Displaying 1-75 of 226 products
Gig Bag For Up To 6 Microphone Stand
Bag is 100 cm deep and has a cross section of 30 cm, 6 Separate inner compartments, so that the the stands do not damage each other
3/8" inner threads, 5/8" 27 pitch outer threads
For up to 6 microphone stands, 5 mm padding, Zipper
For 2 microphones, Screwed onto stands with 3/8 " thread, 2 Captive 3/8 " screws spaced between 60 and 172 mm
Speaker Stand Bag
Solid water-resistant Rok Tex surface material, For speaker stands and up to four microphone stands, Pyramids - base buttons, 10 mm / 0.39 " zip,...
Carrying Bag For Tripods
Suitable for 2 speaker / light stands, Tear-resistant nylon fabric with linen feel, Water repellent. Black with green K & M logo, 2x Inside...
Cable Clips for Speaker Stands
For 35-36 mm tubes
Transport bag for 2 spacer bars
Suitable for the spacer bars of Gravity LS 331 B and LS 431 B (not included), 10 mm Padding, Padded partition, Double zipper
Nylon bag for 1-4 microphone stands, Solid, water-resistant Rok Tex surface, 10 mm zip, Transparent card compartment
Fork for 35 mm Speaker Stands
Can be attached to tripod fork for two speakers, Can be attached to speaker stand tube with a diameter of 35 mm, Width adjustable from 310 to 490 mm
Mounting Rail for Stereo Microphone Pair
For tripod mounting of two microphones, Precise angle and distance markers for positioning the microphones according to ORTF, XY or small AB, Two...
LSTB-1, Case for a LST-310 Pro Lighting stand
Universal Microphone Holder
Universal microphone mount for various applications, The microphone can be mounted vertically upwards as well as angled at 90°, The hexagon bar...
For tube diameters up to 30 mm, 3/8" Threaded connector
1/2" and 3/8" inner threads, 5/8" 27 pitch outer threads, Galvanised
Microphone - Holding Rail
3/8 " Thumbscrew for holding a microphone, Clamped to the pipe diameter of 30 mm
Made from metal, Stable screw / clamp system, Mountable on any mic or music stand
For 20 König & Meyer orchestra stands and 20 tripods (KM 11870, KM 11960) with removable tub, 2 spring-loaded butterfly closures, 3 locking...
Universal Tablet Holder
Suitable for almost all table computers from 10.1"- 14", Mounting on (microphone) stand with 5/8" thread or pole mounting by means of included...
Speaker tilt connector
"Ring Lock", Speaker Tilt connector RING LOCK, Can be attached to speaker stands with tube diameter of Ø 35 mm, Unique, patented expanding mandrel...
Mounting Plate M20Steel flange plate with inner threads for use with distance bars with M20 threaded bolts. Can be screwed onto speakers.
Variable Inclination Adapter for Speaker Stands
With 1/4 "male to 3/8" female thread, Thread adapter 1/4 "female thread " 3/8 " external thread (included), Suitable for cameras and pocket recorders
5/8 " 27 Gg. Internal thread, 3/8 " External thread, Nickel
Speaker Mounting Adapter
Bolt-on to boxes, Attach to speaker stands with tube ø 35 mm, Without srews
VESA Monitor Mount for 35 mm Tripod Tubes
Hole spacings from 75 x 75 to 400 x 400, 4x Spacers, 8x M6 Countersunk screws, Base plate with 35 mm tripod flange and set screw
For 450 mm base plate, Suitable for Gravity WB 123 SET 1 B or Gravity WB 123 B, Made of durable 1680D nylon, With zipper, 5 mm thick padding
Quick Coupling for Microphone Mounts
Black aluminium housing, Incl. 5/8" to 3/8" thread adapter
Carrying bag for 2 large speaker stands
10 mm Padding, Double zipper
Ring Lock Adapter sleeve
Can be attached to speaker stands with tube diameter of Ø 35 mm, Secured by locking screws, With integrated patented expanding mandrel system for...
For 2 speaker stands, 15 mm Padding, Double zipper
For 4 microphones, Screw-mountable for stands with 3/8" threaded connector, 3/8" Knurled thumb screw
Microphone stand and tube combination
Extra high tube combination for special recording techniques or antenna positioning, Variable height adjustment from 1120 to 3150 mm, Thanks to the...
Bolt-on to loudspeakers with 2 mounting holes, Slip-on on to speaker stands with tube Ø 35 mm, Locking screw for mounting a stand, Fits for...
