Cases, Racks and Bags

Custom made for BluGuitar Amp 1 + Remote1, From 7mm birch plywood, Coated phenolic resin, 22 x 22 mm Aluminium edge, 1 Artificial leather grip, 2...

See Details

Made of coated 19 mm furniture panel, Installation depth 43 cm, Including set of screws, Made in Germany

See Details

Custom made flight case for Korg Krome 73, 7 mm High-quality black honeycomb plastic, Upholstered, 30 x 30 mm Aluminium edge, 1 Artificial leather...

See Details

Custom made flight case for Korg Krome 61 and King Korg, Quality of 7 mm Black plastic, 25 x 25 mm Aluminum edge, Upholstered, 2 Spring locks, 1...

See Details

Incl. 75 mm rubber wheels

See Details

19" Front panel with holes, 3U, Ideal for protecting device settings, Air permeable, therefore particularly suitable for power amplifiers, Powder...

See Details

For Peavey 3120, With 30 x 30 mm aluminium edges, At least 10 mm foam padding, 2 Folding handles, 2 Large spring-loaded butterfly locks, Made in...

See Details

Suitable for Moog One 8/16, PVC case made of 7 mm honeycomb plastic black, With side accessory compartment for power supply unit + cable, 30 x 30...

See Details

Extremely durable, Made from waterproof synthetic material, Very high quality design, Comfortable handle, Stackable

See Details

For 15" tom toms

See Details

For 9.5" racks

See Details

Via a special foam material (15 x 15 mm cubes), the internal dimensions can be arranged variably, Made of 10 mm plywood, 22 x 22 mm aluminium...

See Details

From 19 mm panel, Rack front edge rounded, Front lockable roller shutter, Incl. Screw set, Made in Germany

See Details

Revolutionary roto-moulded d-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...

See Details

1.5 mm Steel sheet, Top and bottom edge angled, With openings for 2x Harting mounting housing 24-pin load / 64 + 108-pin NF inserts

See Details

Angulated, Holes for 8 D - standard housing, Bent 30 ° to the front, Black housing, M3 Mounting holes, 19 "/ 1U

See Details

2x Hinges, 1x Lock with 2 keys, 1x Lock plate, Mounting screws included, Made in Germany

See Details

Custom made flight case with casters for Marshall AS 100D, Made from 7mm birch plywood, 30 x 30 mm Aluminium edge, 10 mm Foam padding, 2 Handles, 2...

See Details

For 4x12 guitar or bass box, On a caster board with 100 mm casters (2 with brakes), 9 mm birch plywood, 30 x 30 mm aluminium edges, 2x Large sprung...

See Details

The legendary equipment case from USA, Shockproof, Waterproof, Oil and grease resistant, Military standard, With pressure equalisation valve,...

See Details

Shaped case, With handle, Spring locks

See Details

Made of water resistant 420D polyester fabric with PVC coating, Robust zippers, Non-slip rubber feet

See Details

Made to measure specifically for Yamaha Tyros 5 with 61 keys, From 7 mm honeycomb plastic, 25 x 25 mm Aluminum edge, 10 mm Foam padding, Corners...

See Details

Custom-made transport case for Yamaha CP40 or CP4, Made of high-quality black 7 mm honeycomb plastic, Foam padding, 30 x 30 mm Aluminium edges, 1...

See Details

Self adhesive

See Details

Made of super-lightweight proprietary HPX² polymer and therefore up to 40% lighter than other polymer cases, Shock-proof, Water-proof, Oil and...

See Details

15 U usable height of the rack rail, 40 cm installation depth, 35 x 35 mm Aluminium edges with Nitril rubber, 8 Large folding handles, 3 Large...

See Details

Suitable for various light effects, e.g. Martin, Stairville, ADJ, etc., With carrying handle and zipper

See Details

Self-assembly kit, Made of coated panels, Installation depth selectable up to 495 mm, 5 cm Plinth, Incl. screw set, Made in Germany

See Details

Roto Mold Drum Series, Robust extremely stable polyethylene construction, Padded inside, Padding is riveted in the case, 2" Wide super...

See Details

Custom made flight case for Yamaha MOX 6 or MOXF 6, 7 mm high quality black honeycomb plastic, Upholstered, 25 x 25 mm aluminium edging, 1...

See Details

Revolutionary roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...

See Details

2x Hinges, 1x Lock with 2 keys, 1x Lock plate, Mounting screws included, Made in Germany

See Details

For wall mounting, Rubber-coated holding arm for up to two headphones, Also suitable for cables or the like, 153 x 40 mm

See Details

Made in Germany, Custom-made flight case for a Bugera V22, 7mm Birch multiplex, 30 x 30 mm Aluminium edges, 1 cm Foam padding, 2 Handles, 2...

See Details

The legendary equipment case model from the USA, Shockproof, Waterproof, Oil and grease resistant, Pressure equalisation valve - equalises the...

See Details

Assembly set, 10 RU effective height, Up to 49.5 cm installation depth, Continuously adjustable rack rail, 5 cm Furniture socket, Including set of...

See Details

12" and 13" toms, Efficient hard case for transportation of 2 toms, Inside diameter 39.9 cm

See Details

With plexiglass, For the protection of device settings, 19 ", 3U, Made in Germany

See Details

7 mm Birch multiplex, 30 x 30 mm Aluminium edges, 1 cm Foam padding, 2 Large sprung butterfly latches, 2 Handles, Steel corners, 4 x 100 mm swivel...

