Guitar Effect Power Supplies

660 mA, Inside negative / Outside positive

See Details

A professional analog power supply, specifically to operate power-hungry DSP pedals, Includes 4x 9V 400 mA isolated outputs (2 of them with 12 V as...

See Details

For Laney Mini and Mini ST amplifiers, 12 V DC, 3000 mA

See Details

10x 9V 100 mA, 2x 9/12V 300 mA, Including 15V 1000 mA DC power adapter (Artec DK18) and cable set (4x of each cable type - 20 cm, 30 cm and 40 cm)

See Details

230 Volt AC, 18 Volt DC, 150 mA, Outside plus (+), inside minus (-)

See Details

Supplies up to 8 effects with power, 7 Outputs 9 V, 1 Output 18 V, 8 + 1 status LEDs, 8 Independent outputs, The remaining outputs continue to...

See Details

Original power adapter for Morley pedals, 9 Volts / 300 mA

See Details

For pedals, 1 A max., 6x 9V 100 mA, 2x 6-12V variable, Short circuit protection, Noise suppression, 3 Blue LED for effect board illumination, 8m...

See Details

Suitable for all Roland Micro Cube GX, 2.1 mm / 5.5 mm

See Details

9V DC Power Supply, 2000 mA, Euro version

See Details

Includes various country adapter plugs 90-230V

See Details

Power supply for up to five pedals directly from the supplied power supply unit, a portable battery, a telephone charger or a computer (battery,...

See Details

230 Volt AC, 18 Volt DC, 150 mA, Outside plus (+), inside minus (-)

See Details

Replacement AC adapter for PowerPlant ISO-1 Pro & ISO-2 Pro, 12V DC @ 2000mA

See Details

With 3.5 mm jack plug, Fits to USA Big Muff Pi (old version), Classic Double Muff, Classic USA Small Stone, Classic Bassballs, Classic Dr.Q, Mini...

See Details

Stabilised voltage, 18 V DC, 2000 mA, 2.1 x 5.5 mm barrel connector, Polarity (-) inside, EU plug

See Details

Suitable for Deluxe Memory Man, Q-Tron, Q-Tron +, Stereo Polychorus, Worm, Deluxe Electric Mistress, Stereo Memory Man, Stereo Polyphase, XO Deluxe...

See Details

Suitable for bass effects such as Modefactor or Timefactor, 500 mA

See Details

Transforms a charger, power bank or computer USB port into a power supply for effect pedals, Provision of stable voltage for effect pedals or other...

See Details

Eight isolated, regulated and filtered outputs, 9, 12 or 16 Volt voltage on the underside adjustable by DIP switch, Blue power LED, With...

See Details

Power distributor with 8 electrically isolated 9V DC 350 mA outputs, POWER and POWER FAIL display, Outputs 4 and 8 with switchable polarization,...

See Details

Multi-output 1200 mA, For DC and AC pedals, 6 Ports in 3 separate sections, Short-circuit protection circuit, Advanced LED monitoring, Temperature...

See Details

For all tube tools, 13V, 600mA, Et al suitable for tubeman and rotosphere

See Details

Compact, lightweight power supply unit that delivers up to 2000 mA stable DC voltage, Powered via a 12 V DC power adapter (included)

See Details

18 V DC, 150 mA, 2.1 x 5.5 mm hollow connector, Polarity (-) inside, EU plug, Made in USA

See Details

For Aguilar Tone Hammer, Negative inside, positive outside

See Details

Powers the pedals with 4 genuine 9 V Danelectro vintage batteries, 4 Outputs, Killswitch to deactivate the outputs; no pulling cables out is...

See Details

Suitable for Hot Tubes, Tube Zipper, The Wiggler, Black Finger, LPB Tube, Tube EQ, English muffin

See Details

For Blackstar HT-Pedals

See Details

Power supply for Behringer V-AMP, V-AMP2, V-AMP3, LX1B and DFX69V-AMP3

See Details

For Radial X-Amp, Re-Amp

See Details

Voltage 4.5 V AC, Power 1000 mA, For Korg PXR4, PX4, PX4B, AWB, AWG, Kaossilator and Kaoss Pad Mini, SR1 Sound On Sound

See Details

Includes 12 V DC power adapter

See Details

9 Volts DC, 1700 mA output power, Input voltage between 100 and 240 volts (automatic voltage adjustment), High-quality construction, virtually...

See Details

9 Volts DC, 1700 mA output power, For up to 8 effects, Input voltage between 100 and 240 volts (automatic voltage adjustment), High-quality...

See Details

For PowerBrick SE-SPB8, 15 V / 1 A

See Details

Stabilised voltage, 9 V DC, 2000 mA, 2.1 x 5.5 mm barrel connector, Polarity (+) inside, EU plug

See Details

9V DC power supply, 2000 mA, UK version

See Details

Suitable for Zoom G3 G3X G5 MS50 MS100BT B3, 9V 500mA, UK Version!

See Details

Suitable for Holier Grail, POG and Flanger Hoax pedals, Voltage 18 V / DC, Coaxial connection - centre positive

See Details

Stabilised voltage, 9.6 V AC, 300 mA, 2.1 x 5.5 mm barrel connector, Polarity (-) inside, EU plug

See Details

Interchangeable plug, Incl. plug for Euro, US, UK & Australia, With convenient storage bag

See Details

230-Volt AC to 18-Volt DC, 150mA, Outside Plus, Inside minus, UK Version

See Details