Bass Amps

Class D amplifier, 700 Watts RMS @ 4 ohms, 350 W RMS @ 8 ohms, Gain with peak LED, Compressor limiter with soft clip, EQ Switch, Drive & volume,...

See Details

Solid state Preamp, Class D-Amp, Limiter, Controls for Gain, Bass, Mid, Treble, Volume, Balanced Direct Out, FX Loop, Line Out/Headphone out, 15 dB...

See Details

500 Watt, Tube preamp with 12AX7 Class-A tube preamp circuit, 3-Band EQ, Bright Switch, Limiter Switch with LED Indicator, Balanced XLR DI-Out,...

See Details

Classic series

See Details

For installing Eich amplifiers in a 19 "rack, Compatible with T-300 (Art.386890), T-500 (Art. 386893), T-900 (Art. 386897) & Rocket 500 (Art....

See Details

Warwick LWA for installation in 19 " rack, 1 Pair

See Details

2x 8" Markbass custom neodymium loudspeakers, Piezo horn, 8 Ohm, Bass reflex on the back, Ground lift, ON/OFF internal loudspeakers when using...

See Details

Based on the Bass Block 800 with new features and refinements, Fits in BassDock speakers as a perfect travel companion, Additional effects loop, A...

See Details

FX Loop, Built-in tuner, Analog signal path, Bass reflex port, AUX input, Headphone jack with Cabsim circuitry

See Details

FX Loop, Built-in tuner, Analog signal path, Bass reflex port, AUX input, Headphone jack with Cabsim circuitry

See Details

Subwoofer for stage, studio, rehearsal room or at home, 2x TS100-Shaker, 2x Neutrik Speaker Twist / jacks, 1x 3.5 mm Headphone connector, Made in...

See Details

Original Warwick Rockbag Warwick LWA Bass Head

See Details

For Warwick LWA for 19" rack mounting, 1 Pair, Includes screws

See Details

Mosfet preamp, Class D amplifier, Mute switch, -15 db switch, Gain control, Adjustable and switchable compressor, Switchable Ultra Low and Ultra...

See Details

Bass reflex port on the back, Controls for Level, Bass, Mid and High, Aux entrance, Headphone output, Line output via XLR (balanced), Speaker...

See Details

Mark Bass 102HF

See Details

Suitable for TubeMeister 18 and TubeMeister 20 Deluxe, Simple and quick-to-install solution for taking the TubeMeister amp in the rack, The Rack...

See Details

FX Loop, Built-in tuner, Analog signal path, Bass reflex port, AUX input, Headphone jack with Cabsim circuitry

See Details

Lightweight construction, Bass reflex housing, 2x Neutrik NL4MP speaker twist connectors

See Details

Monitor design, Bass reflex opening on the back

See Details

Michael League Signature Cabinet, Lightweight and compact design, Closed housing

See Details

For all cabinets and combos (not for tops), Each side 6.35cm length, 135 Degrees, 100-0086A

See Details

FX Loop, Built-in tuner, Analog signal path, Bass reflex port, AUX input, Headphone jack with Cabsim circuitry

See Details

2 Neutrik Speaker Twist/Jack combo connectors, Monitor tilt function with attachable stainless steel support, Ampfixing rail for secure...

See Details

2 Channels, 15" Celestion speakers with 8 ohm impedance and a switchable horn, 145 W at 8 ohm, 300 W at 4 ohm (with additional 8 ohm speaker),...

See Details

250 W, Toneprint capability for selecting effects and artist presets, Built in tuner, TC Bass chorus (loaded), 3-Band tone control, 1 Speaker twist...

See Details

800 Watt @ 4 Ohm, 400 Watt @ 8 Ohm, Dual JFET Preamp, Class D Power Amp, Adjustable compressor, Tone controls for Bass, Mid, Treble and Volume...

See Details

Fully analogue, Two footswitches for drive and mute, Includes power supply

See Details

Eminence 33 mm voice coil, With titanium diaphragm

See Details

Equipped with 2 x 12" Subway Neodymium speakers with adjustable tweeter

See Details

Tube and transistor üreamp, Compressor, 10-Band EQ, Effect send & return, 2x Jack outputs for speakers, Bipolar design, Passive/Active input,...

See Details

Equipped with 4x 10" Subway Neodymium speakers with adjustable tweeter

See Details

4-Band EQ, Gain control, 2 inputs (low / high), FX loop

See Details

Neutrik Combo Speakon external speaker connection, Active 4-band tone control, "Button" knob, Tuner output, Mute switch, Transformer-symmetrical DI...

See Details

Monitor tilt back design, Character switch, Gain controls with Peak LED, Volume control, Enhance Filter switch, Headphone output, Ground Lift,...

See Details

10 W, 8" Warwick Custom speaker, Bass reflex housing, Robust metal grill, Silent Class A preamplifier, 3-Way EQ with controls for bass, mid-range...

See Details

Class D Amplifier, 2 Channels, Drive, Overdrive On/Off, 4-Band EQ, Effect loop, XLR DI output, 2 Speaker Twist/jack outputs, Stereo AUX in,...

