The Laney L20T-410 valve combo amplifier celebrates Laney's 40 years of manufacturing world-class valve amplifiers with vintage and modern tones.

The Laney L20T-410 combo is all valve, with 3 x 12ax7 / ECC83 preamp valves and 4 x EL84 output valves, Class-A parallel single-ended circuitry for classic, warm valve tone and a birch plywood cabinet loaded with 4 x Jense P10R 8-ohm speakers. The LS20T-410 combo is feature loaded: 2-channels, Clean and Drive, 2-inputs Hi gain and Lo with the input attenuated by half. Sealed Gold plated contact relays, jack sockets, Hi and Low gain inputs, and Gold plated printed circuit boards for minimum sound coloration. EQ provided by passive Bass, Middle and Treble, Tone boost and cut active on the top end of the signal, and Bright switch for edge and picking emphasis on the Drive channel and brightness and life to trebles on the Clean. Drive sets the level of valve preamp drive, increase to dirty up your tone. Effects Loop Send and Return for external rack mount effects.

The Laney L20T-410 combo's birch plywood cabinet mounts a unique Tilting Mechanism, allowing the cab to be used either upright or tilted back.

Parallel single-ended class-A circuitry, as featured on the Laney L20T-410 combo, means the 4 EL84 output valves are wired in parallel to one side of the L20T-410 output transformer's primary. The other side of the transformer primary is wired to the power supply. While giving less output power than the alternative push-pull circuitry, single-ended class-A produces more even order harmonics when over-driven. A great advantage to guitar players as even order harmonics provide the rich tone associated with classic class-a valve guitar amps.

LANEY L20T-410 LIONHEART COMBO AMPLIFIER FEATURES
Power RMS: 20 Watts.
Inputs: 2x Jack, Hi and Lo gain.
Channels: Clean and Drive.
Equalisation: Passive Bass, Middle and Treble.
Bright Switch.
Preamp Valves: 3 x 12ax7.
Output Valves: 4x EL84.
Class: Class-A Parallel Single-Ended.
Channel Controls: Gain for Clean channel, Gain and Volume for Drive channel.
Master Section: Global EQ, Reverb and Tone controls.
EQ: Passive Bass, Middle and Treble, Tone Boost and Cut and Bright Switch.
Type 4 large spring line reverb.
Footswitch: FS2 Included, switches between Clean and Drive channels, and turns Reverb On/Off.
Speaker connections: 3 x Jacks.
Effects FX Loop.
Impedance: 4, 8 and 16 ohm.
Drivers: 4x10-inch Jensen P10-R Alnico magnet loudspeakers.
Baffle: Marine Grade Plywood.
Cabinet Design: Marine Grade Plywood cabinet with retro banding strip, leather strap handle and folding tilt back mechanism.
Gold plated PCBs and Jacks, Hi and Low Gain inputs.
Oversized power supplies and output transformers for big powerful sound and reliability.
Weight 30.5 Kg.
Dimensions (mm) 636 x 559 x 285.

Further information on the Laney L20T-410 Lionheart Series Boutique Combo Amp