Displaying 901-975 of 1155 products
Rear Door for Studio Rack 10 U
2x Hinges, 1 Lock with 2 keys, 1 Strike plate, Mounting screws included, Made in Germany
Accessory case
Made of super light, proprietary HPX² polymer, Up to 40% lighter than other polymer cases, Shockproof, Water resistant, Oil and grease resistant,...
19 "Rack
Made of steel plates with 19" rack rails on the front and back, Powder coated finish with black textured paint, Dimensions 525 x 417 x 430 mm
Keyboard Case
Customisation for KORG SP250, From 7mm birch plywood, 30 x 30 mm aluminum edges, Min. 1 cm foam padding, 2 Handles in tray, 4x Butterflies sprung,...
Case for two Tom Toms
Combo Case for transporting two toms, For 14" and 15" toms
Rack Strip Set
For self-assembly in Thon studio rack 18U 50, 2 Rack rails stocked with nuts and rubber inserts, Incl. mounting screws and M6x12 rack screws and...
Accessory Case
30 x 30 mm aluminium edges, 4 Medium ball corners on top, 4 Stackable ball corners at the bottom, 2 Spring loaded butterfly latches, 4 Heavyweight...
Keyboard case for Roland FP-7
Strong keyboard case, Made to fit the Roland FP-7, Professional quality, 7mm Birch plywood, 10 mm Foam padding, 30 mm Aluminium edges, Medium steel...
Case for Snare Drum
Extremely durable, Made of waterproof plastic, High-quality design, Comfort handle, Stackable
2 U Rack Panel
Made from super lightweight proprietary HPX² polymer, making it up to 40% lighter than other polymer cases, Impact resistant, Watertight, Oil and...
Closed Rack Panel 19" 2U
Made from super lightweight proprietary HPX² polymer, making it up to 40% lighter than other polymer cases, Impact resistant, Watertight, Oil and...
Transport Case
The legendary equipment case from USA, Shockproof, Waterproof, Oil and grease resistant, Military standard, With pressure equalisation valve,...
Keyboard Case
Made to measure specifically for Yamaha Tyros 5 with 76 keys, Made from 7mm birch plywood, 30 x 30 mm aluminum edge, Upholstered, 2 Spring-loaded...
Rear Door for Studio Rack 18 U
2x Hinges, 1x Lock with 2 keys, 1x Lock plate, Mounting screws included, Made in Germany
Front Panel
Sheet steel, 4 Ux1BE with Harting cutout 24/64/108, Made in EU
Transportation Case
Protection IP65, Water-tight, dust-tight and air-tight, Sturdy handle, Trolley with pull-out handle, Housing made of impact-resistant hard plastic,...
Studio Roll Rack 19"
10 RU Effective height, Minimum 27.6 cm installation depth (see picture), Continuously adjustable rack rail, 45° Angled, Lockable castors,...
Plastic Case
Made to measure specifically for Yamaha Tyros-2, 7 mm high-quality black plastic (30% lighter than wood), 25 x 25 mm aluminum edging, 10 mm foam...
Bass Drum Case
Revolutionary roto-moulded d-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
1 U Rack Panel
Made from super lightweight proprietary HPX² polymer, making it up to 40% lighter than other polymer cases, Impact resistant, Watertight, Oil and...
Tour-Seating
Tour set consisting of 2 armchairs, table and 2 stools, Completely stowable as a case and therefore ideal for breaks in the tour everyday,...
Bag
Suitable for MOBILE CUBE, Water repellent material, Shoulder strap, Compartment for spare batteries
Keyboard Case
Custom-made for Yamaha P-140, P-155 or P-70, Case made of 7 mm birch plywood, 30 x 30 mm aluminium edges, Min. 10 mm foam padding, Medium ball...
Drawer Case
5 Drawers, 30 x 30 mm Aluminium edge, 2 Spring-loaded medium butterfly latches, 4 Folding handles, Large steel ball corners, 4 100 mm Swivel...
Keyboard Case
For the Roland FP-10 BK, Made from 7 mm birch plywood, Foam padding in the bottom of the case and in the lid, 2 Spring-loaded butterfly latches, 2...
Accessories Case 120 x 50 x 50 cm
30 x 30 mm aluminium edges, Medium ball corners, 2 Spring loaded butterfly latches, 4 Heavyweight folding handles, Large locking hinges, Made in...
Sturdy carrying case
Tear resistant nylon fabric, Water repellent, Padded carrying handles and an adjustable shoulder strap, Plastic feet protect the bottom of the...
Keyboard Case
For the Kawai MP 5, Made from 7 mm birch plywood, 30 x 30 mm Aluminium edges, 10 mm Foam padding, Medium steel rounded ball corners, 4 Butterfly...
Strong keyboard case
Custom made for the Yamaha Motif XS 7, Professional quality, 7 mm Birch plywood, 10 mm Foam padding, 30 mm Aluminium edges, Medium ball corners, 2...
19 U Studio Rack
12U of usable height straight down, 7U of usable height slanting slightly up, 56.5 cm Installation depth underneath, 42 cm Installation depth...
Marching Bass Drum Case
Made from super lightweight proprietary HPX² polymer, making it up to 40% lighter than other polymer cases, Impact resistant, Watertight, Oil and...
Tom Tom Case
Revolutionary roto-moulded d-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
Cases For Bass Drum
Revolutionary Roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
Floor Tom Case
Revolutionary Roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
Glass Door
Thon studio rack 12U, 2 Glass door hinges, 1 Lock with 2 keys, 1 Strike plate, Incl. fastening screws for mounting to the rack, Made in Germany
19U Studio Rack
Made from 19 mm panel, Rack front edge rounded, Front lockable roller shutter, Incl. Screw set, Made in Germany
Drum Case Set
Drum case set for hyper drive configurations (short tom tom shell), Extra hard polyethylene, Low weight, Optimal positioning of the carrying...
