Displaying 1-68 of 68 products
Flight Case with Blue Wheels
Custom, made to measure - for Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner, Gallien Krüger, Yamaha, Engl, etc.,...
Light Case
Made from plywood and covered with nylon, 2 Side carry handles, Telescopic handle and corner casters, Suitable for almost all 1x12" guitar combos
Flight Case for Guitar and Bass Amp Heads
Custom, made to measure - for Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner, Gallien Krüger, Yamaha, Engl, etc.,...
Flight Amp Case
7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring loaded butterfly latches, 2x Folding handles, Medium steel ball corners, At least...
Case for Kemper Amps with a Foot Switch
Double door case suitable for a Kemper Profiling amplifier PowerHead and the Profiler Remote Control foot switch, With phenolic resin, 22 x 22 mm...
Combo Case W/ Wheels
Custom made flight case with casters for Fender Blues Deluxe and Hot Rod Deluxe, Made from 7mm birch plywood, 30 x 30 mm Aluminium edge, 10 mm Foam...
Custom Made Hood Case
For Vox AC 30C2, AC15C2, VOX AC30 C2X Blue Bulldog, AC 30HW2, AC 30HW2X, TB35C2, AC30VR, Foam padding, 2 Spring-loaded butterfly closures (large),...
Flight case
Custom made case for Ampeg SVT AV Top, Classic, CL, 350H, 450H, VR and V4BH, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2...
Flight Case for Guitar and Bass Combos
Case is custom made - e.g. for Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner, Gallien Krüger, Yamaha, Engl, etc.,...
Amp Case for Orange Amp Head
7 mm Birch plywood, 30 x 30 mm Aluminium edges, 1-5 cm Foam padding, 2 Folding handles, 2 Medium spring loaded butterfly latches, Medium steel ball...
Flight Case
At least 30 x 30 mm of aluminum edges, 10 mm Foam padding, 2 Handles, 2 Spring-loaded butterfly latches, large, 4 x 100 mm swivel castors (2...
Flight case
Custom made for Fender Blues Junior I, II, III und IV, 30 x 30 mm Aluminium edges, With 10 mm of foam padding, 2 Spring loaded butterfly latches, 2...
Flight Case for Live Applications
For Marshall 4x12 guitar amplifiers with caster board, From 7 mm birch plywood, With 30 x 30 mm aluminium edges, 2x Large spring loaded butterfly...
Case for Amp Head
Custom made flight case for EVH 5150 MKIIII, 50 W version, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2 Medium spring loaded butterfly...
Flight Case for Kemper Profiling Amplifier
7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring loaded butterfly latches, 1x Strap handle, Rounded steel corners, Padded with at...
Flight Amp Case
For Peavey 5150/6505/6534+ top amps, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring-loaded butterfly latches, 2x Folding handles,...
Live Case
For 4 x 12 guitar / bass cabinet, Case is made to measure (e.g. for Ampeg, Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes &...
Flight Amp Case
Made in Germany, Custom-made flight case for Laney IRT IRT 60 and 120 Ironheart, 7mm Birch multiplex, 30 x 30 mm Aluminium edges, 10 mm Foam...
Flight Amp Case
Custom made flight case for Engl Fireball E-625/E-635, Powerball E-645, Powerball II E-645/2, Ritchie Blackmore Signature E-650 and Savage 120...
Thon Flight Amp Case
For Mesa Boogie Rectifier amp head, Made in Germany, Custom-made case for Mesa Boogie Single, Dual and Triple Rectifier, 7 mm Birch plywood, 30 x...
Custom Made Hood Case
For Vox AC 30C2, AC15C2, VOX AC30 C2X Blue Bulldog, AC 30HW2, AC 30HW2X, TB35C2, AC30VR, 30 x 30 mm Aluminum edging, Foam padding, 2 Spring-loaded...
Live Case
For 4x10 guitar cabinet, Case is made to measure (e.g. for Ampeg, Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner,...
Amp Case
Custom made flight case for Fender 65 Twin Reverb, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, At least 10 mm of foam padding, 2 Folding...
Flight Case
Custom made flight case for the Hughes & Kettner Tubemeister and Grand Master 36 / 40 amp head, Made from 7mm birch plywood, 22 x 22 mm aluminium...
