs
Teflon coating prevents friction, Normal spring tension possible, Set of 3 springs
Guitar parts. Who needs them? Well, when you are playing your guitar and all of a sudden one of the tuning knobs breaks off, you do! Okay, so it's unlikely, but if you own a guitar one of these days you are going to need some to replace parts.
That guitar part may be just a guitar string, but be you may be tempting fate by purchasing inexpensive no-name parts for your guitar.
If you have a Fender Stratocaster and a part breaks, you should first look into getting Fender parts for your guitar, rather than a cheap knock off. I know you are now wondering what the difference in the parts could be.
Parts made for your Fender guitar are specifically designed to be a perfect replacement. You probably spent the extra cash for the Fender name on your guitar for a reason. Quality of products, design and sound, perhaps?
So why replace parts of your guitar with a generic brand? Doesn't make much sense does it?
No matter what type of guitar you have, be it Fender, Martin, Gibson, Taylor, or Ibanez, getting parts for your guitar that are of the same brand is crucial. You won't go wrong with parts for your guitar when you stick with the original guitar maker.
Even if its guitar strings you are looking for, check out the guitar manufacturer for what they have available. They should have parts for your guitar for any type of guitar including electric, classical and acoustic guitars.
Our advice when buying parts for your guitar is simple. You get what you pay for so get the best.