Drum Hardware

For Roland CY-5 cymbal pad

See Details

600 Series, Suitable for Delite, S-Classix, Force models, Double braced, With an axial ball joint

See Details

Straight edition, From the 3000 series, Two-fold telescopic extension, Double-braced, Inc. memory brackets

See Details

Sturdy design, 2-Way height-adjustable, 2 Vertical cymbal holders, Tray table for mallets etc., All tray surfaces covered with sound absorbing felt...

See Details

Split seat for free movement of the coccyx, Ideal for drummers with back problems, 3 Legs, Double-braced

See Details

Complete, With 4 multi-clamps for attaching toms, cymbals, etc., Rack with T-legs, Width approx. 110 cm, Height approx. 98 cm

See Details

For connecting two L-Rods or holding arms with 12.5 mm diameter

See Details

Short version

See Details

For LP330A Camlock Bongo Accessory Bracket

See Details

Adjustable height from 80 - 92 cm, Direct Drive pedal system and 2 double-braced legs, New hi-hat holder, Extension tube for a higher cymbal...

See Details

Long, Down tube with 7/8" (22.22 mm) diameter, Retractable boom rod, Approx. 45 cm long, Ratchet cymbal tilter

See Details

8 mm thread, Two cymbal holders - freely rotatable about 360°, Quick fasten lever mechanism

See Details

Three-arm snare basket (rubber-coated), 3 Single-braced legs

See Details

L-Tom arm slides onto the holder

See Details

2 Carrying handles, Shoulder, Tear and waterproof

See Details

For up to 10 stands, Includes 2 casters, 1200 Denier nylon material, Internal padding from flannel, Built-in five-layer reinforcement, Water...

See Details

Light, double braced hardware set, 1 x S600 Snare stand, 1 x P600 Bass Drum Pedal

See Details

Chrome, Maximum stability, 3-Segment clamp, Flexible stand legs

See Details

Two clamps for cymbal arms or tom holder

See Details

Adjustable height, Double braced legs, Suitable for congas of the Marathon Designer or Classic series, Includes allen key, memory lock, screw set...

See Details

"Air Lift" series, Pneumatic height adjustment, Thick padded saddle seat, Extremely stable four-legged base frame, Double braced, Backrest...

See Details

"Roadster" series, Continuously height-adjustable with spindle, Stop-Lock locking function on the spindle, Seat in saddle shape, Vinyl cover,...

See Details

Spring for DW 3000, 4000, 5000, 7000, 8000 and 9000 series bass drum pedals

See Details

For Iron Cobra Pedal, Felt with rod and balance weight

See Details

For attaching cymbal arms to the rack bar

See Details

Height-adjustable in the range of 65-90 cm, Lightweight design with 3-braced legs

See Details

For cowbell montage on bass drum hoops, Adjustable angles and lengths, Docking station design, Includes RPS Rubber Protection Inserts for better...

See Details

Speed-cobra series, Pedal machine impresses with new unique design, Recessed foot-board, Fastball guide camp, Lite chain-ring, Movable spring...

See Details

With EasyGrip adjustment screws, Independently adjustable stand leg, Three-segment clamps, With Memory Clamp

See Details

Tear and water-resistant, Stable wooden bottom, 20 mm foam padding, 2 Zippers, Big exterior pocket

See Details

5700 Series, 1x 5707 Hi-Hat stand, 1x 5709 Cymbal boom stand, 1x 5710 Straight cymbal stand, 1x 5711S Drum pedal

See Details

2000 Series, Single braced, 2x MBS LT V2 Mini boom stand, SP 2000 Single bass drum pedal

See Details

Double-braced tripod base, Super-lock height adjustment with ABS inserts

See Details

Height-adjustable within a range of 73 - 154 cm, 3 Single-braced legs

See Details

Straight design, Double extendable, Infinitely adjustable tilter, Gretsch-style T-Rod wing bolts and wing nuts, White Gretsch felts, Round,...

See Details

Split seat for free movement of the coccyx, Ideal for drummers with back problems, 3 Legs, Double-braced

See Details

2-Way clip, With 2 memory locks

See Details

Single stand for street conga

See Details

For retrofitting Iron Cobra Power Glide and Flexi Glide pedals, Is screwed under the pedal for increased spring back velocity, Retrofitting only...