See Details

30 x 30 mm aluminium edges, Medium ball corners, 2 Spring loaded butterfly latches, 4 Heavyweight folding handles, Large locking hinges, Made in...

See Details

19" 12 U, 430 mm, Made of steel plates with 19" rack rails on the front and back, Powder coated with black textured paint, Dimensions 525 x 595 x...

See Details

For Clavia Nord Lead A1, 25 x 25 mm aluminium edges, 2 Snap locks with locking loops, 2 Locking hinges, 1 High quality artificial leather handle,...

See Details

Efficient hardcase, For transportation of 2 toms, For 10" & 12" toms, Inside diameter 36.0 cm, Max. depth 55.9 cm

See Details

For 9.5" racks

See Details

Cable trunk, 2x Foldable handles, 2x Locking hinges, 25 x 25 mm Aluminium edges, 2x Drawbolts, Medium ball corners, Manufactured in Germany

See Details

The legendary equipment case from the USA, Shockproof, waterproof, oil and grease resistant, Military standard, Automatic Pressure Equalization...

See Details

With handles and quick release clips, Diameter 81 cm, Maximum depth 61 cm, Including 75 mm rubber wheels

See Details

Custom made flight case for Nord Lead 4, 7 mm high quality black honeycomb plastic, Upholstered, 25 x 25 mm aluminum edge, 1 Artificial leather...

See Details

With horizontal ventilation slots, For 9.5" racks

See Details

Made in Germany, Custom-made hoods case with castors braked for Bugera V22, 7 mm Birch plywood, 30 x 30 mm Aluminium edges, 1cm Foam padding, 2...

See Details

Custom made flight case with casters for Roland Blues Cube Artist Combo, Made from 7mm birch plywood, 30 x 30 mm Aluminium edging, 10 mm Foam...

See Details

Custom made flight case for Korg Krome 88, 7 mm High-quality black plastic, Upholstered, 30 x 30 mm Aluminum edge, 1 Artificial leather handle, 2...

See Details

For Adam Hall rack drawers and service flaps

See Details

For G LAB Module MAC-4.4, SA-1, AUX A / B Switch, AUX 2x LOOP, Is supplied with masks for unused elements

See Details

For 14 microphones, 7 mm Birch plywood, 22 x 22 mm Aluminium edges, 1x Handle, 2x Drawbolts, 2x Fixed hinges, Small ball corners, Additional...

See Details

For the Roland RD-300NX, Made of 7 mm birch plywood, 30 x 30 mm Aluminium edges, Foam padding, 2 Medium spring-loaded butterfly locks, 2 Folding...

See Details

Revolutionary Roto-moulded D-shaped drum case design, Interiors are lined for optimal positioning and stability during transport, Patented Roto-X...

See Details

Blind sheet steel, Without openings, Made in EU

See Details

Thon studio rack 10U, 2 Glass door hinges, 1 Lock with 2 keys, 1 Strike plate, Includes mounting screws for mounting to the rack, Made in Germany

See Details

2 x 16 connectors in Neutrik BNC format, Alu U-shape, Vertical socket spacing 20 mm

See Details

The legendary equipment case, Shockproof, waterproof, oil and grease resistant, Rugged and lightweight, and approved by the American Air Navigation...

See Details

Abrasion-resistant, water-repellent 1680D nylon outer material, To protect lighting and music equipment, Reinforced base, Sides with 10 mm padding,...

See Details

12 U Useful height, 43 cm Installation depth, 5 cm Furniture base, Includes screw set, Made in Germany

See Details

Custom made for the Clavia Nord Stage 2 with 76 keys, Professional quality, 7 mm Honeycomb plastic, 10 mm Foam padding, 30 mm Aluminium edges,...

See Details

Revolutionary roto-moulded D-shaped drum case design, Padded on the bottom for best transport position and transport stability, Patented Roto-X...

See Details

Thon studio rack 18U, 2 Glass door hinges, 1 Lock with 2 keys, 1 Strike plate, Incl. fastening screws for mounting to the rack, Made in Germany

See Details

15 U usable height of the rack rail, 40 cm installation depth, 35 x 35 mm Aluminium edges with Nitril rubber, 8 Large folding handles, 3 Large...

See Details

2x Hinges, 1 Lock with 2 keys, 1 Strike plate, Mounting screws included, Made in Germany

See Details

Made from 9 mm birch plywood, Coated with black PVC, 35 x 35 x 3 mm Aluminium edges with rivet grooves, Male/Female lock profile, Large graded...

See Details

14 U Bottom rack, Rack of 18 mm panels, Infinitely adjustable (no fixed increments or steps) rack rail 14U, Built-in depth approx. 53 cm, Built-in...

See Details

Suitable for Yamaha Tyros 1 (without optional mount brackets), 7mm birch multiplex, 25 mm aluminum edge, 10 mm foam padding, Corners medium, 2 Snap...

See Details

Internal dimension 43.90 cm, Extremely durable, Made of waterproof plastic, High-quality design, Comfort grip, Stackable

See Details

Custom made for the Roland TD-30 drum sound module, including mounting plate, Made from 7 mm birch plywood, Phenolic resin coated, 22 x 22 mm...

See Details

1.5 mm Steel sheet, Top and bottom edge angled, With opening for 1x Harting mounting housing 24-pin load / 64 + 108-pin NF insert

See Details