Sheet Music and Document Holder
Stable aluminium clamping element with protective plastic inserts, Black steel plate for sheet music, Tiltable music holder is infinitely...
Speaker Flange Mount for Tripod Stand
With 3/8" female and 3/8" male threads, Includes thread adapter 1/4" female to 3/8" male thread
Practical, easily mountable microphone arm, Complete with swivel arm, Can be bolted through secure prism clamping and locking screws to all...
3/8" Internal thread, 5/8" 27 Gg. External thread, Galvanised
Flat Round Base Plate for M20 Spacer Rods
Black zinc die-casting, Felt pads on the bottom
For iPad 2 , iPad 3 , iPad4, For mounting on microphone stands to pipe diameters of 30 mm, Effortless inserting and fixing for a secure hold, Can...
For 2 microphones with 3/8 " thread
Carrying bag for 1 large speaker stand
Suitable for 2 speaker tripods 21420, Tear-proof Nylon fabric with linen characteristics, Water-repellant outer material, Two inner compartments,...
Suitable for K&M 232, Diameter 18.1 mm, 3/8" Thread male and female
3 Parts, With 3 Manfrotto 013 Ø 16 mm spigots
Extension Adapter for K&M Spacer Tubes with M20 Thread
M20 thread to M20 female thread, 35 mm Diameter
A simple but very effective way to visually enhance a light or speaker stand, Combined with an LED spotlight or lighting effect positioned behind...
Base plate for M20 poles
With M20 screw thread, With its 9 kg of weight, it assures sturdy positioning, Powder-coated, die-cast iron
Suitable for every microphone stand, 3/8" Male thread to 3/8" female thread
For use with heavy microphones, Suitable for all one-piece K&M swivel arms with 3/8" thread connector or tube Ø 15 mm, Easy to mount
Can be screwed on to speakers, For speaker stands with tube diameters of 35 mm
Cable clip as a spare part for 20 mm tube, Suitable for the popular K&M microphone stands, e.g. model series 210, 260, 25x, 27x, Also suitable for...
Stereo Microphone Bar
For two microphones, Infinitely adjustable (no fixed increments) microphone distance from 6 - 29 cm, Easy to read scales for precise adjustment,...
For attachment directly to the microphone / music stand
Plate foot with weight plate
For distance rods with M20 screw thread, 14 kg Total weight for maximum stability, 9 kg Cast iron base and 5 kg weight plate made of die-cast iron
Flexible extension rail for microphone stands, 2 Movable arms for positioning the microphones for individual settings, Equipped with nondetachable...
M10x12, Suitable for all K & M speaker stands with 35 mm diameter
With hexagonal screw with 3/8 " threads, For vertical and horizontal connection
From 3/8" female thread to M6 male thread, Nickel plated metal, Suitable for Achat 104
For 36 mm tubes, On 3/8" threaded bolt, Large clamping screw for locking on the tripod
5° Inclination Adapter for Speaker Stands
Quick Release Adapter
For microphone stands and microphone holders, The quick release allows fast and safe unlocking, 5/8" Threaded connector, Faster way to change a...
Can be screwed on to music desks and tripods with a tube diameter of up to 30 mm using a clamping screw
Cable clip as a spare part for 15 mm extension arm or tube, Suitable for the popular K&M microphone stands, e.g. model series 210, 260, 25x, 27x
Quick coupling for microphone mounts
Black aluminium housing, Includes 5/8" adapter
Accessory Tray Made of Metal
For mounting on stands with 3/8" or 5/8" thread, Tiltable, Cutouts for cup-holders and cable management, Padded edition
Quick-Change Adapter for Clay Fishing
Compatible with all toners, tripods and microphone holders with 3/8" connection
Suitable for the standing aid Millenium ST-95
Ideal for weddings, corporate events, galas, etc., A simple but very effective way to visually enhance a light or speaker stand, In combination...
Laptop Stand/DJ Stand
With telescopic arms and tilt adjustment, Includes T-support for use on the table, Suitable for 5/8" threads
For 2 speaker and 2 microphone tripods, 10 mm Padding, Robust zipper, Comfortable straps in the middle and at both ends, Shoulder strap included
Drink Holder for Microphone Stands
For speaker and music stands with tubing diameters up to 35 mm, Clamp bracket 90° rotatable (also suitable for table mounting), Incl. Allen key
With 3/8" thread