Flightcases

Custom, made to measure - for Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner, Gallien Krüger, Yamaha, Engl, etc.,...

See Details

For guitar, Suitable for St-style, T-style, double cut and single cut models, Coated plywood, Aluminium edges, Rounded chrome corners, Nickel steel...

See Details

For electric bass, Rounded chrome corners, Nickel-plated steel spring handle with transparent PVC cover, Five robust hinges, Padded inside cover...

See Details

Waterproof, dustproof and airtight carrying case with sturdy carrying handle, Impact resistant hard plastic case, Rubber seal, Wall valve for...

See Details

Protection IP65, Water, dust and airtight transport case, Sturdy handle, Impact resistant hard plastic case, Rubber seal, Wall valve for pressure...

See Details

Extremely robust polyethylene construction, Interior customizable by a unique block design, 4 TSA latches (2 of them with a lock), 2 rubber...

See Details

For Roland SPD-SX with mounted plate Millenium Multi-Clamp, Space for power supply, 25 x 25 mm aluminum edge, Min. 10 mm foam padding, 2 Snaps...

See Details

Custom made for the Moog Sub 37, Coated from 7 mm birch plywood and coated in phenolic resin, 25 x 25 mm Aluminium edges, 1 Synthetic leather...

See Details

Made from 7 mm birch plywood, Foam inlay, 22 x 22 mm aluminium edges, Steel corners, 2 Spring-loaded butterfly latches mini, 2 Lid hinges, 1...

See Details

Butterfly latches, Rounded ball corners, 4x 100 mm Casters (2 are fitted with brakes), Incl. 2 dividing walls

See Details

Made from plywood and covered with nylon, 2 Side carry handles, Telescopic handle and corner casters, Suitable for almost all 1x12" guitar combos

See Details

Custom, made to measure - for Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner, Gallien Krüger, Yamaha, Engl, etc.,...

See Details

With 2 wheels, Very wide design

See Details

3 Compartments, 4 Casters, 2 of them with brakes, 10 mm plywood, Internal dimensions (W x H x D) 98.5 x 40 x 48.5 cm, Black coated, Includes two...

See Details

Nearly indestructible polyethylene construction, Interior customizable by a unique block design, 2 TSA latches, 2 rubber handles, Aluminium housing...

See Details

7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring loaded butterfly latches, 2x Folding handles, Medium steel ball corners, At least...

See Details

With 2 wheels

See Details

Protection IP65, Water, dust and airtight transport case, Sturdy handle, Impact resistant hard plastic case, Rubber seal, Wall valve for pressure...

See Details

For Clavia Nord Stage 3 88, 30 x 30 mm aluminium edges, Foam padding, Spring-loaded medium-butterfly latches, 2 Medium folding handles, 1...

See Details

With 2 wheels, Ideal for storing drum hardware

See Details

Double door case suitable for a Kemper Profiling amplifier PowerHead and the Profiler Remote Control foot switch, With phenolic resin, 22 x 22 mm...

See Details

From 7 mm birch plywood, Foam inlay, 22 x 22 mm Aluminium edges, Steel corners, 2 Spring-loaded butterfly latches (mini), 2 Lid hinges, 1 Lockable...

See Details

Thanks to a special foam (15 x 15 mm cubes), the interior dimensions can be made variable, 22 x 22 mm Aluminium edges, 1 Suitcase handle, 2 Snap...

See Details

Custom made flight case with casters for Fender Blues Deluxe and Hot Rod Deluxe, Made from 7mm birch plywood, 30 x 30 mm Aluminium edge, 10 mm Foam...

See Details

Custom made case for Warwick RB Corvette, Made from 7 mm birch plywood, 22 x 22 mm Aluminium edges, Foam inlay, Steel corners, 2 Spring-loaded...

See Details

Nearly indestructible polyethylene construction, Interior customizable by a unique block design, 2 TSA latches, 2 rubber handles, An additional...

