Power Distributors

Sockets at a 45° angle, Rivetted plastic housing

See Details

Rivetted, Sockets at a 45° angle, Safety plug, Plastic housing

See Details

With bipolar illuminated switch, 8x Slots on the rear side, 19" Rackmount, 19" Angles can be reversed

See Details

19 "power strip / power distributor, 8 slots on the back, 19 "Rackmount, 19 "angle can be reversed, 1U

See Details

Sheet steel housing and metal front panel, Powder coated with black epoxy

See Details

With bipolar illuminated switch, 8x Slots on the rear side, 19" Rackmount, 19" Angles can be reversed

See Details

1 CEE 32 jack on the rear, 2 each circuit breaker per phase, Fault current circuit breaker FI 32A 4-pin, 0.03 A

See Details

Particularly suitable for the construction of large current distributions, For rack installation only 3U needed, 32 A Rotary current input via...

See Details

Blue Power Twist current input with quick-lock, 2 White-marked current outputs with quick-lock on each side as well as 4 earthed power outputs,...

See Details

Double-pole illuminated switch, 8 Mains outlets with protective contact on the back, 19” / 1 U rack mounting, 19" brackets can be flipped

See Details

Power strip/power distributor, 8 slots on the front side, 8 slots on the back, Front and back sockets are separately switchable, With illuminated...

See Details

Double-pole illuminated switch, 2x USB ports for charging (1000 mA), 8 Slots on the back, 19" Rackmount, 19" Rack ears can be reversed

See Details

8 Slots on the rear side, With bipolar illuminated switch, 19" Rackmount, 19" Angles can be reversed

See Details

A total of 16 outlets, each with 8 outlets on the front and back, With overvoltage protection, Single on / off switch for front and back

See Details

”C” circuit breakers per phase

See Details

Metal housing, 2x M10 mounting points

See Details

For use on trusses or on the ground, 32A CEE input and output, 6x Protection contact output 230V each with 16A fused (C16 circuit breaker), For the...

See Details

Distributes 3 x 32 A to 12 circuits (3 x 4), which are protected by a C-circuit with 16 A per circuit, 3 Volt and 3 Amp-meters on the front,...

See Details

19" Casing (483 mm), Particularly suitable for the construction of large current distributions, 63-A rotary current input over 1 meter long cable 5...

See Details

32 A input, 32 A output

See Details

Ideal for power supply on stage or in rigs, Sturdy metal housing with attachment option for the truss (2 internal threads M10), Power Twist input...

See Details

16 Amp, 3 Control lamps L1, L2, L3, With 2x M10 flight points for hanging from a truss, Metal housing

See Details

Ideal for power supply on the stage or on rig, Stable metal housing with attachment option for truss (2x M10 internal thread), Power Twist input...

See Details

With a two-pole illuminated switch, 8 Slots on the back, 19" Angle can be reversed

See Details

8 Sockets angled at 45°, Removable 2m main supply with 3x 1.5 mm², Power twist R1 connector and straight CEE 7/7 power plug, Illuminated power...

See Details

3 Phase control lights, Breaker per phase

See Details

Digital voltage and amperage monitoring per phase, Automatic fuses type C with 16 A per phase, Protective contact output on the front, 6...

See Details

With residual current circuit breaker, 6 Slots, 2 USB charging socket, 19" Rackmount, Rotating 19" bracket

See Details

With input and output divider (plug and socket CE blue), With 6 protective contact covered sockets, Indicator light for the phase, 2 Female M12...

See Details

For installation in the rig or on the ground, 1x PowerTwist input, 1x Power Twist Link output, 4x Power-twist outputs, Black metal housing,...

See Details

Front with 3 x 2 sockets (colour-coded), Input 5-pin CEE plug 16A / 380V with a 2 m connection cable

See Details

Main switch on the front, Built-in power cable with plug

See Details

france norm, 16 A / 250 V, Illuminated switch, Incl. angle bracket - can be used in 4 positions.

See Details

6 Protective contact sockets with hinged lids, For Outs and IN via CEE16 Amp, 3 Control lamps (L1, L2, L3), Metal casing

See Details

Power Twist TR1 input and output, 4x IP54 socket outlets with protective contacts and hinged cover, IP Protection class 20, 230 V Operating...

See Details

2 + 2 ways

See Details

Digital volt and ampere monitoring per phase, Automatic fuses type C with 16 A per phase, Protective contact output on the front, Residual Current...

See Details

With current and amp meter, With EMI / RFI noise filter, 10 A total rated current, Filter for reducing interference from high frequency noise and...