Rear Door for Studio Rack 10 U
2x Hinges, 1x Lock with 2 keys, 1x Lock plate, Mounting screws included, Made in Germany
Case
Water-, sand-, dust- and airtight,, acid resistant, pressure resistant, Impact resistant and almost indestructible, Ideal protection for your...
Equipment-case
Made from super lightweight proprietary HPX² polymer, making it up to 40% lighter than other polymer cases, Impact resistant, Watertight, Oil and...
18U Studio Rack
Kit for self-assembly, 18 U usable height, Up to 49.5 cm Installation depth, Stepless rack rail, 5 cm Furniture base, Includes screw set, Made in...
Transport case
The legendary Equipment-case model from USA, Shockproof, Waterproof, Oil and grease resistant, Pressure Equalization Valve - Balances the pressure...
Plastic Keyboard Case
Custom made case for the Korg Kronos 61, Made of high-quality 7 mm honeycomb plastic, 30 x 30 mm Aluminium edging, Foam padding, 2 Spring-loaded...
Snare Case
Revolutionary roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
Keyboard Wood Case
Specially made for Yamaha Tyros-2, Case of 7 mm birch plywood, 25x25 mm aluminum edging, 10 mm foam padding, Corners medium, 2 Snap locks, 2...
Base Rack 12U
Infinitely adjustable (no fixed increments or steps) rack rail with rubber insert 12U, Incl. Screw set, Built-in depth 43.5 cm, Built-in depth 48...
DJ trolley
Robust and waterproof 600D polyester surface, Water-repellent zipper, Ball-bearing and quiet running PU inline rollers, Robust and completely...
10" Snare Drum Case
Dimension 31.3 x 22.9 cm, Extremely durable, Made of waterproof plastic, High-quality design, Comfort grip, Stackable
Wheel
Suitable for the RockBag Hardware Caddy for drums, 110 cm
Rear Door for Studio Rack 18 U
2x Hinges, 1 Lock with 2 keys, 1 Strike plate, Mounting screws included, Made in Germany
Soft Case
Made of water resistant 420D polyester fabric with PVC coating, Robust zippers, Non-slip rubber feet
Carrying Case
Lightbridge One Softcase, Padded bag for the protection of various light effects of all brands, Ideal for mobile DJ's, karaoke systems or bands,...
Plastic Case
Custom made flight case for Dave Smith Instruments Prophet 12, Quality of 7 mm black plastic, 25 x 25 mm aluminum edging, Upholstered, 2 Spring...
Height increase for face-up racks
Suitable for Face-Up Rack 1 & 2-Bay, Texture finish
Tom Tom Case
Revolutionary roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
Transport bag
Suitable for various light effects, e.g. Martin, Stairville, ADJ, etc., With carrying handle and zipper
Keyboard case for the M-Audio Axiom 61 (1st generation)
Strong keyboard case, Made to measure for the M-Audio Axiom 61 (1st generation), Professional quality, 7 mm Birch plywood, 10 mm Foam padding, 25...
Transport Case
Suitable for Arturia Micro Brute, 7mm birch plywood, 22 x 22 mm aluminium edges, 1 Folding handle, 2 Butterfly latches, Steel ball corners,...
Tom Tom Case
Revolutionary roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
Rear Door for Studio Rack 20 U
2x Hinges, 1 Lock with 2 keys, 1x Lock plate, Mounting screws included, Made in Germany
Universal Hard Shell Bag
Interior lined with 15 mm foam and velvet, Sturdy 7 mm EVA construction, With zipper
Robust keyboard case
Made to measure for the Yamaha P121, Professional quality, Made from 6.5 mm birch plywood, 30 x 30 mm Aluminium edges, 2 x Spring-loaded butterfly...
Keyboard Case
Suitable for Clavia Nord Electro II 73, Case of 7 mm birch plywood, 25 x 25 mm Aluminum edges, Min. 10 mm foam padding, Medium steel corners, 2...
Snare Case
With a large accessory compartment for, e.g., a snare stand, etc., Shoulder strap
Microphone Flightcase
For 21 microphones, 22 x 22 mm Aluminium edges, 1 Suitcase handle, 2 Snap action locks, 2 Locking hinges, Small ball corners, Additional accessory...
Soft Case
Made of water resistant 420D polyester fabric with PVC coating, Robust zippers, Non-slip rubber feet
Keyboard case for the Korg M50 61
Strong keyboard case, Custom made for the Korg M50, Professional quality, 7 mm Birch plywood, 10 mm Foam padding, 25 mm Aluminium edges, Medium...
Case for Bass Drum
Revolutionary roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...
19" Rack
Open construction for acoustic transparency and good heat dissipation, Removable rear fabric frame, Full-width handle and rubberized 7 cm...
Microphone Flight Case for 7 Microphones
7 mm Birch plywood, 22 x 22 mm Aluminium edges, 1x Handle, 2x Drawbolts, 2x Locking hinges, Small ball corners, Additional accessories compartment,...
Soft Case
Made of water resistant 420D polyester fabric with PVC coating, Robust zippers, Non-slip rubber feet
Music Stand Bag
Water repellent nylon bag with double zipper, Large internal pocket for notes and external business card compartment, Includes shoulder strap,...
Case for a 10" Tom Tom
Short version for Hyper-Drive drums, Extremely durable, Made from water-resistant plastic, Very high-quality design, Comfortable handle, Can be...
Angle Rack
With 387 mm depth, From 7mm birch plywood, 25 x 25 mm Aluminium profile, 7 mm Hat profile, Stepless rack rail, 4 Large rubber feet, Incl....