See Details

Mold Drum Series, For 22" x 18" bass drum, Robust, extremely sturdy polyethylene production, Padded interior, Padding riveted in case, Approx. 5 cm...

See Details

For Vox AC 30C2, AC15C2, VOX AC30 C2X Blue Bulldog, AC 30HW2, AC 30HW2X, TB35C2, AC30VR, Foam padding, 2 Spring-loaded butterfly closures (large),...

See Details

30 x 30 mm aluminium edges, 4 Medium ball corners on top, 4 Stackable ball corners at the bottom, 2 Spring loaded butterfly latches, 4 Heavyweight...

See Details

Nearly indestructible polyethylene construction, Interior customizable by a unique block design, 2 TSA latches, 2 rubber handles, Aluminium housing...

See Details

Custom made case for Ampeg SVT AV Top, Classic, CL, 350H, 450H, VR and V4BH, From 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2...

See Details

For semi-hollow body models, 22 x 22 mm aluminium edges, 2x Butterfly latches, 1x Mounting bracket, 2x Locking hinges, 1x Leather handle, Steel...

See Details

25 x 25 mm Aluminium edges, 1 x Suitcase handle, 2 x Drawbolts, 2 x Locking hinges, Medium rounded ball corners, Manufactured in Germany

See Details

For Dave Smith Instruments Prophet REV2-8 or REV2-16, 30 x 30 mm Aluminium edges, 2 Butterfly latches, 1 High-quality synthetic leather grip, 2...

See Details

Made of extra hard polyethylene, One-piece, durable construction, Low weight, Optimal positioning of the handles, Easy to use, Maximum flexibility,...

See Details

110 cm inner length, Solid, water-resistant material RokTex, 5 mm Padding, 10 mm Wide zip, 4 Padded handles, 2 Large full plastic wheels, 1x...

See Details

Custom made case for Sandberg Basic 5 Bass, Made from 7 mm birch plywood, 22 x 22 mm Aluminium edges, Foam inlay, Steel corners, 2 Spring-loaded...

See Details

Extremely durable, Made from waterproof synthetic material, Very high quality design, Comfortable handle, Stackable

See Details

Four extremely sturdy wheels for easy transportation, Grooved casing for secure stacking of every size and every case

See Details

10 mm plywood, 35 x 35 x 3 mm aluminium edges, Big ball corners, 2 Large butterfly closures, 2 Lid stays, 8 Folding handles, 4 100 mm swivel...

See Details

The inside is coated with foam, Ball corners, Stackable

See Details

Case is custom made - e.g. for Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes & Kettner, Gallien Krüger, Yamaha, Engl, etc.,...

See Details

Nearly indestructible polyethylene construction, Customisable unique interior block design, 2 TSA latches, 2 Rubber handles, Powder coated...

See Details

Roto Mold Drum Series, Robust, extremely sturdy polyethylene production, Padded interior, Padding riveted in case, 2" Wide, completely...

See Details

7 mm Birch plywood, 30 x 30 mm Aluminium edges, 1-5 cm Foam padding, 2 Folding handles, 2 Medium spring loaded butterfly latches, Medium steel ball...

See Details

At least 30 x 30 mm of aluminum edges, 10 mm Foam padding, 2 Handles, 2 Spring-loaded butterfly latches, large, 4 x 100 mm swivel castors (2...

See Details

30 x 30 mm aluminium edges, 4 Medium ball corners on top, 4 Stackable ball corners at the bottom, 2 Spring loaded butterfly latches, 4 Heavyweight...

See Details

For Yamaha Genos, 30 x 30 mm aluminium edges, Foam padding, 2 Spring-loaded medium-butterfly latches, 2 Medium folding handles, Artificial leather...

See Details

Extremely durable, Made from waterproof synthetic material, Very high quality design, Comfortable handle, Stackable

See Details

Custom made for Fender Blues Junior I, II, III und IV, 30 x 30 mm Aluminium edges, With 10 mm of foam padding, 2 Spring loaded butterfly latches, 2...