See Details

1 x Power twist input, 2 x Power twist output, 1 x Power Twist Thru output, Designed for use in flexible rig / theater / fair! extremely small -...

See Details

8 Protective contact slots, 19" / 1 U rackmount format, 3680 W maximum, Toggle switch

See Details

Riveted, Outgoing side 45 °, Supply cable H07RN-F 3G1,5 mm², Plastic casing

See Details

16/6, 19 "/ 2U, CEE 16 A with lead

See Details

32-A three-phase current input via 5x 6 mm² connection cable and plug, Protected by a 30 mA residual current circuit breaker (RCD), Voltage and...

See Details

With bipolar illuminated switch, 8x Slots on the rear side, 19" Rackmount, 19" Angles can be reversed

See Details

10 IEC C13 sockets, Resettable overload protection, Illuminated power switch, Includes 3 m mains supply and 10x 1.5 m IEC cable

See Details

Metal housing, 2x M10 mounting points

See Details

With 8 sockets, Illuminated switch, 2 USB charging ports, type A, Incl. angle bracket - can be used in 4 positions.

See Details

Riveted, Outgoing side 45 °, Supply cable H07RN-F 3G1,5 mm², Plastic casing

See Details

Phase voltages, Chained tensions, Phase currents, Frequency (Hz), Hour meter, Average current, Neutral current N, HAMA-M-72, High quality...

See Details

H07RN-F3G 1.5mm², Socket strip for professional use with mains switch

See Details

With bipolar illuminated switch, 8x Slots on the rear side, 19" Rackmount, 19" Angles can be reversed

See Details

2 USB ports for charging mobile phone, etc, Power cord to the unit with plug

See Details

For flexible power supply on stage or in the rig, 1 Power twist input, 1 Power twist bypass, 6 Safety sockets with cover, Robust steel profile housing

See Details

With stand, 16A CEE input, 2x 16A CEE output, 4x Protective contact output (on one phase)

See Details

Professional distributor in 19" housing with 32A input, With 2.0 m H07RN-F 5G4 cable, With integrated measuring device HAMA-M-72, Clear phase...

See Details

2 Main switches on the front for front and back sockets, Power cable with plug is built solidly in the device, 16 A / 250 V AC, Depth 7.5 cm

See Details

1 Grounding screw, 3 Phase lights, Sturdy sheet steel housing, 19" Housing 3HE

See Details

8 Slots on the back, 19" Rackmount, 19" Angles can be reversed, 1 HE

See Details

With bipolar illuminated switch, 8 Sockets on the back, 19" Rackmount, 19" Brackets can be rotated without tools

See Details

With bipolar illuminated switch, 12 Slots, 2 IEC outputs

See Details

Digital voltage and ampere monitoring per phase, Automatic fuses type C with 16 A per output, Residual current device

See Details

With preparation for 16 A cable to 6 x protective contact and 6 x protective contact distribution box with a strain relief for the preparation of a...

See Details

Practical 32 A power distributor in 19" housing, Especially suitable for installation in 19 "amplifier racks, 32 A three-phase current input and...

See Details

With bipolar illuminated switch, 8 Slots on the back, 19" Rackmount, 19" Angles can be reversed, 1 HE

See Details

Carrying handle, Clear labelling, Made in Germany

See Details

6-Channel Power Distributor with Power Twist Input and Output, Ideal for power supply on stage or in rigs, Sturdy metal housing with attachment...

See Details

12x 2-Pole circuit breakers (16 A - also separates the neutral conductor), Particularly suitable for setting up large high load distributions, Only...

See Details

With handle, With clear labeling, Made in Germany

See Details

With 1 Power Twist TR1 input and 3 Power Twist TR1 outputs, Rubber sealing caps, Metal casing, 2x M10 mounting points, 230 V Operating voltage,...

See Details

1 x 5-pin 32A CEE input, 2 x 5-pin 32A CEE outputs, With safety catch for simplified protection e.g. on trusses, Robust aluminium profile housing

See Details

4 Sockets, Including mounting bracket

See Details

1 Safety plug with hinged cover at the front, 6 Safety plugs with hinged lids at the rear

See Details

For installation in the rig or on the ground, 1x PowerTwist input, 1x Power Twist Link output, 8x Power-twist outputs, Black metal housing,...

See Details

Metal housing, 2 x M10 rigging points

See Details

Suitable for installation in 19" amplifier racks, 16 A CEE input and output, Indicator lights for the individual phases, 3 Safety sockets on the...

See Details