Microphone Stands

Folding feet with die-cast base, 3/8" Thread in the microphone clip, Height is adjustable from 105 to 170 cm

See Details

Second microphone can be mounted next to the locking screw of the boom arm, 3/8" Threaded connector, Cast metal base, Foldable feet

See Details

Similar to K&M 210/2 but with telescopic boom arm, Diecast base, Foldable legs, Wide base, Height is adjustable from 900 to 1600 mm

See Details

The industry standard, With adjustable boom arm, Diecast base, Folding tripod legs, Wide feet construction

See Details

For table mounting, For radio, podcaster, pro and broadcaster, 3/8" Thread, Up to approx. 1.1 kg load, Rotates 360 degrees

See Details

Plastic base, Height is adjustable from 900 to 1600 mm

See Details

5/8" threaded connection, Height adjustable from 100 to 150 cm

See Details

Ideal for guitar amp, drums, wind instruments, etc., All metal construction, 3/8" Thread, Adjustable from 50 - 70 cm, Extendable gallows from...

See Details

Also suitable for low settings, Height is adjustable from 425 to 645 mm, Die-cast base with folding legs, Comes with telescopic boom arm

See Details

With impact noise dampening cast base, Height-adjustable tube construction

See Details

With 5/8 "thread, For recording studios and multimedia workstations, Black powder-coated,, Smooth adjustment with spring mounts, Weight 2.8 kg

See Details

Can be easily and smoothly moved around, With 5/8" threaded connector for recording studios and multimedia workstations, Black powder-coated,...

See Details

Round, heavy steel base, Height adjustable from 88 - 153 cm, 3/8" Connection thread

See Details

Extra high stand, Wide feet construction

See Details

With round base, Black, Handle with "Soft Touch" coating, Stable and durable metal round base, Base diameter approx. 24 cm, Height of the base...

See Details

Made of steel, For studio and stage, 10 kg weighing cast metal base, low center of gravity for high stability, 3 Swivel castors with brakes, 2...

See Details

Very stable design, With telescoping boom arm from 420 to 720 mm, Heavy cast iron round base ø 250 mm, With rubber insert to filter the impact...

See Details

For bass drums or special use, Very short and heavy legs provide maximum stability at small footprint, Legs are foldable for easy transport

See Details

Long tripod microphone stand with Soft-Touch surface, Telescopic boom arm with 2 tensioning screws, Heavy zinc die-cast base, Height adjustable...

See Details

Extra low for bass-drum and wind instruments, Including Telescopic boom, Very steady construction, Extendable boom arm (460-765mm), Plastic base,...

See Details

Small microphone stand with boom, Ideal for bass drum and guitar acceptance extendable arm - telescopic boom (460-765 mm)

See Details

Made from steel, Extendable foot for added stability, Plastic base, Adjustable height from 90 - 150 cm

See Details

Small foldable microphone stand with telescopic boom arm, The height is adjusted by 2-fold non-marring height-adjustment mechanisms, Swivel joint...

See Details

Made from steel, Extendable boom arm 125 - 205 cm, Height 165 - 350 cm, 5/8" Threaded connector

See Details

Particularly stable design, Heavy cast iron base ø 250 mm with rubber insert for impact sound attenuation, Complete with boom arm, Extentable...

See Details

Extendable tube construction, With 3/8" thread, locking washer and a handgrip., Tightening with a handy T-bar locking screw, Silent adjustment and...

See Details

Clamp or screw, Extendable arm, 3/8 "thread, Integrated microphone cable XLR male to XLR female, Especially for press conferences and broadcast

See Details

Diecast base with folding feet, Extendable arm from 600 mm to 955 mm, Height adjustment from 970 mm to 1640 mm

See Details

Sturdy metal construction, Height is adjustable from 90 cm to 145 cm (up to the joint), Includes boom arm, Solid cast iron base, Made in Germany

See Details

Zinc cast base with folding legs, Height adjustable from 92.5 to 163 cm, Telescopic arm 42.5-72.5 cm long, Surface preserving clamping elements,...

See Details

Special tripod for the positioning of the microphone in front of or in the bass drum, Extendable

See Details

With round base and gallows (impact sound absorbing rubber pad), 3/8" Thread, 2 Cable clips included

See Details

Stable universal microphone stand, With boom arm, 3 Folding feet with die-cast base, The square swivel joint has a handy wing nut

See Details

Very sturdy one-hand microphone stand with light round steel base Ø 275 mm, Easily adjustable by one-hand mechanism, "Elegance" Series, Impact...

See Details

Aluminium construction, Locking centre joint, 5/8" threaded connector, Table clamp, Pre-wired with XLR cable

See Details

One-hand grip, Long microphone stand with a round base and soft touch surface and one hand height adjustment, Without a boom, Heavy zinc die-cast...

See Details

Short tripod microphone stand with soft-touch surface, Telescopic boom with clamping lever, Heavy zinc die-cast base, Powder-coated, Includes Black...