See Details

Bass Reflex rear

See Details

Lightweight construction with 15 mm thick poplar plywood, Off, half, full switch for the tweeter, Ampfixing rail, Stainless steel rod for tilting...

See Details

For SVT15E

See Details

FX Loop, Built-in tuner, Analog signal path, Bass reflex port, AUX input, Headphone jack with Cabsim circuitry

See Details

5 effects, 81 rhythm patterns in tempo of 40 - 240 BPM, Inputs for guitar and aux in, Headphone output, Powered by 6 AA batteries (alkaline or...

See Details

Equipped with 1x 12" Eich TE12D (4 Ohm) ceramic loudspeaker and 1 x 4" CT1 membrane mid and high range tweeter, 2 Neutrik speaker twist/ jack...

See Details

Mark Bass 104HF

See Details

Sturdy carrying case for the amplifier MG350, With accessory bag, Comfortable carrying strap

See Details

Mini exercise bass amplifier with professional features, Solid-state design, Digital 70 W amplifier with DSP (Digital Signal Processing), Class D...

See Details

Original bell sound box Blue Amp Series (Blue Soul / Blue Sky / Blue Rock), Carrying handle and shoulder strap, External compartment for cables and...

See Details

For Gaul Krueger combos 810SBX and 810BLX

See Details

AUX in, Effects loop, Built-in compressor

See Details

Monitor housing form, Equipped with a 12” speaker, 4-Band EQ, Built-in limiter, Built in chorus, bright/boost switch, Headphone output, AUX input...

See Details

Bi-amping, Controls for Master Volume, Treble, Mid, Bass and Drive, Low frequencies remain undistorted at higher gain settings, Medium and high...

See Details

MOSFET preamp, Class-D power amp, 5-Band EQ, Shape filter, Balanced DI out, FX loop, Compressor, 2 Speaker connections

See Details

Bass reflex, Black Diamond Tolex, Vintage B-15 Tension

See Details

FX Loop, Built-in tuner, Analog signal path, AUX input, Headphone jack with Cabsim circuitry

See Details

Built-in tuner, Analog signal path, Bass reflex port, AUX input, Headphone jack with Cabsim circuitry, -6 db Pad switch

See Details

Class D amplifier, Active 4-band EQ, "Taste" controller, Tuner output, Mute switch, Transformer balanced DI (pre- & post switchable) with ground...

See Details

Solid wood cabinet with bass reflex front, Jack connection, Solid metal angle grip

See Details

2x Neutrik Speaker Twist / TRS combo jacks, Integrated strain relief for cable Instrument, Ampfixing rail to securely hold the calibration amps,...

See Details

For RS Combo

See Details

For Markbass Big Bang amplifier

See Details

800 Watt @ 4 Ohm, 500 Watt @ 8 Ohm, Pre/post EW, Tone control for bass, mid, high-low and volume control, Treble, Master volume, Variable Pre Shape...

See Details

12AX7 Class A tube preamp, Mute switch, Brite switch (+ 6dB), AUX in, XLR DI output with ground lift, Effects loop, Speaker twist ports

See Details

With embroidered logo MARKBASS

See Details

High-end audio performance, Lightweight construction, Extended bass response and punch/attack, Ferrite loudspeaker, 2x Neutrik NL4MP speaker twist...

See Details

Bass reflex housing

See Details

Equipped with 1x 12" Eich TE12D (8 Ohm) ceramic loudspeaker and 1 x 4" CT1 membrane mid and high range tweeter, 2 Neutrik speaker twist/ jack...

See Details

Equipped with a 12" Ampeg custom speaker, Ampeg ultra hi/lo switch, Preamp with 3-band EQ, Bass Scrambler overdrive, -15 dB Input pad, AUX input,...

See Details

Class D amplifier, Shape EQ contour control, 3-band EQ, XLR DI Out, 1x 6.3mm passive / active bass input, 1x 6.3mm headphone output, Steel grille...

See Details

Analog preamplifier with 4-band EQ, Class D power amplifier, Integrated compressor / limiter, Effect loop, Balanced XLR output (switch for pre/post...

See Details

Power amplifier with 8/4 or 2 ohm impedance switch for optimum adaptation, Preamp 2-stage tube amp Class A / 1 x Mesa 12AT7, Active 5-band EQ (+/-...

See Details

6x 10", Fender special design eminence neodymium speakers, Adjustable horn, 1600 Watts at 4 ohms, 2x jack and 1x Speaker Twist Inputs, 41 kg

See Details

High end technology, Ultra-compact housing, Speaker twist / jack combo jack, Robust "Edge-Lift" handle

See Details

Bass Head, 500 Watt @ 4 Ohm, 300 Watt @ 8 Ohm, Tone control for bass, mid, high-low and volume control, Treble, Master volume, Variable Pre Shape...

See Details

Active 4-band EQ, "Button" controller, Tuner output, Mute switch, Transformer balanced DI (pre- & post switchable) with ground lift, Serial effects...

See Details

Solid wooden cabinet with bass reflex opening at the front, Solid metal corner handle

See Details