See Details

Length approx. 10 cm, for screwing to cymbal stands with 8 mm thread

See Details

Incl. boom arm, Incl. memory clamp

See Details

Straight extension bar

See Details

For attaching hi-hats or stacks, Angle adjustable, Separate adjustment of top and bottom cymbal is possible

See Details

For Pearl Stand from the 900 series, Suitable for BC-900, B-900, C-900, D-900, H-900, S-900, T-900

See Details

"Speedcobra" series, Right-foot model, The Speedcobra 310 was developed by the same design principles as the Speedcobra 910, Enlongated, set back...

See Details

With EasyGrip adjustment screws, Independently adjustable stand leg, 3-Segment clamping clips, With Memory Clamp

See Details

Tear- and water-resistant, All supporting parts are reinforced, Lined with 20 mm foam, 10 mm zipper, Padded handles, Robust castors, Wooden bottom...

See Details

Mapex Armory Series, Double braced, 1 x P800 Bass Drum Pedal

See Details

For connecting two 38 mm rack tubes, Suitable for Millenium E-Drum Racks MPS-100 / 150 / 200 / 400 / 425 / 600

See Details

Steely II model, Suitable for Mongo Santamaria Artist series, Patented system for easy installation, Metal tip on the foot and L-shape for a sturdy...

See Details

Rod holder for 10.5 - 12.7 mm diameter, Includes memory lock

See Details

Connects and stabilizes two travel conga stands

See Details

Adjustable height and inclination

See Details

Split seat for free movement of the coccyx, Ideal for drummers with back problems, 3 Legs, Double-braced

See Details

For Iron Cobra Pedal, With rod and balance weight

See Details

Power Glide system, The Power Glide features a double-chained offset cam which increases power and speed as the beater reaches the end of the...

See Details

Double-braced stand, Height adjustable, Retractable boom arm, Stepless lockable cymbal receptacle

See Details

Developed with Gregg Bissonette, Ideal for multitasking drummers and percussionists, Single chain, Base plate, DWCP2010T, Includes tambourine with...

See Details

From the millenium 601 series, "Smooth Touch" screws, Ideal for club sets or vintage style drum sets

See Details

Double-braced, 1 Ball point tom arm, Cymbal arm with boom, Stacker, Multi clamp, Memory clamp

See Details

Double-stitching, Without casters, Double handles, Padded shoulder strap, Interior lined with fleece, Integrated divider, Straps for fastening...

See Details

Height adjustable in the range of 62 - 104 cm, Three double braced legs, Including 2x CL 940 tom tom arms, Tom tom arms longer than in the WS-865...

See Details

Braced legs, Extra light, Easily extendable, Flat base legs, Gear ring tilter

See Details

Model PSO1800, Rack with legs that due to their design, offer good stability, Curved front bar, Incl. 4 Multi-clamp for tom-tom- or cymbal arms

See Details

Round shape, 3-Legged double-braced undercarriage, Rotary spindle with memory locking system, Seat made of nylon material with cooling effect,...

See Details

For all Tama bass drum pedals, Regular tension

See Details

Can be fixed to hoop via screws

See Details

For mounting onto bass drum, With rosette, 12" cymbal arm

See Details

"Road Series" chrome, Stackable Right Angle Clamp, allows you to mount two rack tubes at the same height, Connects rack tubes at right angles,...

See Details

For attaching the hi-hat to the bass drum hoop, Ideal for drummers with 2 bass drums, The hi-hat is stabilized and its stability increased

See Details

1027GWB, Stick holder for 3 pairs of drumsticks, Travis Barker Edition, For connecting to an existing tripod

See Details

Double-leg, double-braced, extremely sturdy hi-hat stand, Pedal resistance setting is freely selectable in 6 steps with one hand, and thus quick...

See Details

Base drum pedal, Chain drive, pedal to beater - position adjustable, Ninja bearing - impress with their micro-polished steel balls with ultra-low...

See Details

Left-sided version, New Demonator longboard footboard, Single chain, Round cam disk, Base plate, DuoBeat beater, Beater angle adjustable as desired

See Details

Rolling Glide System, The Rolling Glide System comes with a double chain and a round drive pulley, which ensures even acceleration of the beaters,...

See Details