See Details

Solo stand with heavy round cast-iron base, which is lined with a footfall sound absorbing rubber insert, Unwanted noise transmission to the...

See Details

With cast iron base and boom arm, Folding tripod legs, Height adjustment via clamping sleeve, One-piece arm with wing nut, Wide leg base,...

See Details

Stable microphone stand with light round cast-iron base Ø 300 mm, Height adjustable by a clutch, Topline series, Noise reductive rubber damping...

See Details

3/8" to 5/8" adapter, Loadable up to approx. 1.08 kg, Rotatable by 360°

See Details

Short tripod microphone stand with Soft-Touch surface, Telescopic boom arm with 2 tensioning screws, Heavy zinc die-cast base, Height adjustable...

See Details

Stable foot construction, 2-Piece folding design, 3/8 "thread, The solid tripod reaches a height of about 3 m

See Details

Long plate microphone stand with soft touch surface, Without a boom, Heavy zinc die-cast base, Height adjustable from 1000 to 1680 mm,...

See Details

With retractable boom arm, "EZ Clutch" height adjustment

See Details

Low settings, e.g. for bass drums or special use, Complete set with boom arm

See Details

Extendable tube construction, With 3/8" thread connector, Locking washer and a handle, Tightening with a handy T-bar locking screw, Silent...

See Details

Consists of tube assembly, boom arm and zinc die-cast base, Wide base guarantees stability, The square swivel joint has a handy wing nut,...

See Details

Long tripod microphone stand with Soft-Touch surface, 790 mm Long boom with 2 clamping screws, Heavy zinc die-cast base, Height adjustable from 100...

See Details

Made in Germany, 80 cm Boom arm (not removable), Folding tripod legs, Adjustable height from 98 to 167 cm, Exclusive microphone stand for any kind...

See Details

Short microphone stand 2-piece folding design, Plastic base with folding legs, Height 625-1480 mm, 3/8 "thread

See Details

Boom arm (telescopic), Zinc die-cast base, Wide base guarantees stability, The square swivel joint has a handy wing nut, Good-looking gray...

See Details

3-Piece folding aluminum tube combination, 3/8 "thread, Flocked grip, Only 0.89 kg light

See Details

With one-hand adjustment and boom arm, Round base with rubber

See Details

Black microphone stand with boom arm, Base diameter is only 660 mm, The large foot end caps help to make the stand stable, Height 890 - 1600 mm,...

See Details

Feet extendable and fixable by 3 locking screws, 3 Set screws for individual adjustment of the height

See Details

Very sturdy one-hand stand, With light round steel base Ø 275 mm, Soundlessly adjustable by one-hand clutch, With impact sound damping rubber...

See Details

With XLR connector and goose-neck, XLR Cable connection at the bottom of the pipe, Stable base made of cast iron

See Details

For Guitar Amplifiers, Made of metal, Direct mounting with sprung arm, Extendable from 19.5 to 34 cm, 14 cm gooseneck with 3/8 "threads

See Details

With anti-vibrating cast metal iron base, Chrome-plated surface

See Details

Solo stand with a metal base without a boom, Zinc die-cast base, Small circular foot, Easy to pull out by means of a clamping clutch, Height...

See Details

For drums or special recording techniques, Complete with extractable boom arm, Gray Soft-Touch powder coating

See Details

Complements the basic models 20811 and 21411, Extendable pipe combination with 3/8" connecting thread and adjustable compensation weight, Length...

See Details

Starline Series, Stable microphone stand with light cast iron round base Ø 275 mm, Height adjustable by means of clutch, Noise reductive rubber...

See Details

The square swivel joint has a handy wing nut, 3 Folding feet with die-cast base

See Details

YT3205, "ON AIR" aluminium microphone arm, With LED "ON AIR" signal

See Details

Elegant floor stand for AKG DAM capsules, With integrated light ring for optical control, Robust all-metal design with reflection-free paint, With...

See Details

Large stand base with braked, silent castors ("rollerblade" style), Long boom arm with counterweight, Easy height adjustment with rotating clutch

See Details

Can be pulled out up to 4 m through a 2-step tube combination, This makes it ideal for organ and choir recordings, Locking with an additional...

See Details

Height adjustable from 90 to 160.5 cm, 1-Piece folding, 3 Tilt feet

See Details

Classical solo stand and basic model for art. 210/2 and 210/9, Extremely stable by large foot circle, Wide support surfaces of the feet on the...

See Details

Height 1050 - 1600 mm, Extendable boom arm, length from 435 mm to 700 mm

See Details

Easily mountable microphone stand clamp, Extendable, swiveling by clamping screw stepless 360 °, 3/8 Threaded connection, Clamping range max. 53...

See Details

With noise reductive cast-iron base, Height adjustable from 87 to 157 cm

See Details

Telescoping shaft, Plastic base, 3 Metal feet, folded for easy transport, Locking the swing arm via a handy wing nut

See Details