Light Case
Suitable for almost all top amps, Made from plywood, Covered with nylon, 2 Side carry handles, Telescopic handle and corner casters
Flight case
Custom made for the Kemper Remote Control, Made from 7mm birch plywood, Phenolic resin coated, 22 x 22 mm Aluminium edges, 2 Butterfly catches, 1...
Case for Fender Amps
Custom made case for Fender Hot Rod Deluxe Combo, Deluxe 112 Guitar Box and Fender Blues Deluxe Reissue, 30 x 30 mm Aluminium edges, At least 10...
Transport Case
Custom made chest case for Ampeg SVT-810 E, AV and heritage SVT-810 E, Made from 9 mm birch plywood, 35 x 35 x 3 mm Aluminium edging with...
Amp Case
Suitable for the Fender Bassman 500, 7 mm Birch plywood, Coated in phenolic resin, 22 x 22 mm Aluminium profile, 2 Butterfly catches, 2 Folding...
Combo Case W/ Wheels
Custom made flight case with casters for Fender 65 Princeton Reverb, Made from 7mm birch plywood, 30 x 30 mm Aluminium edging, 10 mm Foam padding,...
Flight Case For Guitar Amplifiers
7mm Birch multiplex (with orange PVC coated), 30 x 30 mm Aluminium edges, 2x Medium sprung butterfly latches, 2x Hinged handle medium, Medium steel...
Double door rack case
Made from 7 mm birch plywood, With 30 x 30 mm aluminium edges, 4x medium spring loaded butterfly latches, 2x medium folding handles, All connectors...
Amp Case
Custom-made flight case for Mesa Boogie Mark 5, 7mm Birch multiplex, 30 x 30 mm Aluminium edges, 10 mm Foam padding, 2 Handles, Medium sprung...
Flight Case with Casters
Custom made flight case for Marshall DSL 40C Combo, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2 Large spring loaded butterfly...
Flight Case
Custom made flight case for Vox AC-15 Hw1, HW1X and TB-35 C1, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2 Large spring loaded...
Combo Case W/ Wheels
Custom made flight case with casters for Marshall SL 5, Made from 7 mm birch plywood, 30 x 30 mm Aluminium edge, 10 mm Foam padding, 2 Handles, 2...
Amp Case
Custom made flight case for Marshall DSL 100H, 7mm Birch multiplex, 30 x 30 mm Aluminium edges, Upholstered, 2x Sprung medium butterfly latches, 2x...
Flight Case For Mesa Boogie Mini Rectifier Twenty-Five Top
7 mm Birch multiplex, 30 x 30 mm Aluminium edges, Min. 10 mm foam padding, 2 Suspension medium butterfly latches, 1x Handle, Steel corners,...
Case For Amp Head
Custom made flight case for Hughes & Kettner Triamp Mark 3, 7 mm Birch multiplex, 30 x 30 mm Aluminium edges, 2 Medium suspension butterfly...
Custom Flight Case
For Orange PPC-112, 30 x 30 mm aluminium edges, At least 10 mm foam padding, 2 Folding handles, 2 Large spring-loaded butterfly locks, Made in Germany
Flight case
Custom made flight case for Marshall DSL 15C Combo, 7mm Birch multiplex, 30 x 30 mm Aluminum edges, Upholstered, 2x Sprung butterfly latches large,...
Case
For Orange AD-30 TC and Rockerverb 50 MKIII 212, 30 x 30 mm aluminium edges, At least 10 mm foam padding, 2 Folding handles, 2 Large spring-loaded...
Flight Case
For AER Compact 60 II Combo, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2 Spring loaded butterfly latches, 1 Strong strap handle, Medium ball...
Case
Custom made flight case for Diezel D-Moll 100 Head, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2 Large spring loaded butterfly...
Flight Case
For EVH 5150III Lunchbox Top, 30 x 30 mm aluminium edges, At least 10 mm foam padding, 2 Spring-loaded medium butterfly latches, 1 Suitcase handle,...
Flight Case
Custom made flight case for Engl Iron Ball 20 Head, From 7mm Birch plywood, 22 x 22 mm Aluminium edge, 10 mm foam padding, 2 Small sprung butterfly...
Flight Case
Custom made hood case for Orange Tiny, Dark, Bass 500 Bass 1000 and Jim Root Terror, Made from 7mm birch plywood, 22 x 22 mm Aluminium edging, 10...