See Details

Customisation for Hohner B2AV, With mold cutting, Made from 7 mm birch plywood, Foam inlay, 10 mm Foam padding, 22 x 22 mm Aluminium edges, Medium...

See Details

The inside is lined with carpet, Ball corners, Stackable

See Details

7 mm Birch plywood, 22 x 22 mm Aluminium edges, 1x Suitcase handle, 2x Drawbolts, 2x Locking hinges (lid is not removable), Small rounded corners,...

See Details

For Roland FP-90, 30 x 30 mm Aluminium edges, Sufficient foam padding in the bottom and lid, 4 Spring loaded butterfly latches, 2 Folding handles,...

See Details

Nearly indestructible polyethylene construction, Interior customizable by a unique block design, 2 TSA latches, 2 rubber handles, An additional...

See Details

Bass drum case, For 20" bass drum, Includes 75 mm rubber wheels

See Details

For Marshall 4x12 guitar amplifiers with caster board, From 7 mm birch plywood, With 30 x 30 mm aluminium edges, 2x Large spring loaded butterfly...

See Details

For the Roland AX-Edge, Made from 6.5 mm birch plywood, 2 Medium-sized 12 mm spring-loaded butterfly latches, Leather handle, Drawbolt with lock...

See Details

The inside is lined with carpet, Ball corners, Stackable

See Details

Custom made flight case for EVH 5150 MKIIII, 50 W version, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2 Medium spring loaded butterfly...

See Details

35 x 35 x 3 mm Aluminium edges with grooved rivets, Male / Female lock profile, Large ball corners, 2x Large spring-loaded butterfly latches with...

See Details

Suitable for Clavia Electro 5D-73 and 6D-73, 25 x 25 mm Aluminium edge, 3 Snap locks with locking eyelet, 2 Locking hinges, 1 High-quality...

See Details

The inside is lined with carpet, Ball corners, Stackable

See Details

7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring loaded butterfly latches, 1x Strap handle, Rounded steel corners, Padded with at...

See Details

Standard design, Robust, extremely sturdy polyethylene material, Padded interior, Padding riveted in case, 2" Wide, completely tear-resistant Gator...

See Details

For Peavey 5150/6505/6534+ top amps, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 2x Medium spring-loaded butterfly latches, 2x Folding handles,...

See Details

Suitable for Korg Kronos 88, Made of 6.5 mm birch plywood, 30 x 30 mm Aluminium edge, 2 Butterfly closures, 1 High-quality imitation leather...

See Details

Rock/Fusion 3 Set, Lightweight case, Ideal positioning of handles, Easy to use, Maximum flexibility, The various sizes can be stacked together...

See Details

For 4 x 12 guitar / bass cabinet, Case is made to measure (e.g. for Ampeg, Marshall, Fender, Line 6, Mesa Boogie, Hartke, Peavey, Laney, Hughes &...

See Details

For Dave Smith Instrument Sequential Prophet 6, 30 x 30 mm aluminium edges, 2 Butterfly latches, 2 Locking hinge, 1 High-quality artificial leather...

See Details

Roto Mold Drum Series, Robust extremely stable polyethylene construction, Padded inside, Padding is riveted in the case, 2" Wide super...

See Details

Made in Germany, Custom-made flight case for Laney IRT IRT 60 and 120 Ironheart, 7mm Birch multiplex, 30 x 30 mm Aluminium edges, 10 mm Foam...

See Details

Custom made flight case for Engl Fireball E-625/E-635, Powerball E-645, Powerball II E-645/2, Ritchie Blackmore Signature E-650 and Savage 120...

See Details

30 x 30 mm aluminium edges, 4 Medium ball corners on top, 4 Stackable ball corners at the bottom, 2 Spring loaded butterfly latches, 2 Heavyweight...

See Details

Ball corners, 4x 100 mm roll (2 braked), Incl. 2 dividing walls

See Details