Combo Case
Custom made flight case for Marshall AS 50D, 50R and 50dC, Made from 7 mm birch plywood, 30 x 30 mm Aluminium edges, 10 mm Foam padding, 2 Handles,...
Trolley
Roller transporter for Amp head & combo, 8 mm Thick plywood, Solid water-resistant surface material RokTex, 25 mm thick padding, 10 mm wider zip...
Case For Amp Head
Custom made flight case for Mesa Boogie Mark V 25 top part, Made from 7 mm birch plywood, 30 x 30 mm Aluminium edging, 10 mm Foam padding, 2 Medium...
Flight Case
Custom made for Marshall MA-50 / 100H, Made from 7mm birch plywood, With 30 x 30 mm Aluminium edging, 1-3 cm Foam padding, 2 Medium sprung...
Flight Amp Case
For Peavey Valve King 100 amp head, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring loaded butterfly latches, 2 Folding handles,...
Case for Amp Head
Custom-made flight case for Jet City Amp 50H and Jet City Amp 100 HDM, 7 mm birch plywood, 30 x 30 mm aluminium edges, 2 Sprung medium butterfly...
Case
Custom made flight case for Mesa Boogie Mark V, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, At least 10 mm of foam padding, 2 Folding handles,...
Professional Flight Case
For a 4x10 guitar or bass speaker, Case is custom made (e.g. for Ampeg, Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes &...
Flight Case
For Gallien Krueger MB150S-112 III-112 and MB150E III bass combos, 7 mm Birch multiplex, 30 x 30 mm Aluminium edges, 2x Medium sprung butterfly...
Custom Made Flight Amp Case For Fender FM-212
7mm Birch multiplex, 30 x 30 mm Aluminium edges, Upholstered, 2 Handles, 2 Spring-loaded butterfly latches large, Steel corners, Made in Germany
Flight Case
Custom made flight case for Marshall DSL 15H, 7 mm birch plywood, 30 x 30 mm aluminium edges, Foam padding, 2x Sprung medium butterfly latches, 2x...
Combo Case W/ Wheels
Custom made flight case with casters for Fender Mustang IV Combo V2, Made from 7mm birch plywood, 30 x 30 mm aluminium edging, 10 mm Foam padding,...
Flight Amp Case
Made in Germany, Custom-made flight case for Engl 2x 10" (E-350C), Raider 100 (E344), Screamer 50 (E-330), Sovereign 100/112 (E-365), Made from 7...
Case For BluGuitar Amp
Custom made for BluGuitar Amp 1 + Remote1, From 7mm birch plywood, Coated phenolic resin, 22 x 22 mm Aluminium edge, 1 Artificial leather grip, 2...
Custom Hood Case
For Peavey 3120, With 30 x 30 mm aluminium edges, At least 10 mm foam padding, 2 Folding handles, 2 Large spring-loaded butterfly locks, Made in...
Combo Case W/ Wheels
Custom made flight case with casters for Marshall AS 100D, Made from 7mm birch plywood, 30 x 30 mm Aluminium edge, 10 mm Foam padding, 2 Handles, 2...
Professional Flight Case
For 4x12 guitar or bass box, On a caster board with 100 mm casters (2 with brakes), 9 mm birch plywood, 30 x 30 mm aluminium edges, 2x Large sprung...
Amp Case for Bugera V22 Combo
Made in Germany, Custom-made flight case for a Bugera V22, 7mm Birch multiplex, 30 x 30 mm Aluminium edges, 1 cm Foam padding, 2 Handles, 2...
Combo Flight Case with Wheels for Fender FM 212
7 mm Birch multiplex, 30 x 30 mm Aluminium edges, 1 cm Foam padding, 2 Large sprung butterfly latches, 2 Handles, Steel corners, 4 x 100 mm swivel...
Amp Flight Case W/ Braked Castors For Bugera V22 Combo
Made in Germany, Custom-made hoods case with castors braked for Bugera V22, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 1cm Foam padding, 2...
Combo Case W/ Wheels
Custom made flight case with casters for Roland Blues Cube Artist Combo, Made from 7mm birch plywood, 30 x 30 mm Aluminium edging, 10 mm Foam...